In Directed Energy Deposition (DED), modeling the molten pool temperature field is crucial for precise temperature control, process optimization, and quality improvement. However, conventional numerical methods suffer from limitations such as high computational costs and poor transferability. This study proposes a physics-informed neural network with dynamic learning rate (DLR-PINN) model, which integrates transfer learning to enable rapid prediction of 3D temperature fields and dimensions of molten pools across process parameters. Its validity is verified by a finite element method (FEM) calibrated via single-track DED experiments. Results show that DLR-PINN exhibits superior convergence and stability compared to traditional PINN. Combined with transfer learning, training efficiency is significantly enhanced, with a single prediction taking only 10 s. Using the FEM as the benchmark, it achieves a mean absolute percentage error (MAPE) of 0.53% for temperature prediction, and MAPE of 3.69%, 2.48%, and 6.96% for molten pool dimension predictions, respectively. Sensitivity analysis of process parameters reveals that scanning speed has a significantly greater regulatory effect on molten pool characteristics than laser power. Additionally, the temperature field of the flat-top heat source is more uniform than that of the Gaussian heat source, which is more conducive to improving printing quality and efficiency.
Resolving the dichotomy between wide detection ranges and low mechanical hysteresis remains a critical challenge in flexible electronics, largely governed by the intrinsic viscoelastic creep of polymeric dielectrics. Drawing inspiration from the distinctive load-bearing mechanisms of traditional Chinese Sparrow Brace architecture, we report a mechanically optimized tilted micro-architecture designed to enhance structural resilience. Unlike conventional soft elastomeric pillars that easily succumb to mechanical failure, this BOPS-based tilted geometry provides excellent load-bearing capacity, effectively preventing premature failure. Finite element analysis (FEA) confirms that this tilted geometry forces a fundamental shift from conventional bulk compression to structural bending. Because this bending-dominated architecture drives rapid elastic recovery, it significantly mitigates the severe effects of the polymer’s viscoelastic creep under the tested loading conditions, achieving reliable signal reversibility with low hysteresis. We fabricated this specific architecture via programmable femtosecond laser direct writing (FsLDW) on biaxially oriented polystyrene (BOPS) films, harnessing the material’s entropy-driven self-growth kinetics. By merging this localized growth mechanism with the architectural design, we effectively bypassed the complexities of traditional molding, achieving mask-free, in situ growth of large-scale, highly uniform dielectric micro-arrays. The resulting sensor delivers a remarkably broad working range (up to ~2.28 MPa) coupled with a negligible recovery error (~1.3%), an agile dynamic response (~70/80 ms), and consistent operational durability. Ultimately, this work combines architecture-inspired structural design with advanced femtosecond laser surface microengineering, providing a conceptually novel and scalable pathway for next-generation flexible sensing.