Lithium niobate (LN) microdisk resonators on a LN-silica-LN chip were fabricated using only conventional semiconductor fabrication processes. The quality factor of the LN resonator with a 39.6-μm radius and a 0.5-μm thickness is up to 1.19 × 106, which doubles the record of the quality factor 4.84 × 105 of LN resonators produced by microfabrication methods allowing batch production. Electro-optic modulation with an effective resonance-frequency tuning rate of 3.0 GHz/V was demonstrated in the fabricated LN microdisk resonator.
2 December 2020 in Science China Physics, Mechanics & Astronomy
Lithium niobate on insulator (LNOI), regarded as an important candidate platform for optical integration due to its excellent nonlinear, electro-optic, and other physical properties, has become a research hotspot. A light source, as an essential component for an integrated optical system, is urgently needed. In this Letter, we reported the realization of 1550 nm band on-chip LNOI microlasers based on erbium-doped LNOI ring cavities with loaded quality factors higher than 1 million at , which were fabricated by using electron beam lithography and inductively coupled plasma reactive ion etching processes. These microlasers demonstrated a low pump threshold of and stable performance under the pump of a 980 nm band continuous laser. Comb-like laser spectra spanning from 1510 to 1580 nm were observed in a high pump power regime, which lays the foundation of the realization of pulsed laser and frequency combs on a rare-earth ion-doped LNOI platform. This Letter effectively promotes the development of on-chip integrated active LNOI devices.
Lithium niobate on insulator (LNOI), as an emerging and promising optical integration platform, faces shortages of on-chip active devices including lasers and amplifiers. Here, we report the fabrication of on-chip erbium-doped LNOI waveguide amplifiers based on electron beam lithography and inductively coupled plasma reactive ion etching. A net internal gain of ~30 dB/cm in the communication band was achieved in the fabricated waveguide amplifiers under the pump of a 974 nm continuous laser. This work develops new active devices on LNOI and may promote the development of LNOI integrated photonics.
We report the first observation, to the best of our knowledge, of sum-frequency generation in on-chip lithium niobate microdisk resonators. The sum-frequency signal in the 780 nm band, distinct in wavelength from second-harmonic signals, was obtained in lithium niobate microresonators under the pump of two individual 1550 nm band lasers. The sum-frequency conversion efficiency was measured to be . The dependence of the intensities of the nonlinear signals on the total pump power and the wavelength of one pump laser was investigated while fixing the wavelength of the other. This work paves the way for applications of on-chip lithium niobate microdisk resonators ranging from infrared single-photon detection to infrared spectroscopy.
Periodically poled lithium niobate (PPLN) structures on a chip enable efficient second-order nonlinear optical effects, benefiting from the tight light confinement and the utilization of d33. Here, we report a broadband second-harmonic (SH) generation in a step-chirped PPLN waveguide on X-cut lithium niobate on insulator (LNOI). The high fidelity of the poling period is demonstrated over the whole length of 7 mm using a non-destructive technique of piezoresponse force microscopy. The SH signal was continuously observed in the step-chirped PPLN waveguides while scanning the wavelength of the pump laser from 1550 nm to 1660 nm. The SH conversion efficiency was measured to be 9.6 % W-1 cm-2 at 1642 nm. This work will benefit wavelength conversions of light sources with wideband spectra.