Military communications networks can leverage much of the millimeter-wave (mm-wave) technology being investigated and developed for 5G cellular, but require special attention to the unique military requirements. This paper highlights the special communications requirements of specific military local area networks and discusses how higher band mm-wave technology can contribute to high data rates and simultaneously achieve covertness. Adaptive tuning for varying atmospheric absorption meets the military requirements for quickly adjusting covert communication zones to accommodate potentially rapid movements of network nodes, dynamic output power constraints, and changing environmental conditions.
5 January 2018 in IEEE Transactions on Microwave Theory and Techniques
The physical mechanism of the experimentally observed dependence of passive intermodulation (PIM) in printed circuits on conductor surface roughness is studied. It is shown that electrothermal (ET) nonlinearity, arising due to heating of imperfect conductors by high-power carriers in a multicarrier system, is correlated with conductor surface roughness and has a unique signature. Carriers modulate the conductor resistivity, skin depth, and surface impedance which generate PIM products. The detailed analysis demonstrates that ET-PIM depends on the conductor resistivity, shape, and roughness profile and also on the electric and thermal properties of the substrate. Their effects on PIM are illustrated by examples of uniform microstrip lines with different conductor and substrate materials, and periodically perturbed and meandered microstrip lines.
This paper explores the generation of passive intermodulation distortion products through the self heating of resistive elements in a microwave attenuator. A compact electrothermal resistor model requiring only two physical parameters is developed for platinum resistors and applied to a resistive attenuator pi network to predict electrothermal PIM. The electrothermal model is verified by comparing measured and predicted results when the attenuator is excited by a two tone signal at 400MHz with tone spacing from 1 to 100 Hz
18 April 2012 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
The degraded thermal path of 3-D integrated circuits (3DICs) makes thermal analysis at the chip-scale an essential part of the design process. Performing an appropriate thermal analysis on such circuits requires a model with junction-level fidelity; however, the computational burden imposed by such a model is tremendous. In this paper, we present enhancements to two thermal modeling techniques for integrated circuits to make them applicable to 3DICs. First, we present a resistive mesh-based approach that improves on the fidelity of prior approaches by constructing a thermal model of the full structure of 3DICs, including the interconnect. Second, we introduce a method for dividing the thermal response caused by a heat load into a high fidelity “near response” and a lower fidelity “far response” in order to implement Power Blurring high definition (HD), a hierarchical thermal simulation approach based on Power Blurring that incorporates the resistive mesh-based models and allows for junction-level accuracy at the full-chip scale. The Power Blurring HD technique yields approximately three orders of magnitude of improvement in memory usage and up to six orders of magnitude of improvement in runtime for a three-tier synthetic aperture radar circuit, as compared to using a full-chip junction-scale resistive mesh-based model. Finally, measurement results are presented showing that Power Blurring high definition (HD) accurately determines the shape of the thermal profile of the 3DIC surface after a correction factor is added to adjust for a discrepancy in the absolute temperature values.
1 March 1990 in IEEE Transactions on Circuits and Systems
Magnetic materials and components play a critical role in the technology we use in our daily lives. Many things, from electric motors to data storage, radar, and communication systems, rely on the properties of magnetic materials. The inherent physics of magnetic materials provides us with signal processing and control that either cannot be replicated or is difficult to replicate with electric-field-based devices alone.