Fused Deposition Modeling (FDM) is a type of additive manufacturing (AM) that has received significant interest from researchers and industries due to its flexibility in design, efficient use of materials, and affordable costs. In this paper, the main objective is to investigate the influences of...
15 September 2023 in Engineering and Technology Journal
An effort has been made to improve the formability of (1006) AISI steel alloy sheets in deep drawing of square-shaped parts with flat bases through hydroforming. To achieve this goal, the manufacturing process involved the use of a newly developed experimental setup for sheet hydroforming with a die, which was created by the researchers. The key design features of this setup aimed for simplicity and modularity, allowing for potential utilization with oil pressures of up to 100 MPa. The obtained results were compared with those of conventional deep drawing. Both processes were examined under specific conditions to form identical cups up to the full depth of the provided die. Indicators of formability considered for comparison included the minimum possible corner radius, the maximum achievable depth without failure, and the maximum percentage of thinning at the corners. This study demonstrates that hydroforming can enhance the formability of low-carbon steel alloy sheets by improving the flow of metal into the die cavity and reducing thinning at critical regions, when compared to conventional deep drawing processes. In conventional deep drawing, only 70% of the full depth could be achieved before failure due to high local deformations resulting in significantly higher thinning at the corners.
19 December 2025 in Advances in Science and Technology
The structural response of materials under dynamic impact loads is crucial in protective design, particularly in applications where energy absorption is a primary concern. This study presents a comprehensive experimental investigation into the energy storage potential of additively manufactured polymeric axial members subjected to high-speed and low-speed impact tests. These axial members were fabricated using additive manufacturing techniques, emphasizing optimizing their structural performance under deformation. The study focuses on assessing the performance of various internal infill geometries to enhance energy dissipation during impact loading. A series of tests was conducted to evaluate the members' capacity to absorb impact energy and to compare their performance under varied strain rates. The findings indicate that specific infill patterns significantly improve energy absorption capabilities, making them suitable for applications involving blast and impact-resistant designs. Furthermore, the results demonstrate that careful optimization of the internal structure of 3D-printed elements can effectively reduce the adverse effects of dynamic loads, making them a promising option for protective structures. The findings contribute to a broader understanding of material behavior at high strain rates, provide valuable guidance for designing lightweight, impact-resistant components, and provide new perspectives on utilizing innovative materials and manufacturing techniques to enhance structural resilience in demanding environments.
17 February 2025 in Management Systems in Production Engineering
To increase the process stability and improve the product quality in the sheet hydroforming with die process, it is crucial for identifying and analyzing the dependence of forming pressure on process parameters. The effects of process parameters (blank holder force, frictional condition) on the forming fluid pressure were thoroughly studied experimentally. The main objective is to establish a relationship between the forming fluid pressure and several factors such as blank holder force and friction between die and sheet. The results demonstrate that the maximum fluid pressure increases with increasing blank holder force and friction. Finally, this relationship aims to support calculations and design data and provide control during the SHF-D process.
28 February 2026 in Revue des composites et des matériaux avancés