Jiahao Wu

Dr. Jiahao Wu

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 August 2021 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
CPChengliang Pan
Chengliang Pan
AFAnhui Feng
Anhui Feng
CSChao Shi
Chao Shi
MHMingang Hu
Mingang Hu
JWJiahao Wu
Jiahao Wu
HXHaojie Xia
Haojie Xia
Piezoelectric impact motor (PIM) with high power driving capability has attracted extensive attention. This paper presents a new resonant-type PIM based on inertial drive mechanism. Architecture construction, dynamic modeling, and prototype experiment of the proposed motor are conducted. With sinusoidal driving voltages of 24 V p-p at 435 Hz and 18 V p-p at 870 Hz in the resonant mode, the prototype motor achieves an average no-load velocity of 26.1 mm s −1 , a stalling drag force of 350 mN, and a power output capacity of 2.55 mW, while it also provides a stable step displacement of 0.67 μ m with saw-tooth wave driving voltage of 20 V p-p , 10 Hz in the stepping mode. Experiment results are consistent with the theoretical analysis, which confirms an effective approach to guide the structure design and further optimization for resonant-type PIMs.

24 July 2023 in IEEE Transactions on Automatic Control
Verified
Journal Article
Closed access
JWJiahao Wu
Jiahao Wu
JZJingyuan Zhan
Jingyuan Zhan
LZLiGuo Zhang
LiGuo Zhang
This paper studies the problem of adaptive boundary observer design for a class of linear hyperbolic PDEs subject to in-domain and boundary parameter uncertainties. Based on the swapping transformation technique, a Luenberger-type boundary observer with the least squares parameter estimation law is designed, which relies only on the measurements at boundaries of the system. By employing the Lyapunov function method, we prove that the exponential convergence of the proposed boundary observer design scheme is guaranteed when the observer gains satisfy a set of matrix inequality conditions. Finally, we illustrate the effectiveness of the adaptive estimation scheme by applying it to the linearized Aw-Rascle-Zhang (ARZ) traffic flow model involving the in-domain relaxation time and boundary flux fluctuation uncertainties.

1 September 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Xiaoqing ZhuXiaoqing Zhu
Xiaoqing Zhu
LBLanyue Bi
Lanyue Bi
TWTong Wu
Tong Wu
CZChuan Zhang
Chuan Zhang
JWJiahao Wu
Jiahao Wu
Deep Reinforcement Learning (DRL) has achieved remarkable success in robotic control, autonomous driving, and game-playing agents. However, its decision-making process often remains a black box, lacking both interpretability and verifiability. In robotic control tasks, developers cannot pinpoint decision errors or precisely adjust control strategies based solely on observed robot behaviors. To address this challenge, this work proposes an interpretable DRL framework based on a Causal Correction and Compensation Network (C2-Net), which systematically captures the causal relationships underlying decision-making and enhances policy robustness. C2-Net integrates a Graph Neural Network-based Neural Causal Model (GNN-NCM) to compute causal influence weights for each action. These weights are then dynamically applied to correct and compensate the raw policy outputs, thereby balancing performance optimization and transparency. This work validates the approach on OpenAI Gym’s Hopper, Walker2d, and Humanoid environments, as well as the multi-agent AzureLoong platform built on Isaac Gym. In terms of convergence speed, final return, and policy robustness, experimental results show that C2-Net achieves higher performance over both non-causal baselines and conventional attention-based models. Moreover, it provides rich causal explanations for its decisions. The framework represents a principled shift from correlation to causation and offers a practical solution for the safe and reliable deployment of multi-robot systems.

13 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
TWTong Wu
Tong Wu
LDLinlong Ding
Linlong Ding
YCYingchun Chen
Yingchun Chen
JYJie Yang
Jie Yang
RNRenjie Nie
Renjie Nie
JWJiahao Wu
Jiahao Wu
During the operation of steel cable-driven radiation-resistant robots in nuclear industrial environments, the tensile force of a steel cable is influenced by temperature variations, which can cause significant detection errors. To address this problem, this study proposes a temperature-compensated axial force characterization method for steel cables based on the magnetoelastic effect, aiming to ensure the measurement accuracy of magnetoelastic sensors. The principle of the magnetoelastic measurement method involves magnetizing the steel cable. When subjected to tensile forces, the magnetization characteristics of the steel cable change, thereby altering the detection signal of the magnetoelastic sensor. By analyzing the relationship between steel cable tension and variations in the detection signal, effective force measurement can be achieved. First, experiments are conducted to investigate the influence of temperature on the detection signals of a magnetoelastic sensor under zero-load conditions. Then, additional tests are performed to examine the combined effects of a tensile force and temperature on the sensor’s signals. Finally, based on the experimental data, axial force prediction models are constructed using both surface fitting and a backpropagation neural network (BPNN). The results demonstrate that, compared to the resistance values, inductance exhibits superior stability under temperature variations. In the temperature range of 20–50 °C, the inductance variation is approximately 0.15 μH, which indicates improved suitability for characterizing the axial force of steel cables. It is also shown that under isothermal conditions, the inductance increases linearly with the applied tensile force, exhibiting a slope of approximately 0.025 μH/kN. Both the surface fitting-based and BPNN-based axial force prediction models demonstrate high accuracy, with absolute prediction errors consistently below 5% compared to actual data.

21 October 2021
Verified
Conference Paper
Closed access
CPChengliang Pan
Chengliang Pan
AFAnhui Feng
Anhui Feng
JWJiahao Wu
Jiahao Wu
MHMingang Hu
Mingang Hu
CSChao Shi
Chao Shi
HXHaojie Xia
Haojie Xia
Resonant-type piezoelectric impact motors (PIMs) use their inherent vibration modes to synthesize periodic sawtooth wave vibrations, which makes up for the low power output defect of traditional PIMs working in the quasi-static state. In the experiments of prototype motors, their transient motions in the resonant state are affected by many factors, which make unstable influence on the analysis of the performances. In this paper, a novel PIM based on resonant-type impact driving mechanism is proposed. By fitting the transient motion curves of the prototype motor, the actual parameters of the prototype are extracted. The modified characteristic of the prototype motor appears a good agreement with the theoretical prediction.