In this study, the mechano-chemical properties of aromatic polymer polyetheretherketone (PEEK) samples, irradiated by high energy electrons at 200 and 400 kGy doses, were investigated by Nanoindentation, Brillouin light scattering spectroscopy and Fourier-transform infrared spectroscopy (FTIR). Irradiating electrons penetrated down to a 5 mm depth inside the polymer, as shown numerically by the monte CArlo SImulation of electroN trajectory in sOlids (CASINO) method. The irradiation of PEEK samples at 200 kGy caused the enhancement of surface roughness by almost threefold. However, an increase in the irradiation dose to 400 kGy led to a decrease in the surface roughness of the sample. Most likely, this was due to the processes of erosion and melting of the sample surface induced by high dosage irradiation. It was found that electron irradiation led to a decrease of the elastic constant C₁₁, as well as a slight decrease in the sample’s hardness, while the Young’s elastic modulus decrease was more noticeable. An intrinsic bulk property of PEEK is less radiation resistance than at its surface. The proportionality constant of Young’s modulus to indentation hardness for the pristine and irradiated samples were 0.039 and 0.038, respectively. In addition, a quasi-linear relationship between hardness and Young’s modulus was observed. The degradation of the polymer’s mechanical properties was attributed to electron irradiation-induced processes involving scission of macromolecular chains.

Thorium has emerged as a promising alternative to uranium in nuclear energy systems due to its higher natural abundance, favorable conversion to fissile ²³³U, and reduced generation of long-lived transuranic waste. This review provides a comprehensive overview of advanced techniques for thorium recovery from primary ores and secondary resources. The main mineralogical carriers—including monazite, thorianite, thorite, and cheralite as well as industrial by-products such as rare-earth processing tailings—are critically examined with respect to their occurrence and processing potential. Physical enrichment methods (gravity, magnetic, and electrostatic separation) and hydrometallurgical approaches (acidic and alkaline leaching) are analyzed in detail, highlighting their efficiencies, limitations, and environmental implications. Particular emphasis is placed on modern separation strategies such as solvent extraction with organophosphorus reagents, diglycolamides, and ionic liquids, as well as extraction chromatography, nanocomposite sorbents, ion-imprinted polymers, and electrosorption on carbon-based electrodes. These techniques demonstrate significant progress in enhancing selectivity, reducing reagent consumption, and enabling recovery from low-grade and secondary feedstocks. Environmental and radiological aspects, including waste minimization, immobilization, and regulatory frameworks, are discussed as integral components of sustainable thorium management. Finally, perspectives on hybrid technologies, digital process optimization, and economic feasibility are outlined, underscoring the need for interdisciplinary approaches that combine chemistry, materials science, and environmental engineering. Collectively, the analysis highlights the transition from conventional practices to integrated, scalable, and environmentally responsible technologies for thorium recovery.

Thorium occupies a unique position in the global energy agenda, being simultaneously considered a promising nuclear fuel and an ecological risk factor. Its fuel cycle (Th-232 → U-233) offers significant advantages over uranium, including reduced waste, improved resistance to burnup, and lower proliferation risks, while molten salt reactor designs demonstrate potential to reduce electricity costs and consume transuranic elements from spent nuclear fuel. At the same time, the geochemical mobility of Th⁴⁺ ions, prone to forming soluble and colloidal species, increases the likelihood of their migration into soils and waters, with subsequent accumulation in biota and induction of radiotoxic effects. This study applied a comprehensive review of thorium’s energy potential and environmental risks, analyzing advances in reactor technology alongside mitigation methods such as coagulation, membrane separation, ion exchange, and adsorption with natural and modified sorbents. The findings emphasize that thorium’s strategic role in sustainable nuclear power is inseparable from the development of reliable safeguards to protect ecosystems. We conclude that a dual approach—integrating innovative reactor engineering with effective environmental countermeasures—will be essential for safe deployment of thorium technologies, ensuring their contribution to clean energy generation while minimizing ecological impacts.

Small Modular Reactors (SMRs) are becoming one of the key trends in the development of nuclear technology, offering a flexible, safe and cost-effective alternative to large nuclear power plants. This review defines the “driving force” of SMRs as their ability to enhance safety, modular scalability, and fuel sustainability through innovative design and policy integration. It aims to provide a systematic assessment of technological trends, deployment strategies, and fuel innovations that underpin the future of nuclear energy. This article provides a comprehensive overview of the main classes of SMRs, categorised by fuel type and application, ranging from Low-Enriched Uranium (LEU) and High-Assay Low-Enriched Uranium (HALEU) reactors to thorium-232, metallic fuel and reprocessed nuclear materials. The key technical advantages of SMRs are discussed—passive safety systems, extended fuel cycles (longer operational periods before refuelling compared to conventional reactors), modular production and compactness—which make such reactors particularly suitable for use in hard-to-reach regions, military facilities, in space and as part of hybrid power systems. Special attention is paid to the prospects of advanced fuel cycles, including the conversion of thorium to uranium-233 and the reuse of actinides, which contributes to waste reduction and supports the realisation of a closed nuclear cycle. The current status of SMR projects around the world is also analysed, highlighting the most promising solutions and discussing regulatory, infrastructure readiness and geopolitical factors.

Small Modular Reactors (SMRs) are becoming one of the key trends in the development of nuclear technology, offering a flexible, safe and cost-effective alternative to large nuclear power plants. This article provides a comprehensive overview of the main classes of SMRs, categorised by fuel type and application, ranging from low enriched uranium (LEU) and HALEU reactors to thorium, metallic fuel and reprocessed nuclear materials. The key technical advantages of SMRs are discussed: passive safety systems, extended fuel cycles, modular production and compactness, which make such reactors particularly suitable for use in hard-to-reach regions, military facilities, in space and as part of hybrid power systems. Special attention is paid to the prospects of advanced fuel cycles, including the conversion of thorium to uranium-233 and the reuse of actinides, which contributes to waste reduction and brings closer the realisation of a closed nuclear cycle. The current status of SMR projects around the world is also analysed, highlighting the most promising solutions and discussing regulatory, infrastructure readiness and geopolitical factors. It concludes that SMRs are well positioned to play an important role in the future of low-carbon and decentralised energy due to their diversity and adaptability.

In this paper, we demonstrate a new, highly efficient method of crosslinking multilayer graphene, and create nanopores in it by its irradiation with low-energy argon cluster ions. Irradiation was performed by argon cluster ions with an acceleration energy E ≈ 30 keV, and total fluence of argon cluster ions ranging from 1 × 10⁹ to 1 × 10¹⁴ ions/cm². The results of the bombardment were observed by the direct examination of traces of argon-cluster penetration in multilayer graphene, using high-resolution transmission electron microscopy. Further image processing revealed an average pore diameter of approximately 3 nm, with the predominant size corresponding to 2 nm. We anticipate that a controlled cross-linking process in multilayer graphene can be achieved by appropriately varying irradiation energy, dose, and type of clusters. We believe that this method is very promising for modulating the properties of multilayer graphene, and opens new possibilities for creating three-dimensional nanomaterials.