Qin Chen

Dr. Qin Chen


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 July 2025
Verified
Journal Article
Open access
SZShaoliang Zhang
Shaoliang Zhang
QCQin Chen
Qin Chen
WGWeihua Gu
Weihua Gu
JBJianfeng Bai
Jianfeng Bai
In this study, the ability of Acidithiobacillus ferrooxidans to oxidize Fe2+ to Fe3+ and recover battery black powder was investigated, establishing a system for leaching decommissioned lithium iron phosphate battery black powder from A. ferrooxidans. Black powder reduced the consumption of reagents and subsequent pressure for treating iron-bearing minerals using the iron source in waste LiFePO4 batteries. This study used ultrasonic waves to remove impurities on the surface and cracks in battery black powder, hindering the dissolution layer and enhancing the leaching effect through a cavitation reaction and microbial activation to promote the leaching process. A filter bag experiment was designed using the selective permeability of filter bags to investigate whether the leaching mechanism of A. ferrooxidans lithium iron phosphate is contact or non-contact. Under optimal leaching conditions, the lithium leaching rate reached 99.7%, and the leaching time was reduced from 7 to 5 days, achieving efficient leaching of lithium. The filter bag experiment concluded that A. ferrooxidans leaching of lithium iron phosphate was mainly a contact leaching mechanism.

10 July 2023 in Processes
Verified
Journal Article
Open access
PDF file
YJYuxuan Jiang
Yuxuan Jiang
MZMin Zhao
Min Zhao
LZLitao Zhao
Litao Zhao
QCQin Chen
Qin Chen
QHQing Huang
Qing Huang
JWJingwei Wang
Jingwei Wang
Dismantling the waste printed circuit boards (WPCBs) of obsolete mobile phones is essential for resource recycling and environmental protection. An automated WPCB disassembly equipment based on the hot-vibration process was designed and applied, with optimized process conditions of a heating temperature of 250 °C and an equipment amplitude of >3.66 mm. The dismantling rate for electronic components and metal shields was 98%, but disassembly of components with underfill was less effective. Both simulation and actual measurement results of the equipment’s thermal field showed that the temperature inside the disassembly bin was uniform, with a maximum temperature difference of 6–8 °C. The area of the low-temperature region accounted for approximately 5% of the total area. The acceleration ranged from 2.11 to 8.28 g when using the disassembly force model. This equipment and process can be applied to disassemble large quantities of WPCBs.

16 January 2026 in Microorganisms
Verified
Journal Article
Open access
PDF file
ZCZixuan Chen
Zixuan Chen
JTJing Tang
Jing Tang
SPShengjuan Peng
Shengjuan Peng
QCQin Chen
Qin Chen
JBJianfeng Bai
Jianfeng Bai
WGWeihua Gu
Weihua Gu
Polyester fibers are extensively used in textiles, packaging, and industrial applications due to their durability and excellent mechanical properties. However, high-crystallinity polyester fibers represent a major challenge in plastic waste management due to their resistance to biodegradation. This study evaluated the biodegradation potential of environmental Bacillus isolates, obtained from mold-contaminated black bean plastic bags, toward polyethylene terephthalate (PET) and industrial-grade polyester fibers under mesophilic conditions. Among thirteen isolates, five (Bacillus altitudinis N5, Bacillus subtilis N6, and others) exhibited measurable degradation within 30 days, with mass losses up to 5–6% and corresponding rate constants of 0.04–0.05 day−1. A combination of complementary characterization techniques, including mass loss analysis, scanning electron microscopy (SEM), gel permeation chromatography (GPC), and gas chromatography/mass spectrometry (GC/MS), together with Fourier-transform infrared spectroscopy (FTIR), thermogravimetric/differential scanning calorimetry (TGA/DSC), and water contact angle (WCA) analysis, was employed to evaluate the biodegradation behavior of polyester fibers. Cross-analysis of mass loss, surface morphology, molecular weight reduction, and degradation products suggests a surface erosion-dominated degradation process, accompanied by ester-bond hydrolysis and preferential degradation of amorphous regions. FTIR, TGA/DSC, and WCA analyses further reflected chemical, thermal, and surface property changes induced by biodegradation rather than directly defining the degradation mechanism. The findings highlight the capacity of mesophilic Bacillus species to partially depolymerize polyester fibers under mild environmental conditions, providing strain resources and mechanistic insight for developing low-energy bioprocesses for polyester fiber waste management.

