Ning Hou

Dr. Ning Hou


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 February 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
XDXu Dong
Xu Dong
MWMingdong Wang
Mingdong Wang
MSMinyuan Song
Minyuan Song
NHNing Hou
Ning Hou
The backfilling of lime soil in ultra-deep and ultra-narrow foundation trenches is a difficult construction link, and ordinary-cemented soil has drawbacks, including poor strength, impermeability, and frost resistance. To solve these problems, fly ash (FA)–water glass (WG)-composite-cemented soil is developed based on a background project. The three-factor orthogonal tests are conducted on the unconfined compressive strength (UCS) of the composite-cemented soil, and the optimal engineering mix proportion is proposed for the FA-WG-composite-cemented soil. Its UCS is compared with that of cemented soil only doped with FA or WG (FA- and WG-cemented soil). In addition, the cyclic wetting–drying tests, cyclic freeze–thaw tests, and impermeability tests are carried out to study the endurance of the composite-cemented soil in cold regions rich in water. The hydration products of the composite-cemented soil are investigated through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis, and the curing mechanism of the composite-cemented soil is discussed from the microscopic perspective. The research results indicate that the mixing ratio of cement is crucial to the strength development of the cemented soil; the mixing ratio of FA greatly influences the strength development of the cemented soil in the middle and late stages; the mixing ratio of WG only slightly affects the strength. The ratio of cement, FA, and WG of 9%:12%:3% is the optimal engineering mix proportion of the composite-cemented soil. Compared with ordinary-cemented oil and FA- and WG-cemented soil, the composite-cemented soil shows significantly improved compressive load-bearing capacity. The permeability coefficient of the composite-cemented soil is always obviously lower than that of the ordinary-cemented soil after any curing period. Despite the mass loss, the composite-cemented soil is superior to the ordinary one in overall endurance after wetting–drying and freeze–thaw cycles. Through SEM and XRD analysis, the content of hydration products of the composite-cemented soil is found to be obviously higher than that of ordinary-cemented soil after any curing period, and the hydrates exert stronger cementing action on soil particles in the composite-cemented soil. The contents of C-S-H gel and Aft crystals in the composite-cemented soil are apparently larger than those in the ordinary-cemented soil. Under the alkali activation of WG, the FA produces free SiO32− and AlO2−, which undergo the polymerization reaction with Ca2+ to generate C-S-H gel and C-A-H gel, further promoting the hydration of cement.

12 September 2023 in Coatings
Verified
Journal Article
Open access
PDF file
XZXianglong Zuo
Xianglong Zuo
SZShen Zuo
Shen Zuo
LJLi Jin
Li Jin
NHNing Hou
Ning Hou
HZHaoyu Zuo
Haoyu Zuo
TZTiancheng Zhou
Tiancheng Zhou
In order to solve the global problem of bridge head jumping caused by the insufficient compaction of the roadbed in the transition section of highways and bridges, a desulfurization gypsum–fly ash flowable lightweight soil without vibration, capable of self-compaction, low bulk density, and economic and environmental protection, has been developed. This study selected low-grade cement, industrial waste (fly ash and desulfurization gypsum), and Yellow River silt as the raw materials for the design of the mix ratio of a desulfurization gypsum–fly ash flow-state lightweight soil mix. Through multiple indoor experiments, the influence of cement content, silt content, and the fly ash/desulfurization gypsum quality ratio on its fluidity and mechanical properties was systematically studied. The stress–strain relationship under uniaxial compression was analyzed and the strength formation mechanism was revealed through scanning electron microscopy (SEM). The results show that the mechanical properties of the prepared desulfurization gypsum–fly ash flowable lightweight soil meet the engineering requirements. Increasing both the cement and fly ash content results in the decreased fluidity of the desulfurization gypsum and fluidized fly ash. However, as the mass ratio of fly ash to desulfurization gypsum increases, the fluidity reaches its maximum when the mass ratio of fly ash to desulfurization gypsum is 2:1. Based on the stress–strain relationship test results, a uniaxial compressive constitutive model of the desulfurization gypsum–fly ash flowable lightweight soil was proposed. The model was fitted and analyzed with the test results, and the correlation was greater than 0.96. The high degree of agreement showed that desulfurization gypsum can promote the disintegration of fly ash, thereby increasing the specific surface area. This provides more contact points, promotes the hardening process, and enhances the interlocking force between particles and the formation of cementitious substances, further enhancing strength.

17 October 2026 in Transportation Infrastructure Geotechnology
Verified
Journal Article
Closed access
PDF file
YSYingguang Shi
Yingguang Shi
FHfeng huang
feng huang
CZChungang Zhang
Chungang Zhang
SLShuhan Lai
Shuhan Lai
NHNing Hou
Ning Hou
GWGuihe Wang
Guihe Wang