Aluminum hydride (AlH3) is a promising candidate for enhancing the combustion performance of liquid fuels due to its high energy density and exceptional hydrogen storage capacity. This study investigated the ignition and combustion characteristics of μ-AlH3 particles in kerosene droplets using TG-DSC analysis, high-speed imaging, laser ignition, and combustion product characterization, with comparisons to micron- and nano-aluminum powders. Results showed that the exothermic combustion of hydrogen released from AlH3 decomposition lowered the primary oxidation temperature of aluminum, leading to more intense combustion with smaller ejected particles. The particle size of kerosene droplets containing AlH3 rapidly decreases due to the escape of hydrogen. The heat released by the combustion of hydrogen significantly accelerates the combustion of droplets, and the fastest combustion rate is observed at a concentration of 1% AlH3. The combustion products of kerosene droplets containing AlH3 are smaller than those of kerosene droplets containing aluminum, indicating that their combustion efficiency is higher. A combustion model for AlH3-based kerosene droplets was developed, demonstrating less than 10% error in predicting ignition delay and burning rates. These findings provide valuable insights for the application of AlH3 in liquid fuels.
This study investigated the aerodynamic structures generated by transverse jet injection in supersonic flows around high-speed vehicles. The unsteady evolution of these structures was analyzed using an improved delayed detached Eddy simulation (IDDES) approach based on the Reynolds stress model (RSM). The simulations successfully reproduced experimentally observed shock systems and vortical structures. The time-averaged flow characteristics were compared with the experimental results, and good agreement was observed. The flow characteristics were analyzed, with particular emphasis on the formation of counter-rotating vortex pairs in the downstream region, as well as complex near-field phenomena, such as flow separation and shock wave/boundary layer interactions. Time-resolved spectral analysis at multiple monitoring locations revealed the presence of a global oscillation within the flow dynamics. Within these regions, pressure fluctuations in the recirculation zone lead to periodic oscillations of the upstream bow shock. This dynamic interaction modulates the instability of the windward shear layer and generates large-scale vortex structures. As these shed vortices convect downstream, they interact with the barrel shock, triggering significant oscillatory motion. To further characterize this behavior, dynamic mode decomposition (DMD) was applied to the pressure fluctuations. The analysis confirmed the presence of a coherent global oscillation mode, which was found to simultaneously govern the periodic motions of both the upstream bow shock and the barrel shock.
As an active flow-control technology, the counterflowing jet can reduce drag by reconstructing the flow field structure during the re-entry of a vehicle, thereby mitigating the adverse effects of high overload on personnel. However, variations in the angle of attack (AoA) and nozzle mass flow rate tend to induce transitions in its flow field modes and fluctuations in drag reduction performance. To further investigate the aerodynamic interference characteristics of the counterflowing jet during the re-entry process, this study focused on a 2.6% subscale model of the Apollo return capsule. The Reynolds-averaged Navier–Stokes (RANS) equations turbulence model was employed to numerically analyze the effects of different mass flow rates and freestream AoAs on the flow field modes and the drag behavior. The results indicate that with an increase in AoA, the flow field structure of the long penetration mode (LPM) is likely to be destroyed, and the shock wave shape exhibits significant asymmetric distortion. In contrast, the flow field structure of the short penetration mode (SPM) remains relatively stable; however, the bow shock and Mach disk exhibit two typical offset patterns, whose offset characteristics are jointly regulated by the mass flow rate and AoA. In terms of drag characteristics, the AoA significantly weakens the drag reduction effect of the LPM. In contrast, the SPM can maintain a stable drag reduction efficiency of approximately 50% within a certain AoA range. Nevertheless, as the AoA further increases, the drag reduction effect of the SPM gradually diminishes.