Xu Dong

Dr. Xu Dong


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 February 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XDXu Dong
Xu Dong
MWMingdong Wang
Mingdong Wang
MSMinyuan Song
Minyuan Song
NHNing Hou
Ning Hou
The backfilling of lime soil in ultra-deep and ultra-narrow foundation trenches is a difficult construction link, and ordinary-cemented soil has drawbacks, including poor strength, impermeability, and frost resistance. To solve these problems, fly ash (FA)–water glass (WG)-composite-cemented soil is developed based on a background project. The three-factor orthogonal tests are conducted on the unconfined compressive strength (UCS) of the composite-cemented soil, and the optimal engineering mix proportion is proposed for the FA-WG-composite-cemented soil. Its UCS is compared with that of cemented soil only doped with FA or WG (FA- and WG-cemented soil). In addition, the cyclic wetting–drying tests, cyclic freeze–thaw tests, and impermeability tests are carried out to study the endurance of the composite-cemented soil in cold regions rich in water. The hydration products of the composite-cemented soil are investigated through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis, and the curing mechanism of the composite-cemented soil is discussed from the microscopic perspective. The research results indicate that the mixing ratio of cement is crucial to the strength development of the cemented soil; the mixing ratio of FA greatly influences the strength development of the cemented soil in the middle and late stages; the mixing ratio of WG only slightly affects the strength. The ratio of cement, FA, and WG of 9%:12%:3% is the optimal engineering mix proportion of the composite-cemented soil. Compared with ordinary-cemented oil and FA- and WG-cemented soil, the composite-cemented soil shows significantly improved compressive load-bearing capacity. The permeability coefficient of the composite-cemented soil is always obviously lower than that of the ordinary-cemented soil after any curing period. Despite the mass loss, the composite-cemented soil is superior to the ordinary one in overall endurance after wetting–drying and freeze–thaw cycles. Through SEM and XRD analysis, the content of hydration products of the composite-cemented soil is found to be obviously higher than that of ordinary-cemented soil after any curing period, and the hydrates exert stronger cementing action on soil particles in the composite-cemented soil. The contents of C-S-H gel and Aft crystals in the composite-cemented soil are apparently larger than those in the ordinary-cemented soil. Under the alkali activation of WG, the FA produces free SiO32− and AlO2−, which undergo the polymerization reaction with Ca2+ to generate C-S-H gel and C-A-H gel, further promoting the hydration of cement.

17 February 2023 in Coatings
Verified
Journal Article
Open access
PDF file
LJLi Jin
Li Jin
YCYongshu Cui
Yongshu Cui
DXDalu Xiong
Dalu Xiong
ZLZhongmei Lu
Zhongmei Lu
XDXu Dong
Xu Dong
TZTiancheng Zhou
Tiancheng Zhou
In order to explore the toughening performance and failure mechanism of hollow slab beams strengthened with prestressed steel strand polyurethane cement composite, three test beams (L1–L3) were strengthened and one test beam (L0) was used as a comparison. The influence of different tensile stresses of steel strand and fiber additions on the flexural bearing capacity of the hollow slab beams, was studied. The cracking characteristics, load deflection relationship, ductility and strain of each test beam were compared and analyzed. The test results showed that the toughened material was well bonded to the hollow slab beam and the steel strand, which effectively inhibited the development of cracks in the test beams. The flexural bearing capacity of the strengthened test beams was significantly improved. The use of prestressed steel strand polyurethane cement composite material effectively improved the flexural bearing capacity of the test beams, and this reinforcement process can be further extended to engineering applications.

21 August 2025 in Coatings
Verified
Journal Article
Open access
PDF file
BLBing Luo
Bing Luo
XDXu Dong
Xu Dong
RLRong Li
Rong Li
DSDunlei Su
Dunlei Su
YQYuanhui Qiao
Yuanhui Qiao
CZChenhao Zhang
Chenhao Zhang
To address the issues of numerous influencing factors on material quality, difficulty in determining the optimal mix proportion, and the need to clarify the formation mechanism when foam concrete is used as an internal mold for prefabricated components, this study conducted orthogonal tests to investigate the influence laws of fly ash content, foam content, foaming agent dilution ratio, and water–binder ratio on the dry density and compressive strength of foam concrete, and determined the optimal mix proportion via analysis of variance (ANOVA). Additionally, scanning electron microscopy (SEM) tests were performed to analyze the effects of these four factors on the microscopic pore morphology of foam concrete from a microscopic perspective, thereby revealing its formation mechanism, and engineering applications were carried out. The results show that the primary-to-secondary order of factors affecting the dry density and compressive strength of foam concrete is as follows: foam content (B) > water–binder ratio (D) > foaming agent dilution ratio (C) > fly ash content (A). The optimal mix proportion is 5% fly ash content, 18% foam content, a 30-fold foaming agent dilution ratio, and a water–binder ratio of 0.55. Under this mix proportion, the pore size of foam concrete ranges from 200 μm to 500 μm with uniform distribution, and the pore spacing is between 20 μm and 30 μm, with almost no connected pores. When the foam concrete slurry sets and hardens, hydration products such as calcium silicate hydrate (C-S-H) gel, calcium hydroxide, ettringite (AFt), and monosulfate aluminate (AFm) are generated around the bubbles. The mechanical properties of foam concrete are afforded by the combined action of these hydration products and the pore structure.

10 September 2020 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
XDXu Dong
Xu Dong
FCFengkun Cui
Fengkun Cui
XLXiudong Li
Xiudong Li
SXSongji Xu
Songji Xu
To study the negative temperature gradient models of a rail transit U-shaped girder during the winter season, a U-shaped rail transit girder was researched in Qingdao. The temperature field of the midspan section was observed for a 48-h period during the winter. The maximum vertical and horizontal temperature difference distributions were obtained, and the negative temperature gradient models for the winter were established. The results show that the vertical temperature gradient models of the web and bottom slab should be considered. The vertical temperature gradient model of the web is a piecewise function composed of exponential and linear functions. The vertical temperature gradient model of the bottom slab is an exponential function. The transverse temperature gradient of the web is obvious, whereas the transverse temperature gradient of the bottom slab is slight.