Superconducting nanowire single-photon detectors (SNSPDs) are the highest-performing photon-counting technology in the near-infrared region. Because of delay-line effects, large-area SNSPDs typically trade off timing resolution and detection efficiency. This unavoidable fundamental constraint might limit their future deployment in demanding scientific applications. Here we introduce a detector design based on transmission-line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our best niobium nitride differential SNSPD achieves a system detection efficiency of at and at . The lowest system jitter is at and at , limited by intrinsic contributions. These detectors also achieve sub-100-ps timing response at 1/100 of the maximum level, at 775 nm and at , enabling time-correlated single-photon counting with high-dynamic-range response functions. Furthermore, because of the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for quantum computing, quantum communication, and many other scientific applications.
The intention of this dictionary is to define relevant terms and metrics used in the characterization of single-photon detectors and sources with the goal to promote better understanding and communication of those metrics across the single-photon technology community. With the recent emergence and significant growth of a “quantum-component industry,” the need for common definitions of terms is clear and pressing. For example, a recent workshop sponsored by the Quantum Economic Development Consortium [QC23] identified the need for a common set of definitions for single-photon device performance metrics [QED23]. There are some existing documents relevant to this need, but they are focused on somewhat different purposes or on one specific application. For example, the ETSI document [LL09, ETS18] focuses specifically on the application of quantum key distribution, and there is a vocabulary resource under the auspices of the CIE (International Commission on Illumination). That CIE resource [CIE20] is focused on the illumination industry. For completeness we also mention several publications which contain some compendiums of single photon definitions [EFMP11, MPFB13a, MSSM20]. Our effort here is intended to compliment and build on those existing reference documents, to create a dictionary independent of a particular single-photon application (for long-term relevance) and to promote clarity and understanding when terms and metrics relevant to single-photon sources or detectors are used by the community. This document also seeks to dispel common misconceptions and to make a few subtle distinctions that will benefit the community. This document may form the basis for a future standards document. With that as a goal, we facilitated a thorough peer-review by fellow National Institute of Standards and Technologies colleagues, the Quantum Economic Development Consortium, representatives of other National Metrology Institutes, and the larger single-photon community. We hope that this document will promote a community-wide consensus on the definitions herein and help facilitate the growth of the single photon industry.
Reducing afterpulsing in single-photon avalanche diodes (SPADs) allows operation with shorter recovery times and higher detection rates. Afterpulsing in SPADs can be reduced by reducing the total avalanche charge. We use a periodic quenching system to arbitrarily vary the latency between the onset of an avalanche and the application of the quench, allowing us to characterize the afterpulsing behavior when the current flow is halted at time scales that are significantly shorter than can be achieved by standard active-quenching systems. Three different reach-through SPADs are characterized, and with prompt quenching we observe reductions in afterpulse probability of as much as a factor of 12. Beyond improving detection rates, reducing the total avalanche charge can also allow operation with higher excess bias voltages, which enables higher detection efficiency and more precise timing resolution.
We demonstrate a method that allows a high-efficiency single-photon-avalanche diode (SPAD) with a thick absorption region (>10 μm) to count single photons at rates significantly higher than previously demonstrated. We apply large (>30 V) AC bias gates to the SPAD at 1 GHz and detect minute avalanches with a discrimination threshold of 5(1) mV by means of radio frequency interferometry. We measure a reduction by a factor of ≈500 in the average charge per avalanche when compared to operation in its traditional active-quenching module and a relative increase in >19% in detection efficiency at 850 nm. The reduction in charge strongly suppresses self-heating effects in the diode that can degrade performance at high avalanche rates. We show that the single-photon detection system maintains high efficiency at count rates exceeding 108 s−1.