A rectangular shape of asymmetric dielectric resonator antenna (DRA) excited by a coaxial probe is proposed and investigated. The asymmetric DRA geometry can offer an impedance bandwidth up to 51% for |S11| < −10 dB from 4.1 to 6.7 GHz. The antenna covers most of the wireless systems like 5.2, 5.5, and 5.8 GHz WLAN/Wi-MAX applications. The experimentally measured result shows that the efficiency is above 90% for the bandwidth of operation. The simulated and measured radiation patterns are consistent throughout the operational bandwidth. The measured peak gain over the band is 8.2 dBi. It is also observed that the newly proposed configuration reduces the DRA volume by 26% as compared to conventional rectangular DRA, with compact volume of 8.24 cm3. Good match between the measured and simulated results has been obtained.
1 January 2015 in International Journal of Applied Electromagnetics and Mechanics
In this paper, a theoretical and practical investigation on microwave dielectric materials for wideband dielectric resonator antennas(DRAs) is presented. Due to the variety of materials available to antenna designers, a proper technique to select the best possible material is required. In this paper Ashby's material selection methodology is used for dielectric material based antenna systems. Four primary performance indices, impedance bandwidth (BW), the size of the antenna (λ), radiation efficiency (η) and resonance frequency( f_{0} ), are used to obtain the desired performance. The selection chart shows that Roger TMM10, (ε _{r} = 9.8) is the most suitable material followed by "Roger's TMM10i and RO3010" for DRAs to provide the best performance for wideband applications. Performances of antenna are verified with rectangular and hybrid design of DRA in terms of reflection coefficients, radiation pattern, gain and efficiency. Theoretical work is compared with the simulation and the close agreement between the two, confirm the validity of this study.
This paper presents the feasibility of biodegradable Polylactic Acid (PLA) for the creation of 3D structure as a radiator. Biodegradable PLA is a special type of polymer having a dielectric constant ( ) of 3.45 with loss tangent (tan δ) of 0.05 which is made from renewable resources instead of non-renewable petroleum-based resources. Three conventional Dielectric Resonator Antennas (DRAs), i.e. Cylindrical DR Antenna (CDRA), Rectangular DR Antenna (RDRA), and Triangular DR Antenna (TDRA) with supporting pillars have been developed and investigated for broadband applications. These three different structures are used to validate the features of PLA for antenna applications. Proposed antennas cover wide impedance bandwidth of 74.54%, 71.36%, and 69.05% (|S11| < −10 dB) for CDRA, RDRA, and TDRA, respectively. Measured results are correlated with simulations. The average peak gain of proposed antennas is more than 4 dBi within operating band. The fabricated antenna possesses compact size with light-weight and cost-effective feature. Thus, proposed antennas can use for a variety of wireless applications such as weather monitoring, air traffic control, scanning & discrimination, mobile service, radio navigation, and many other applications of C-band, X-band, and Ku-band.
1 September 2017 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications