In the process of producing ferroalloys, a large amount of secondary raw materials is formed, including slag, aspiration dusts and sludge. The recycling of secondary raw materials can create resources and bring environmental and economic benefits. Wet secondary raw materials (WSRMs) are characterized by a high chromium oxide content (averaging 24%), but due to their high moisture levels, they cannot be directly used in arc furnaces. As a strategic approach, mixing WSRMs with drier, more chromium-rich dusts (up to 45% Cr₂O₃) has been proposed. This not only reduces the overall moisture content of the mixture but also enhances the metallurgical value of the charge material. This paper presents the results of laboratory studies on the agglomeration of secondary wet raw materials using briquetting, extrusion and pelletizing methods. The main factors influencing the quality of the resulting product were analyzed, including the method of agglomeration, the composition of the mixture, as well as the type and dosage of the binder component. The strength characteristics of the finished agglomerated samples were evaluated in terms of resistance to splitting, impact loads and falling. Notably, the selected binders are organic and polymer substances capable of complete combustion under metallurgical smelting conditions.

The depletion of global reserves of high-quality sulfide nickel deposits, coupled with the steady growth of nickel demand, has led to increased interest in the processing of oxidized (lateritic) nickel ores, including deposits with significant resource potential in the Republic of Kazakhstan. This paper provides an overview of global nickel ore reserves and their distribution, as well as the major nickel deposits in Kazakhstan, which are primarily located in the Aktobe, East Kazakhstan, Kostanay, and Pavlodar regions. Pyrometallurgical processing routes for lateritic nickel ores are also considered. Conventional production technologies, including the Rotary Kiln–Electric Furnace (RKEF), Krupp–Renn process, blast furnace smelting, Vaniukov process, and ISASMELT process, are reviewed, and their process flow diagrams are presented. These methods typically process lateritic nickel ores containing more than 1.2% Ni, whereas Kazakhstan ores are characterized by lower nickel grades, generally in the range of 0.75–1.1%. The advantages and limitations of conventional processing routes are analyzed, and the factors limiting the effective beneficiation of lateritic nickel ores using traditional methods are identified. The present study substantiates the feasibility of producing nickel-containing alloys from lateritic nickel ores using a metallothermic reduction approach. This method is based on the reduction of nickel and iron oxides using metallic reductants, which enables more selective extraction of target components and the formation of alloys with controlled composition. Metallothermic reduction is of particular interest for the processing of low-grade lateritic ores, as it allows the production of nickel-containing alloys without prior beneficiation, at lower energy consumption, and with reduced sensitivity to variations in the chemical and mineralogical composition of the raw materials. Therefore, this approach is considered a promising direction for the processing of lateritic nickel ores in Kazakhstan.