27 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
MZMin Zhao
Min Zhao
QCQin Chen
Qin Chen
MJMichael Johnson
Michael Johnson
AAAbhishek Kumar Awasthi
Abhishek Kumar Awasthi
QHQing Huang
Qing Huang
Dr. Abhishek Kumar AwasthiDr. Abhishek Kumar Awasthi
Dr. Abhishek Kumar Awasthi
The paper describes one promising method and approach for the recycling, reuse, and co-resource treatment of waste photovoltaic silicon and lithium battery anode graphite. Specifically, this work considers the preparation of nano/micron silicon carbide (SiC) from waste resources. Using activated carbon as a microwave susceptor over a very short timeframe, this research paper shows that nano/micron β-SiC can be successfully synthesized using microwave sintering technology. The used sintering temperature is significantly faster and more energy-efficient than traditional processes. The research results show that the β-SiC particle growth morphology greatly affected by the microwave sintering time. In a short microwave sintering time, the morphology of the β-SiC product is in the form of nano/micron clusters. The clusters tended to be regenerated into β-SiC nanorods after appropriately extending the microwave sintering time. In the context of heat conversion and resource saving, the comprehensive CO2 emission reduction is significantly higher than that of the traditional SiC production method.

5 June 2026 in ACS Omega
Verified
Journal Article
Open access
HSHengsi Sun
Hengsi Sun
HSHaikuo Shen
Haikuo Shen
WTWenyuan Tao
Wenyuan Tao
QZQidong Zhao
Qidong Zhao
QCQin Chen
Qin Chen
YXYonghou Xiao
Yonghou Xiao
The existing machine learning (ML) models exhibit insufficient predictive performance for CO2/CH4 separation on metal–organic frameworks (MOFs). Here, we leveraged a high-throughput screening strategy integrating molecular simulations with ML and successfully screened MOFs for CO2/CH4 adsorption separation with high performance. A novel four-layer ensemble ML was trained, and the structure-performance relationship was elucidated. Shapley Additive Explanations and Partial Dependence Plot revealed that the priority factors for CO2/CH4 separation were pore-limiting diameter, metal type, and accessible surface area. An optimal pore-limiting diameter of 3.7–4.2 Å was identified, and MOFs with helical channel topology structures were advantageous. Additionally, nitrogen-containing MOFs with above 30% oxygen synergistically enhance CO2 adsorption.

22 April 2025 in Research Square
Verified
Preprint
Open access
PDF file
SZShaoliang Zhang
Shaoliang Zhang
QCQin Chen
Qin Chen
WGWeihua Gu
Weihua Gu
JBJianfeng Bai
Jianfeng Bai
In this study, the ability of Acidithiobacillus ferrooxidans to oxidize Fe2+ to Fe3+ and recover battery black powder was investigated, establishing a system for leaching decommissioned lithium iron phosphate battery black powder from A. ferrooxidans. Black powder reduced the consumption of reagents and subsequent pressure for treating iron-bearing minerals using the iron source in waste LiFePO4 batteries. This study used ultrasonic waves to remove impurities on the surface and cracks in battery black powder, hindering the dissolution layer and enhancing the leaching effect through a cavitation reaction and microbial activation to promote the leaching process. A filter bag experiment was designed using the selective permeability of filter bags to investigate whether the leaching mechanism of A. ferrooxidans lithium iron phosphate is contact or non-contact. Under optimal leaching conditions, the lithium leaching rate reached 99.7%, and the leaching time was reduced from 7 to 5 d, achieving efficient leaching of lithium. The filter bag experiment concluded that A. ferrooxidans leaching of lithium iron phosphate was mainly a contact leaching mechanism.