The physical mechanism of the experimentally observed dependence of passive intermodulation (PIM) in printed circuits on conductor surface roughness is studied. It is shown that electrothermal (ET) nonlinearity, arising due to heating of imperfect conductors by high-power carriers in a multicarrier system, is correlated with conductor surface roughness and has a unique signature. Carriers modulate the conductor resistivity, skin depth, and surface impedance which generate PIM products. The detailed analysis demonstrates that ET-PIM depends on the conductor resistivity, shape, and roughness profile and also on the electric and thermal properties of the substrate. Their effects on PIM are illustrated by examples of uniform microstrip lines with different conductor and substrate materials, and periodically perturbed and meandered microstrip lines.
Scatterometry is an important nonimaging and noncontact method for optical metrology. In scatterometry certain parameters of interest are determined by solving an inverse problem. This is done by minimizing a cost functional that quantifies the discrepancy among measured data and model evaluation. Solving the inverse problem is mathematically challenging owing to the instability of the inversion and to the presence of several local minima that are caused by correlation among parameters. This is a relevant issue, particularly when the inverse problem to be solved requires the retrieval of a high number of parameters. In such cases, methods to reduce the complexity of the problem are to be sought. In this work, we propose an algorithm suitable to automatically determine which subset of the parameters is mostly relevant in the model, and we apply it to the reconstruction of 2D and 3D scatterers. We compare the results with local sensitivity analysis and with the screening method proposed by Morris.
The development of actinic mask metrology tools represents one of the major challenges to be addressed on the roadmap of extreme ultraviolet (EUV) lithography. Technological advancements in EUV lithography result in the possibility to print increasingly fine and highly resolved structures on a silicon wafer; however, the presence of fine-scale defects, interspersed in the printable mask layout, may lead to defective wafer prints. Hence, the development of actinic methods for review of potential defect sites becomes paramount. Here, we report on a ptychographic algorithm that makes use of prior information about the object to be retrieved, generated by means of rigorous computations, to improve the detectability of defects whose dimensions are of the order of the wavelength. The comprehensive study demonstrates that the inclusion of prior information as a regularizer in the ptychographic optimization problem results in a higher reconstruction quality and an improved robustness to noise with respect to the standard ptychographic iterative engine (PIE). We show that the proposed method decreases the number of scan positions necessary to retrieve a high-quality image and relaxes requirements in terms of signal-to-noise ratio (SNR). The results are further compared with state-of-the-art total variation-based ptychographic imaging.
Actinic patterned mask inspection (APMI) is used to verify the quality of photomasks for EUV lithography by revealing eventual defects in the patterned mask layout. The current approach to APMI, based on conventional imaging, is expensive and challenging to scale to keep up with Moore’s law. Ptychography offers a promising alternative for actinic EUV mask inspection by mitigating the need for expensive optics and providing better scalability compared to direct imaging approaches. However, the adoption of this lensless imaging method in semiconductor fabs is hampered by throughput challenges, which are due to the slow, iterative phase retrieval process and to the time-intensive data collection. In this study, we explore and demonstrate a rapid APMI method by exploiting a deep neural network (DNN) architecture which makes use of the extensive prior information available for photomask samples. Our aim is to achieve high-fidelity image reconstruction and identify defects in a photomask sample by processing only a small subset (less than 5% in this case) of the measured diffraction patterns using a network trained exclusively with synthetic data. We developed our DNN using both synthetic and experimental data, and finally, we tested the DNN with a completely synthetic dataset to ensure a clean split among training and test data and to prove that this approach can be used in a real situation with no external information on the mask defect content. Although the DNN was not able to accurately detect all the defects, we used the DNN prediction as a starting point for conventional ptychography and we demonstrated a significant improvement in reconstruction speed even with respect to the case where ptychography is initiated by an educated guess based on the prior knowledge of the mask layout. We conclude the paper by showing the outcome of a die-to-database inspection of a logic–like EUV mask pattern obtained with our approach.
The effect of conductor surface roughness on electro-thermally (ET) induced passive intermodulation (PIM) products is analysed and discussed. The analytical model combined with the commercial simulator SIMBEOR is used to examine the products of ET nonlinearity, which is significantly influenced by the surface topography of the conductor. It is further shown that, in spite of the rise of ohmic losses with frequency, conductor roughness may somewhat allay the ET-PIM growth due to concurrent increase of additional heat-sinking provided by the interiors of dendrites and conductor cladding.
12 July 2024 in Journal of Micro/Nanopatterning, Materials, and Metrology
BackgroundExtreme ultraviolet (EUV) attenuated phase-shifting masks are complex structures with stringent requirements for manufacturing precision and materials properties, and they have been object of extensive research lately.AimWe aim to characterize the optical constants (n and k) and the thickness of the layers in the mask stack with a nondestructive method.ApproachUsing a spectral reflectometry approach with EUV and soft X-ray illumination at various incidence angles, different layer’s properties in a photomask blank can be selectively probed. The optical constants and the thicknesses of the layers can be obtained by fitting a suitable model to the experimental reflectance.ResultsThe optical constants of the Pt-W alloy absorber and the thicknesses of the top three layers of the sample stack were accurately characterized.ConclusionsStacked layer’s properties can be selectively probed with the instrument (REGINE) we developed. The properties of the topmost layer can be characterized by assessing the probing depth, before investigating deeper layers with a suitable choice of illumination wavelength and angle of incidence.