Predicting and controlling a droplet’s behavior on surfaces is very complex due to several factors affecting its nature. These factors play a crucial role in colloidal material deposition and related solution-based manufacturing methods like printing. A better understanding of the processes governing the droplet in the picoliter regime is needed to help develop novel thin-film manufacturing methods and improve the current ones. This study introduces the substrate temperature as a method to control the droplet’s behavior during inkjet printing, especially the coffee-ring phenomena, at an unprecedented temperature range (25–250 °C). To explain the particular behavior of the droplet, this research associates the creation of specific coffee-ring micro/nanostructures at elevated temperatures with the Leidenfrost effect that is responsible for creating a vapor pocket under the drying drop. Herein, we combine experimental data and numerical methods to explain the drying dynamic of the picoliter-size droplet on the substrate at elevated temperatures. The achieved results indicate that the coffee-ring effect is correlated with the heat transfer changes caused by the Leidenfrost effect and can be controlled and used to produce micro/nanostructured thin-films without additional processing steps.
30 December 2019 in IEEE Transactions on Instrumentation and Measurement
This paper investigates the potential output power of a photovoltaic (PV) installation on top of battery-powered electric vehicles (BEVs) and hybrid electric vehicles (HEVs). Firstly, we discuss the available area on the roof of BEVs and HEVs for deploying PV cells. Secondly, we verify the impact of the vehicles curved roof surface on the available output power of photovoltaics. More precisely, we present a method of calculating the effective area of PV cells, useful for PV simulation models and calculating the available output power of PV cells with different longitudinal angles. We verify our method within experiments and present the results of them, showing that the model predicts the output power of PV cells with an accuracy better than 2.5%. Furthermore, we discuss the impact of the curved surface and ambient conditions on possible interconnections of PV cells. Here, we present considerations for both, stationary and moving conditions, to highlight the difficulties for interconnecting PV cells to form PV panels. From our experimental results, for frequent changes in the available solar radiation level, we can see a difference in terms of output power larger than 75% between series and parallel interconnections of PV cells.
Conformable electrodes are essential for the development of flexible electronics or functional clothing, regardless of their application. Their reliable ability to transfer electric signals or serve as sensing elements in various conditions is vital for the advancement of wearables that will enhance our everyday life. In this research, we concentrate our efforts on the understanding of the influence of elongation and washing on roll-to-roll printed conductive electrodes of various shapes and materials. A large sample set provides data on the breaking mechanisms and how these affect the electrical properties of the electrodes. In addition, the physicochemical analysis offers insights into the electrodes’ and materials’ behavior in extreme conditions during elongation and washing cycles. The achieved results indicate auspicious nanoparticle shapes and sizes as well as evidence regarding micro-scale breaking mechanisms responsible for electrodes degradation. Utilization of commercially available materials and roll-to-roll printing techniques allow the seamless application of achieved results and the creation of more reliable, flexible electronic devices.
Multi-band terahertz (THz) absorber based on a non-symmetric double-sided graphene comb resonator array is designed and simulated by the finite element method (FEM) in CST Software. Then, an equivalent circuit model (ECM) based on admittance with a fast MATLAB code is proposed to analyze the absorber in the THz region. The admittance-based ECM approach could be used for any metamaterial absorber containing one layer of resonators sandwiched between two dielectric slabs and backed by a metal layer consisting of a layer of resonators with a thickness much smaller than the minimum wavelength in the considered wavelength range. The proposed absorber is dynamically tunable with a one-layered resonator array. It has strong linear dichroism (LD) response of 98% and the frequency range of 0.7-5 THz with absorption > 96%: two absorption bands for TE mode and three for TM mode. The proposed absorber can be used in polarization-sensitive devices and systems in the THz region. The ECM model of the metastructure was derived to provide an efficient approach to analyzing the performance of the absorber. The FEM simulation results are in good agreement with the ECM ones.
The equivalent circuit model (ECM) is developed by using a MATLAB code to analyze graphene-based multi-band chiral metamaterial absorbers composing graphene-based square split-ring resonator arrays in the terahertz (THz) range. The absorbers are simulated numerically by the finite element method (FEM) in CST Software to verify the ECM results. Our introduced multi-band absorbers can be used as suitable platforms in polarization-sensitive devices and systems in the THz range. We have designed four tunable graphene-based chiral metamaterial absorbers containing one, two, three, and four gaps in their arms, respectively. The absorber with one gap has four absorption bands (two for TE and three for TM, one band of both modes approximately overlaps) with absorption >50%. The absorber with two gaps has three absorption bands (two for TE and two for TM, one band of both modes approximately overlaps). The absorber with three gaps has four absorption bands (three for TE and two for TM, one band of both modes approximately overlaps). The absorber with four gaps has three absorption bands (three for TE and two for TM, two bands of both modes approximately overlap). They work in the 1-5.5 THz with maximum linear dichroism (LD) responses of 98, 99, 89, and 77%, respectively. The designed absorbers are dynamically tunable. Additionally, by a 90° rotation of the incident electromagnetic fields, it is possible to switch between the number and/or location of absorption bands making these absorbers a promising candidate for future THz systems. ECM results are following the FEM ones. The proposed ECM procedure is a simple and fast way to recognize the characteristics of the designed absorbers. Our proposed absorbers could be promising enablers in future THz systems.
15 July 2015 in IEEE Transactions on Device and Materials Reliability
The effect of the substrate on the cyclic bending reliability of screen printed silver traces is studied in this paper. The silver screen printed test samples in this study were three different plastic films and three varieties of paper sheets. The specimens with line widths of 250, 500, 1000, and 2000 μm were subjected to cyclic bending, and their electrical behavior was monitored with dc resistance measurements in situ. In this study, a 20% increase in resistance was defined as the failure criterion, and the reliability of each test population was assessed by a statistical Weibull analysis. The results showed that the reliability of the traces was highly dependent on the substrate thickness in all the studied materials. The traces on a 125-μm-thick polyethylene terephthalate substrate were found to have the lowest characteristic lifetimes of about 1000 bending cycles, whereas the traces with the same geometry on polyethylene terephthalate with a thickness of 50 μm endured hundreds of thousands of bending cycles. Similarly, decreasing the substrate thickness improved the reliability of the printed traces on paper substrates. This relationship was due to the reduced mechanical strain on the trace surface when using thinner substrates.