Freshly harvested corn at moisture content of 24% wet basis (w.b.) was intermittently dried with infrared (IR) at intensities 2.39, 3.78, and 5.55 kW/m2 for 30, 50, and 180 s to safe storage-moisture content of 13% (w.b). Microbial load reduction, energy use and corn sensory and pasting qualities were evaluated. Experiments were carried out at product-to-emitter gap size of 450 mm. Increasing IR intensity from 2.39 to 5.55 kW/m2 resulted in average microbial load reductions of 2.6 and 2.9 log CFU/g at 180 and 30 s of intermittent IR heating, respectively. IR treatments reduced corn paste viscosity and stress cracks (p < .05), but insignificantly impacted corn color (p > .05). Drying corn to storage-moisture content with IR intensities 2.39 and 5.55 kW/m2, required 7.5 and 15.0 MJ/kg of water removed, respectively. Accelerated, Scaled-up IR drying and decontamination was achieved without affecting the corn quality; optimized treatments could potentially improve throughput and energy efficiency. Freshly harvested, high moisture content corn must be dried within short duration to about 12–14% (w. b.) to prevent mold growth and preserve the overall corn quality. This research presents the following practical applications:
Vegetable soybean (Edamame) blanching with hot water/steam is an energy- and water- intensive process that may also result in compromised product quality. The effectiveness of infrared (IR) heating to dry and simultaneously blanch Edamame was investigated at heating intensities of 11.06, 8.43 and 6.99 kW/m2. Temperature, weight, texture, and green intensity of heated samples for various durations were determined. In general, product weight decreased during IR heating. The largest weight reduction (9.5 %) was achieved after 100 s of heating at the highest IR heating intensity. Hardness was reduced alongside treatment duration, reaching the lowest values (11172.9-10847 N) at 100 or 120 s despite heating intensity. The highest green intensity was recorded (0.33) for treatments at 100 or 120 s. The new process combined drying and blanching into one step which potentially improves processing efficiency and product quality.