Somayyeh Asgari

Ms. Somayyeh Asgari

University of Oulu, Oulu, Finland
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 March 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SASomayyeh Asgari
Somayyeh Asgari
TFTapio Fabritius
Tapio Fabritius
A multi-band anisotropic metamaterial absorber operating in the terahertz (THz) range is constructed using a graphene-based split square ring resonator array featuring two gaps and a connecting bar. The design is meticulously simulated through the finite element method (FEM) using CST Software. Subsequently, an equivalent circuit model (ECM) is introduced, leveraging impedance and transmission lines, and implemented with a rapid MATLAB code to evaluate the absorber’s behavior in the THz spectrum. The proposed absorber, dynamically adjustable through a one-layered resonator array, exhibits a strong linear dichroism response of 99% within a frequency range of 0.3–4 THz. The metamaterial has an absorption rate of 81% for one absorption band in transverse magnetic mode and its three absorption bands in transverse electric mode have an average of 99.3% in each absorption band with absorption over 99%. This absorber holds potential applications in polarization-sensitive devices and THz systems. The ECM model was established to provide an efficient analytical tool for assessing the absorber’s performance, and the FEM simulation results align well with those derived from the ECM.

10 April 2023 in IEEE Access
Verified
Journal Article
Open access
SASomayyeh Asgari
Somayyeh Asgari
TFTapio Fabritius
Tapio Fabritius
Multi-band terahertz (THz) absorber based on a non-symmetric double-sided graphene comb resonator array is designed and simulated by the finite element method (FEM) in CST Software. Then, an equivalent circuit model (ECM) based on admittance with a fast MATLAB code is proposed to analyze the absorber in the THz region. The admittance-based ECM approach could be used for any metamaterial absorber containing one layer of resonators sandwiched between two dielectric slabs and backed by a metal layer consisting of a layer of resonators with a thickness much smaller than the minimum wavelength in the considered wavelength range. The proposed absorber is dynamically tunable with a one-layered resonator array. It has strong linear dichroism (LD) response of 98% and the frequency range of 0.7-5 THz with absorption > 96%: two absorption bands for TE mode and three for TM mode. The proposed absorber can be used in polarization-sensitive devices and systems in the THz region. The ECM model of the metastructure was derived to provide an efficient approach to analyzing the performance of the absorber. The FEM simulation results are in good agreement with the ECM ones.

15 June 2022 in IEEE Access
Verified
Journal Article
Open access
SASomayyeh Asgari
Somayyeh Asgari
TFTapio Fabritius
Tapio Fabritius
The equivalent circuit model (ECM) is developed by using a MATLAB code to analyze graphene-based multi-band chiral metamaterial absorbers composing graphene-based square split-ring resonator arrays in the terahertz (THz) range. The absorbers are simulated numerically by the finite element method (FEM) in CST Software to verify the ECM results. Our introduced multi-band absorbers can be used as suitable platforms in polarization-sensitive devices and systems in the THz range. We have designed four tunable graphene-based chiral metamaterial absorbers containing one, two, three, and four gaps in their arms, respectively. The absorber with one gap has four absorption bands (two for TE and three for TM, one band of both modes approximately overlaps) with absorption >50%. The absorber with two gaps has three absorption bands (two for TE and two for TM, one band of both modes approximately overlaps). The absorber with three gaps has four absorption bands (three for TE and two for TM, one band of both modes approximately overlaps). The absorber with four gaps has three absorption bands (three for TE and two for TM, two bands of both modes approximately overlap). They work in the 1-5.5 THz with maximum linear dichroism (LD) responses of 98, 99, 89, and 77%, respectively. The designed absorbers are dynamically tunable. Additionally, by a 90° rotation of the incident electromagnetic fields, it is possible to switch between the number and/or location of absorption bands making these absorbers a promising candidate for future THz systems. ECM results are following the FEM ones. The proposed ECM procedure is a simple and fast way to recognize the characteristics of the designed absorbers. Our proposed absorbers could be promising enablers in future THz systems.

10 February 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SASomayyeh Asgari
Somayyeh Asgari
TFTapio Fabritius
Tapio Fabritius
In this study, a tunable graphene plasmonic filter and a two-channel demultiplexer are proposed, simulated, and analyzed in the mid-infrared (MIR) region. We discuss the optical transmission spectra of the proposed cross-shaped resonator and the two-channel demultiplexer. The transmission spectra of the proposed MIR resonator are tunable by change of its dimensional parameters and the Fermi energy of the graphene. Our proposed structures have a single mode in the wavelength range of 5–12 µm. The minimum full width at half maximum (FWHM) and the maximum transmission ratio of the proposed resonator respectively reached 220 nm and 55%. Simulations are performed by use of three-dimensional finite-difference time-domain (3D-FDTD) method. Coupled mode theory (CMT) is used to investigate the structure theoretically. The numerical and the theoretical results are in good agreement. The performance of the proposed two-channel demultiplexer is investigated based on its crosstalk. The minimum value of crosstalk reaches −48.30 dB. Our proposed structures are capable of providing sub-wavelength confinement of light waves, useful in applications in MIR region.

5 February 2024 in Optics Continuum
Verified
Journal Article
Open access
SASomayyeh Asgari
Somayyeh Asgari
TFTapio Fabritius
Tapio Fabritius
An equivalent circuit model (ECM) to analyze a single-layered graphene multi-band metamaterial absorber was developed. This absorber consists of concentric square patch and ring resonator arrays and operates in the terahertz (THz) region. To validate our analysis based on the ECM, we also conducted numerical simulations using the finite element method (FEM) within CST software. Additionally, we have explained the absorption behavior of the metamaterial using the coupled mode theory (CMT). This absorber design, with its single-layer structure, tunability, and triple absorption bands, offers promise for applications in THz devices and systems. Notably, it achieves an average absorption of 99% for three bands and the absorption reaches 100% in the frequency range of 4 to 6.5 THz. The correlation of ECM and CMT analyses with the FEM simulations validate the accuracy and the effectiveness of these simplified approaches in comprehending the resonant characteristics of the metamaterial absorber.

13 December 2021 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SASomayyeh Asgari
Somayyeh Asgari
TFTapio Fabritius
Tapio Fabritius
An equivalent circuit model (ECM) using a MATLAB code to analyze a tunable two-layered graphene-based chiral dual-function metamirror, is proposed in this work. The investigated metastructure is composed of complementary U-shaped graphene resonator arrays in the terahertz (THz) region. The ECM analysis could be used for any two-layered chiral metastructure for any frequencies, containing resonators with a thickness less than λ/50. The characteristics of the proposed tunable metamirror were analyzed numerically using the finite element method (FEM) in CST Software to verify the ECM analysis. The proposed metamirror can be used in polarization-sensitive devices in the THz region with simpler biasing without a need for ion gels or similar. It works as a broadband TE and multiband (four bands) TM mirror in the 0.3–4.5 THz bandwidth with a strong linear dichroism (LD) response (up to 96%). The designed mirror is a dynamically tunable, dual-functional structure, requiring only 90° rotation of the incident electromagnetic fields to switch between broadband and multiband spectral behavior making it a promising candidate for future THz intelligent systems. The proposed ECM is in agreement with the FEM results. The ECM analysis provides a simple, fast, and effective way to understand the metamirror’s behavior and guides for the design and analysis of graphene-based chiral metastructures in the THz region.