Decarbonizing the steel industry relies on a transition from carbon-intensive blast furnace technology to scrap-based secondary steelmaking using electric arc furnaces. This transition introduces tramp elements and leads to their gradual accumulation, which can significantly influence the functional properties of chemically sensitive steel grades. In this study, the combined impact of several tramp element contents on the phase transformations, microstructure and mechanical properties of a 0.3 wt.% C low-alloyed steel was investigated. To achieve this, a reference alloy was produced using the conventional blast furnace production route. It was then compared with two trial alloys, which contained intentionally elevated levels of tramp elements and were produced through an experimental melting route designed to simulate scrap-based electric arc furnace production. The experimental characterization included light optical and electron microscopy, electron back-scatter diffraction, in situ synchrotron high-energy X-ray diffraction coupled with dilatometry, and Vickers hardness testing. The results revealed the formation of displacive transformation products such as martensite and showed that austenite was retained in the tramp element-enriched trial alloys. The combination of solid solution strengthening and martensitic transformation led to a gradual increase in hardness. These findings underscore the critical role of tramp elements in determining the microstructural and mechanical response of steels produced from scrap-based feedstock.
18 June 2025 in Journal of Materials Research and Technology
Cementite morphology is known to govern the mechanical performance of steels, yet its influence on actual crystal structure, like unit cell parameters, is not well quantified. Here, we show that cementite morphology-dependent surface stresses generate measurable lattice distortion in nanocrystalline cementite. Lamellar and spheroidized cementite powders were extracted from a Cr-alloyed hypereutectoid steel and characterized by high-energy synchrotron X-ray diffraction combined with double-Voigt profile modeling. Despite a higher Cr content in spheroidized cementite, lamellar cementite exhibits systematically larger lattice parameters, corresponding to an average volumetric lattice strain of 6.3 ± 2.2 × 10−4. This counter-intuitive expansion is rationalized by a continuum mechanics framework that incorporates the orthorhombic elastic anisotropy of cementite and particle morphology. The model predicts the sign and magnitude of morphology-induced lattice strain, demonstrating that surface-stress effects constitute a systematic bias in diffraction-derived lattice parameters of nanostructured carbides.
Cementite morphology is known to govern the mechanical performance of steels, yet its influence on actual crystal structure, like unit cell parameters, is not well quantified. Here, we show that cementite-morphology-dependent surface stresses generate measurable lattice distortion in nanocrystalline cementite.Lamellar and spheroidized cementite powders were extracted from a Cr-alloyed hypereutectoid steel and characterized by high‑energy synchrotron X‑ray diffraction combined with double‑Voigt profile modelling. Despite a higher Cr content in spheroidized cementite, lamellar cementite exhibits systematically larger lattice parameters, corresponding to a volume‑average lattice strain of 6.3 ± 2.2 × 10-4.This counter‑intuitive expansion is rationalized by a continuum‑mechanics framework that incorporates the orthorhombic elastic anisotropy of cementite and particle morphology. The model predicts the sign and magnitude of morphology‑induced lattice strain, demonstrating that surface‑stress effects constitute a systematic bias in diffraction‑derived lattice parameters of nanostructured carbides.