Vacuum membrane distillation (VMD) is an attractive variant of the novel membrane distillation process, which is promising for various separations, including water desalination and bioethanol recovery through fermentation of agro-industrial by-products. This publication is part of an effort to develop a capillary membrane module for various applications, as well as a model that would facilitate VMD process design. Experiments were conducted in a laboratory pilot VMD unit, comprising polypropylene capillary-membrane modules. Performance data, collected at modest temperatures (37 °C to 65 °C) with deionized and brackish water, confirmed the improved system productivity with increasing feed-water temperature; excellent salt rejection was obtained. The recovery of ethanol from ethanol-water mixtures and from fermented winery by-products was also studied, in continuous, semi-continuous, and batch operating modes. At low-feed-solution temperature (27–47 °C), ethanol-solution was concentrated 4 to 6.5 times in continuous operation and 2 to 3 times in the semi-continuous mode. Taking advantage of the small property variation in the module axial-flow direction, a simple VMD process model was developed, satisfactorily describing the experimental data. This VMD model appears to be promising for practical applications, and warrants further R&D work.
1 February 2016 in Desalination and Water Treatment
The development of reliable criteria for determining the onset of scaling on desalination membranes is of high practical value. A novel approach to systematically investigate incipient membrane crystallization and scale-particle evolution was recently reported by this laboratory, involving modeling-relevant phenomena during membrane desalination and experiments, in well-controlled pressure cells operating in dead-end mode with no agitation. However, parallel studies have shown that flow conditions equivalent to those prevailing in real desalination membrane modules are obtained in pressure cells with agitation. Therefore, this work aims to employ the aforementioned approach to the more realistic case of membrane CaCO3 scaling in dead-end desalination with agitation. Detailed data regarding incipient CaCO3 scaling of desalination membranes were obtained, by analyzing scanning electron microscopy (SEM) images, for small bulk supersaturation ratios S = 1 to 4 and short filtration times (~30–90 min). Mean shear stresses at the membrane surface were similar to those prevailing in desalination modules. The data show that concentration polarization due to salt rejection strongly affects scale-particle growth rate, insignificantly influencing particle-number surface density. There is no evidence of a significant induction period in the nucleation and growth of scale-particles on the membrane surface. The initial CaCO3 deposit flux, in mg/(m2 min), exhibits a strong dependence on membrane surface supersaturation. Experimental data on the supersaturation-dependent scale evolution appear to significantly differ from predictions based on classical concepts of heterogeneous nucleation and growth, thus indicating that non-conventional nucleation is the dominant mechanism of the membrane-scale development.
Complete valorization of various wastes and effluents, with significant organic content, remains a great challenge in the pursuit of a circular economy. The approach based on anaerobic fermentation, leading to valuable biogas production, has been broadly accepted and employed as an attractive processing scheme. However, despite notable research efforts, complete valorization of the digestates (involving recovery of nutrients/by-products and full recycling/reuse of treated water) requires additional work for sustainable process development. This study aims to make a contribution in this direction by demonstrating a systematic methodology for valorizing the liquid digestate. The proposed membrane-based processing scheme involves UF-membrane pretreatment of the liquid digestate (for sludge separation) and subsequent NF/RO membrane treatment for reuse/recycling of the permeate; the concentrate, enriched in “nutrients” (phosphate and ammonium compounds), can be utilized for soil fertilization, with further conditioning/processing. By performing targeted laboratory experiments and advanced simulations, the membrane-based process was developed to a relatively high technology-readiness level, including a pilot unit design/construction and preliminary testing with satisfactory results. Through pilot testing in industrial environment, further process development and optimization will be pursued, towards practical applications. The demonstrated methodology is also considered appropriate for systematic development of membrane-based processes to valorize/treat a variety of similar effluents.