El Mokhtar SAOUDI HASSANI

Mr. El Mokhtar SAOUDI HASSANI

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 October 2024 in Polymers
Verified
Journal Article
Open access
PDF file
El Mokhtar SAOUDI HASSANIEl Mokhtar SAOUDI HASSANI
El Mokhtar SAOUDI HASSANI
Hugo DuarteHugo Duarte
Hugo Duarte
JBJoão Brás
João Brás
ATAbdeslam TALEB
Abdeslam TALEB
MTMustapha Taleb
Mustapha Taleb
Bruno MedronhoBruno Medronho
Bruno Medronho
Currently, industrial water pollution represents a significant global challenge, with the potential to adversely impact human health and the integrity of ecosystems. The continuous increase in global consumption has resulted in an exponential rise in the use of dyes, which have become one of the major water pollutants, causing significant environmental impacts. In order to address these concerns, a number of wastewater treatment methods have been developed, with a particular focus on physicochemical approaches, such as adsorption. The objective of this study is to investigate the potential of a bio-based material derived from olive oil pomace (OOP) as an environmentally friendly bio-adsorbent for the removal of methylene blue (MB), a cationic dye commonly found in textile effluents. The biobased material was initially characterized by determining the point of zero charge (pHpzc) and using scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). Subsequently, a comprehensive analysis was conducted, evaluating the impact of specific physicochemical parameters on MB adsorption, which included a thorough examination of the kinetic and thermodynamic aspects. The adsorption process was characterized using Langmuir, Freundlich, Brunauer-Emmett-Teller (BET), and Dubinin Radushkevich (D-R) isotherms. The results suggest that the equilibrium of adsorption is achieved within ca. 200 min, following pseudo-second-order kinetics. The optimal conditions, including adsorbent mass, temperature, bulk pH, and dye concentration, yielded a maximum adsorption capacity of ca. 93% (i.e., 428 mg g−1) for a pomace concentration of 450 mg L−1. The results suggest a monolayer adsorption process with preferential electrostatic interactions between the dye and the pomace adsorbent. This is supported by the application of Langmuir, BET, Freundlich, and D-R isotherm models. The thermodynamic analysis indicates that the adsorption process is spontaneous and exothermic. This work presents a sustainable solution for mitigating MB contamination in wastewater streams while simultaneously valorizing OOP, an agricultural by-product that presents risks to human health and the environment. In conclusion, this approach offers an innovative ecological alternative to synthetic adsorbents.

30 April 2024 in Processes
Verified
Journal Article
Open access
PDF file
El Mokhtar SAOUDI HASSANIEl Mokhtar SAOUDI HASSANI
El Mokhtar SAOUDI HASSANI
DADounia Azzouni
Dounia Azzouni
ARA. F. M. Motiur Rahman
A. F. M. Motiur Rahman
IMImane Mehdaoui
Imane Mehdaoui
Rachid MahmoudRachid Mahmoud
Rachid Mahmoud
ZRZakia Zakia RAIS
Zakia Zakia RAIS
The aim of this study is to purify industrial textile effluents by treating two types of commonly encountered dyes: blue maxilon (BM), of cationic nature, and black eriochrome (NE), of anionic nature. We intend to employ an innovative approach based on the adsorption of these dyes onto a novel vegetal biomaterial derived from Aleppo pine fibers (FPAs). A kinetic and thermodynamic study was conducted. The effect of some physicochemical parameters on both dye adsorption and FPAs was also evaluated. The modeling of the adsorption results was performed using Langmuir, Freundlich, Temkin, and Dubinin Radushkevich (D-R) isotherms. The results indicate that the equilibrium time strongly depends on the initial concentration of the two dyes, being 60 min with pseudo-second-order adsorption kinetics for both dyes. Adsorption isotherms under the optimal conditions of adsorbent mass, temperature, medium pH, and dye concentration were used to determine the maximum adsorption efficiency, which was close to 93% and 98% for BM and NE, respectively. The results also show that the adsorption of both dyes on FPAs fits well with Langmuir’s model. The thermodynamic study indicates that the adsorption of both dyes on FPAs is spontaneous and exothermic in nature for BM and endothermic for NE.

7 June 2024 in Bioresources and Bioprocessing
Verified
Journal Article
Open access
PDF file
El Mokhtar SAOUDI HASSANIEl Mokhtar SAOUDI HASSANI
El Mokhtar SAOUDI HASSANI
IMImane Mehdaoui
Imane Mehdaoui
DADounia Azzouni
Dounia Azzouni
RMRachid Mahmoud
Rachid Mahmoud
ATAbdeslam Taleb
Abdeslam Taleb
ZRZakia Rais
Zakia Rais
The global scientific community is deeply concerned about the deterioration of water quality resulting from the release of industrial effluents. This issue is of utmost importance as it serves to safeguard the environment and combat water pollution. The objective of this work is to elaborate a biomaterial of vegetable origin, based on the twigs of Aleppo pine, and to use it as an abundant and less expensive material for the treatment of wastewater. For this reason, the twigs were treated physically to get the powder called biomaterial FPA (Aleppo pine fiber), which was characterized by physicochemical, and spectroscopic analyses namely scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The crystallinity index of FPA was evaluated by the peak height method. The findings indicate that the FPA powder has an acidic nature, exhibiting a porous structure that promotes the adsorption and binding of molecules. Additionally, it has a zero charge point of 5.8 and a specific surface area of 384 m2.g−1. It is primarily composed of hydroxyl, carboxyl, and amine functional groups, along with mineral compounds and organic compounds, including cellulose and other mineral elements such as Ca, Mg, Fe, Na, P, Al, K, Ni, and Mo. Combining these characteristics, FPA biomaterial has considerable potential for use as an effective adsorbent biomaterial for various wastewater pollutants. Its abundance and relatively low cost make it an attractive solution to the growing challenges of water pollution worldwide. Graphical Abstract

