FPGAs are well suited for prototyping complex digital systems for industrial and research purposes, as well as for the practical application of artificial intelligence (AI) methods in industrial autonomous control, automotives and space. FPGAs serve as platforms for inferring based on AI algorithms. In recent years, an increase in FPGA system applications with respect to advanced computing functions for physical and chemical research in space has been observed. Research on the reliability of applications operating in the above-mentioned areas exposed to radiation is of particular importance. Testing applications implemented on FPGAs requires the development of new methods that differ significantly from those intended for Application-Specific Integrated Circuits (ASICs). The FPGA logic is realized by SRAM-Based Look-Up Tables (LUTs). SRAM is relatively susceptible to single-event upsets (SEUs) generated by cosmic radiation. The existing fault injection (FI) tools do not model the faults generated by SEUs in SRAM-based FPGAs precisely enough. New FI tools are crucial for evaluating newly developed FPGA-specific tests. Thus, we developed a new tool that uses an accurate SEU model in LUTs. This new tool is written in Perl, and its tasks are to inject faults into the structural VHDL description and to control the CADENCE simulator. The novelty of this solution is that the tool models SEUs by modifying the logical functions generated by the LUTs. Furthermore, in this way, stuck-at faults at the LUT inputs and outputs can also be modeled. This method involves modifying the “INIT” parameters in the structural VHDL. Our tool was evaluated using several test programs, and a high fault coverage (FC) of 94.76% was achieved. This tool can be used to examine any LUT-based FPGA technology regardless of its implementation age. Moreover, during our research, a new mechanism of generating so-called logical redundancies caused by the injection of single faults in LUTs was discovered. This is a side effect of FI in LUTs, which makes it impossible to achieve 100% fault coverage of applications implemented on FPGAs. The mechanism of this phenomenon does not occur when injecting traditional stuck-at faults.
11 December 2025 in Herald of Khmelnytskyi National University. Technical sciences
The article presents the application of an object-oriented methodology for testbench development using SystemVerilog. This approach extends the capabilities of Verilog with complex data types, including classes and principles of object-oriented programming (OOP). The structural and object-oriented approaches are compared in the article. The advantages of OOP are highlighted in the context of code reuse, scalability, and clarity of testbench architecture. The structured verification environment is presented. It is based on transaction-level modeling and incorporates a set of modules (driver, monitor, scoreboard). This methodology allows designers to clearly separate the tasks between different levels and improve maintainability and code reuse. The practical application of object-oriented approach to testbench design is demonstrated on the UART communication protocol. The developed verification environment supports both transmission and receiving paths (TX and RX), and provides mechanisms for transaction generation, data monitoring and automated result checking. The use of virtual interfaces, mailboxes, and dynamically parameterized transactions ensures that the environment can be easily adapted to different DUT configurations and extended with new functionality. The effectiveness of the proposed approach is validated by implementing and simulating a testbench in a iSIM simulation environment of Xilinx Vivado 2020.2 software package. The obtained results demonstrate the benefits of object-oriented principles in terms of code reusability, modularity and readability that make this approach well-suitable for big and complex verification tasks. The development of parameterized modules (driver, monitor, control block) that will simplify the verification process of widely used serial interface controllers such as I2C, SPI, QSPI, LIN etc. will be the next step of the research.