The aim of this study is to purify industrial textile effluents by treating two types of commonly encountered dyes: blue maxilon (BM), of cationic nature, and black eriochrome (NE), of anionic nature. We intend to employ an innovative approach based on the adsorption of these dyes onto a novel vegetal biomaterial derived from Aleppo pine fibers (FPAs). A kinetic and thermodynamic study was conducted. The effect of some physicochemical parameters on both dye adsorption and FPAs was also evaluated. The modeling of the adsorption results was performed using Langmuir, Freundlich, Temkin, and Dubinin Radushkevich (D-R) isotherms. The results indicate that the equilibrium time strongly depends on the initial concentration of the two dyes, being 60 min with pseudo-second-order adsorption kinetics for both dyes. Adsorption isotherms under the optimal conditions of adsorbent mass, temperature, medium pH, and dye concentration were used to determine the maximum adsorption efficiency, which was close to 93% and 98% for BM and NE, respectively. The results also show that the adsorption of both dyes on FPAs fits well with Langmuir’s model. The thermodynamic study indicates that the adsorption of both dyes on FPAs is spontaneous and exothermic in nature for BM and endothermic for NE.
The aim of this study is to assess groundwater pollution in the city of Taza, Morocco. This was accomplished through hydrochemical and biological investigations, focusing on analyzing the physicochemical and bacteriological parameters of groundwater. Water samples were collected from wells and sources within Taza City on a monthly basis during the spring and summer of 2023. These samples were subjected to analysis to identify physicochemical and bacteriological characteristics. The findings revealed multiple contaminations, primarily stemming from two sources: significant microbial pollution observed in 100% of samples due to runoff percolation and discharge of domestic and industrial wastewater, and varying degrees of chemical pollution observed across all samples. The results underscored deviations from national standards, notably in parameters such as dissolved oxygen, nitrate, and nitrite concentrations. These parameters exhibited values either lower or higher than the established norm.