1 November 2023 in Ecological Engineering & Environmental Technology
Verified
Journal Article
Open access
Rachid MahmoudRachid Mahmoud
Rachid Mahmoud
IMImane Mehdaoui
Imane Mehdaoui
FMFatima-Zahra El Madani
Fatima-Zahra El Madani
BMBEN ABBOU Mohamed
BEN ABBOU Mohamed
ZMZineb Majbar
Zineb Majbar
ZRZakia Zakia RAIS
Zakia Zakia RAIS
The city of Taza, situated in Morocco, boasts a significant ecological heritage. However, a concerning practice of discharging untreated wastewater into the nearby Oueds has raised apprehensions about potential threats to public well-being. This research endeavors to discern the locations most...

9 April 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
El Mokhtar SAOUDI HASSANIEl Mokhtar SAOUDI HASSANI
El Mokhtar SAOUDI HASSANI
RSRajae Salim
Rajae Salim
EEElhachmia Ech-Chihbi
Elhachmia Ech-Chihbi
HZHind Zejli
Hind Zejli
IMImane Mehdaoui
Imane Mehdaoui
ZRZakia Rais
Zakia Rais
The present research focuses on the valorization of residues from the treatment of colored wastewater as eco-friendly corrosion inhibitors for mild steel in a 1 M HCl medium. These residues are derived from Aleppo pine fibers treated with Maxilon Blue dye (RFPABM) and Eriochrome Black dye (RFPANE). The study evaluated their corrosion inhibition performance using weight loss measurements, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). Furthermore, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM–EDX) was employed to analyze the surface morphology of the mild steel samples. The results demonstrated significant inhibition efficiencies of 84.3% for crude Aleppo pine fiber extract (FPA), 90.5% for RFPABM, and 90.1% for RFPANE at an optimal concentration of 1 g/L. The polarization studies identified these extracts as mixed-type inhibitors, effectively reducing both anodic and cathodic reactions. EIS analysis revealed a decrease in double-layer capacitance (Cdl) with increasing inhibitor concentration, indicating robust adsorption of the inhibitors on the steel surface and the formation of a protective barrier. Adsorption isotherm analysis showed that the adsorption of FPA and RFPABM on the mild steel surface follows both Langmuir and Temkin models, suggesting monolayer adsorption with possible lateral interactions between adsorbed molecules. In contrast, RFPANE strictly adhered to the Langmuir model, indicating uniform adsorption sites without significant interactions between adsorbed molecules. SEM–EDX analysis corroborated these findings by revealing smoother and less corroded surfaces in the presence of inhibitors compared to the uninhibited sample, which exhibited severe degradation. The protective film formed by the inhibitors was rich in oxygen and carbon, confirming the presence of adsorbed organic compounds from the extracts.

1 December 2024 in Environmental Research Communications
Verified
Journal Article
Open access
IMImane Mehdaoui
Imane Mehdaoui
ZMZineb Majbar
Zineb Majbar
El Mokhtar SAOUDI HASSANIEl Mokhtar SAOUDI HASSANI
El Mokhtar SAOUDI HASSANI
RMRachid Mahmoud
Rachid Mahmoud
MAMohamed Ben Abbou
Mohamed Ben Abbou
Fuad KhoshnawFuad Khoshnaw
Fuad Khoshnaw
Recently, medicinal and aromatic plants (MAP) gained a particular interest for their application in various fields such as food science, pharmacy, etc). MAP processing results in huge amounts of residual biomasses (RB). Such RB are valuable as they contain nutrients that can be recycled into high-value products rather than being considered waste. Composting emerges as a promising solution, effectively converting this biomass into a nutrient-rich product essential for plant growth. This research aimed to valorize RB from MAP through co-composting with green waste (GW) and poultry manure (PM) by optimising the initial mixture composition and evaluating the compost’s quality. A statistical mixture design approach was utilized to optimize the initial mixture composition. Sixteen of experiments were performed, focusing on pH and C/N ratio as response parameters. After monitoring the composting process, physicochemical parameters and the quality of the compost produced were evaluated. The results led to the successful development and validation of two response models using analysis of variance. The ideal mixture composition was found to be 45% RB-MAP, 25%PM, and 30% GW. The final compost exhibited a low C/N ratio, was rich in fertilizing and nutritive elements, and importantly, showed no phytotoxic effects. This research underscores the potential of composting as a sustainable method to convert RB into valuable agricultural resources.