The renewable biomass material obtained from rice husk, a low-cost agricultural waste, was used as a precursor to synthesize a highly porous graphene-based carbon as electrode material for supercapacitors. Activated graphene-based carbon (AGC) was obtained by a two-step chemical procedure and exhibited a very high specific surface area (SSA) of 3292 m² g⁻¹. The surface morphology of the synthesized materials was studied using scanning and transmission electron microscopy (SEM, TEM). Furthermore, the AGC was modified with nickel hydroxide Ni(OH)₂ through a simple chemical precipitation method. It was found that the most significant increase in capacitance could be reached with Ni(OH)₂ loadings of around 9 wt.%. The measured specific capacitance of the pure AGC supercapacitor electrodes was 236 F g⁻¹, whereas electrodes from the material modified with 9 wt.% Ni(OH)₂ showed a specific capacitance of up to 300 F g⁻¹ at a current density of 50 mA g⁻¹. The increase in specific capacitance achieved due to chemical modification was, therefore 27%.

Thorium has emerged as a promising alternative to uranium in nuclear energy systems due to its higher natural abundance, favorable conversion to fissile ²³³U, and reduced generation of long-lived transuranic waste. This review provides a comprehensive overview of advanced techniques for thorium recovery from primary ores and secondary resources. The main mineralogical carriers—including monazite, thorianite, thorite, and cheralite as well as industrial by-products such as rare-earth processing tailings—are critically examined with respect to their occurrence and processing potential. Physical enrichment methods (gravity, magnetic, and electrostatic separation) and hydrometallurgical approaches (acidic and alkaline leaching) are analyzed in detail, highlighting their efficiencies, limitations, and environmental implications. Particular emphasis is placed on modern separation strategies such as solvent extraction with organophosphorus reagents, diglycolamides, and ionic liquids, as well as extraction chromatography, nanocomposite sorbents, ion-imprinted polymers, and electrosorption on carbon-based electrodes. These techniques demonstrate significant progress in enhancing selectivity, reducing reagent consumption, and enabling recovery from low-grade and secondary feedstocks. Environmental and radiological aspects, including waste minimization, immobilization, and regulatory frameworks, are discussed as integral components of sustainable thorium management. Finally, perspectives on hybrid technologies, digital process optimization, and economic feasibility are outlined, underscoring the need for interdisciplinary approaches that combine chemistry, materials science, and environmental engineering. Collectively, the analysis highlights the transition from conventional practices to integrated, scalable, and environmentally responsible technologies for thorium recovery.

Carbon nanofibers based on lignin from wood waste have a promising potential for the ability to produce electrodes that can modernize existing energy storage technology. The most important detail is that the low cost, as well as the availability of the initial products for the production of lignin, will reduce the cost of energy storage devices and contribute to improving the environment. In this study, pine sawdust and elm sawdust were used as raw materials for the production of lignin, which accumulate in large quantities in metal workshops in Almaty. Lignin extraction was carried out using an organosolvent method, which is environmentally friendly, low-cost, uses minimal amounts of strong acids and metal catalysts, does not pollute water, and does not emit sulfur dioxide (SO₂). A comprehensive study of the characteristics of the obtained lignins from wood waste was carried out. Infrared spectroscopy (IR) revealed that the obtained lignin contains aromatic, phenolic, hydroxyl, methyl, and methoxyl groups. The results of nuclear magnetic resonance (NMR) spectroscopy showed the presence of a high number of syringyl (S) links compared to guaiacyl (G), which contribute to increased efficiency in the thermal processing of lignin. Also, this study investigated the use of the obtained lignins to produce continuous fibers by electrospinning. The effect of lignin mass on the viscosity of the lignin/polyacrylonitrile (PAN) solution and the effect of the carbonization temperature on the physico-chemical characteristics of the lignin/PAN solution were investigated. The following research methods were used for this purpose: Raman spectroscopy, thermogravimetric analysis (TGA), electron scanning microscopy, energy dispersion analysis, IR, NMR, and optical microscopy. The conditions for the production of lignin-containing carbon fibers at temperatures of 800, 900, and the carbonation heating rate, is an important parameter in the production of carbon fibers as it strongly affects the characteristics of the resulting carbon fibers. The heating rate affects were studied, and it was found that, at a heating rate of 5 °C/min and a carbonation temperature of 800 °C, porous carbon nanofibers with a diameter of 47 nm are formed in a nitrogen medium for 60 min.

Small Modular Reactors (SMRs) are becoming one of the key trends in the development of nuclear technology, offering a flexible, safe and cost-effective alternative to large nuclear power plants. This review defines the “driving force” of SMRs as their ability to enhance safety, modular scalability, and fuel sustainability through innovative design and policy integration. It aims to provide a systematic assessment of technological trends, deployment strategies, and fuel innovations that underpin the future of nuclear energy. This article provides a comprehensive overview of the main classes of SMRs, categorised by fuel type and application, ranging from Low-Enriched Uranium (LEU) and High-Assay Low-Enriched Uranium (HALEU) reactors to thorium-232, metallic fuel and reprocessed nuclear materials. The key technical advantages of SMRs are discussed—passive safety systems, extended fuel cycles (longer operational periods before refuelling compared to conventional reactors), modular production and compactness—which make such reactors particularly suitable for use in hard-to-reach regions, military facilities, in space and as part of hybrid power systems. Special attention is paid to the prospects of advanced fuel cycles, including the conversion of thorium to uranium-233 and the reuse of actinides, which contributes to waste reduction and supports the realisation of a closed nuclear cycle. The current status of SMR projects around the world is also analysed, highlighting the most promising solutions and discussing regulatory, infrastructure readiness and geopolitical factors.

Small Modular Reactors (SMRs) are becoming one of the key trends in the development of nuclear technology, offering a flexible, safe and cost-effective alternative to large nuclear power plants. This article provides a comprehensive overview of the main classes of SMRs, categorised by fuel type and application, ranging from low enriched uranium (LEU) and HALEU reactors to thorium, metallic fuel and reprocessed nuclear materials. The key technical advantages of SMRs are discussed: passive safety systems, extended fuel cycles, modular production and compactness, which make such reactors particularly suitable for use in hard-to-reach regions, military facilities, in space and as part of hybrid power systems. Special attention is paid to the prospects of advanced fuel cycles, including the conversion of thorium to uranium-233 and the reuse of actinides, which contributes to waste reduction and brings closer the realisation of a closed nuclear cycle. The current status of SMR projects around the world is also analysed, highlighting the most promising solutions and discussing regulatory, infrastructure readiness and geopolitical factors. It concludes that SMRs are well positioned to play an important role in the future of low-carbon and decentralised energy due to their diversity and adaptability.