Emerging contaminants such as per- and polyfluoroalkyl substances (PFASs) pose significant challenges for conventional wastewater treatment technologies. Non-thermal plasma (NTP) has gained attention as a promising advanced oxidation process capable of degrading persistent pollutants via hydrated electrons and reactive oxygen/nitrogen species under ambient conditions. This review summarizes recent progress in the application and scale-up of NTP for water treatment, with a focus on reactor configurations, degradation mechanisms, and energy efficiency. Key plasma reactor types—including dielectric barrier discharge, corona discharge, plasma jets, and gliding arc discharge—are evaluated for their suitability in large-scale applications. Pilot-scale studies addressing pharmaceuticals, dyes, and PFASs are reviewed to assess scalability, cost, and operational viability. Although NTP systems consistently achieve >80% contaminant removal, optimizing energy use and maintaining performance across complex water matrices remain critical challenges. Hybrid systems integrating NTP with ozonation, ultrafiltration, or cavitation show potential to improve treatment efficacy and reduce energy demands. Future research priorities include reactor design optimization, contaminant-specific plasma tuning, and technoeconomic analysis to support the translation of NTP technologies from lab-scale innovation to field-scale implementation.
Carbon dioxide (CO2) reduction to value-added chemicals for sustainable and clean energy is hindered by its considerable ionization potential (IP) and negative adiabatic electron affinity (EA), which makes CO2 a chemically inert molecule, leading to its challenging and unfavorable conversion under ambient conditions. To cope with this challenge, novel catalysts have been developed to lower the activation energy for CO2 conversion reactions. However, the low activity, selectivity, and deactivation of catalysts limit their industrial applications. This scenario demands the development of next-generation, highly active, selective, and long-term stable catalysts for CO2 conversion based on the reaction mechanism and microkinetics. This review summarizes and unifies the current catalyst design concepts for the thermochemical CO2 conversion to C1 products via heterogenous catalysis. In addition, recommendations are made to leverage thermal-catalysis knowledge to design plasma-activated catalysts. Four reactions were reviewed and analyzed for producing single-carbon (C1) organic products, including reverse water gas shift (RWGS) reaction, dry reforming of methane (DRM), CO2 methanation, and CO2 hydrogenation. Each section focuses on one reaction to elaborate on the reaction mechanism and current status for experimental and computational-based development of catalysts, including unsupported mono-metals, supported mono- and bimetallic catalysis, and transition carbide catalysts, depending on the reaction followed by the potential causes of catalyst deactivation. Finally, directions for future development are outlined with recommendations to translate the thermal catalysis concepts at a specific level for a rational catalyst design to catalyze CO2 conversion to C1 products under a non-thermal plasma (NTP) catalytic system.
This study explores nonthermal plasma reactions of methane and water in a two-phase system to produce methanol, examining reaction pathways, kinetics, and product distribution over time. The results show that methanol is the dominant liquid phase product among other oxygenates, including ethanol and acetic acid, with hydrogen as the largest fraction among gas-phase products comprising carbon monoxide, carbon dioxide, ethylene, and acetylene. Conductivity and pH trends of reactant water and their influence on reaction products were also analyzed. Methanol was found to be formed principally from the reactive coupling of methyl and hydroxyl radicals, as well as from methoxy and hydrogen radical combinations. Hydrogen was produced from three pathways: stepwise dehydrogenation of methane through electron-mediated hydrogen abstraction, sequential hydrogenation of ethane to acetylene, and water splitting. The methanol-yielding reactions proceeded at different rates in the liquid and gas phases, with gas-phase reactions occurring approximately nine times faster than the liquid-phase reactions. This work provides valuable insights into reaction pathways for direct methane conversion to oxygenates and value-added gas products under mild conditions using water as an environmentally friendly oxidant.
The scalable production of high-quality nanoparticles is a significant challenge for advancing nanotechnology applications. This research introduces a continuous-flow liquid-plasma discharge reactor for the synthesis of silver nanoparticles at room temperature and atmospheric pressure, utilizing D-xylose as a dual-function reducing and stabilizing agent. The reactor effectively generated uniform xylose-capped silver nanoparticles (X-Ag NPs). Optimal conditions were established utilizing argon gas at a 1:100 molar ratio of Ag precursor to D-xylose, resulting in spherical X-Ag NPs with an average size of 16.89 nm, a zeta potential of −38.87 mV, and a polydispersity index of 0.22. The formation and properties of X-Ag NPs were confirmed through characterization techniques including UV-Vis spectroscopy, dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS). The findings demonstrate that uniform particle nucleation and growth occurred due to the homogeneous distribution of high-energy electrons and reactive gas species produced in the plasma phase. This environmentally sustainable, continuous-flow method shows considerable promise for the industrial-scale production of biomass-derived silver nanoparticles.