Accurate and continuous, non-invasive blood pressure (BP) monitoring plays a vital role in the long-term management of cardiovascular diseases. Advances in wearable and flexible sensing technologies have facilitated the transition of non-invasive BP monitoring from clinical settings to ambulatory home environments. However, the measurement consistency and algorithm adaptability of existing devices have not yet reached the level required for routine clinical practice. To address these limitations, comprehensive innovations have been made in material development, sensor design, and algorithm optimization. This review examines the evolution of non-invasive continuous BP measurement, highlighting cutting-edge advances in flexible electronic devices and BP estimation algorithms. First, we introduce measurement principles, sensing devices and limitations of traditional non-invasive BP measurement, including arterial tonometry, arterial volume clamp, and ultrasound-based methods. Subsequently, we review the pulse wave analysis-based BP estimation methods from two perspectives: flexible sensors based on optical, mechanical, and electrical principles, and estimation models that use physiological features or raw waveforms as input. Finally, we conclude the existing challenges and future development directions of flexible electronic technology and intelligent estimation algorithms for non-invasive continuous BP measurement.
Textiles are ideal platforms for wearable electronics due to their inherent softness and superior thermophysiological comfort. However, conventional textiles prioritize wearer comfort at the cost of the stringent thermal‐optical demands imposed by embedded electronics, often sacrificing scalability, breathability, electronic integrability, device performance, and user safety. Here, we report a wearable tailored passive radiative cooling textile (WRCT) for seamless integration of flexible electronics. The WRCT was fabricated via a scalable, one‐step, and additive‐free wet‐spinning technique. Hierarchical phase inversion kinetics create microfibers with multiscale porosity and surface nodules, achieving solar reflectance (>95%) and mid‐infrared emissivity (0.96). This single‐material platform satisfies the conflicting requirements of wearing comfort and electronic functionality by providing breathability, flexibility, and passive daytime thermal management. These properties thermally decouple electronics from the skin and keep skin temperature below 41°C even under intense sunlight (500 W/m 2 ) combined with a localized heat load equivalent to a heat flux of approximately 17 kW/m 2 over a 142 mm 2 area, simulating high‐power microcontrollers, conditions that cause low‐temperature burns within minutes on conventional textiles. By converting a commodity polymer into an advanced thermal‐optical regulator through a mature and scalable fiber‐production process, this textile establishes a practical, safe, and manufacturable foundation for reliable, all‐day wearable electronic systems.
1 September 2025 in IEEE Journal of Biomedical and Health Informatics
Hypertension is a major risk factor for cardiovascular diseases and all-cause mortality, making accessible and easy blood pressure (BP) measurement, such as cuffless methods, crucial for its prevention, detection, and management. Cuffless BP estimation using wearable cardiovascular signals via deep learning models (DLMs) offers a promising solution. However, implementation of the DLMs usually requires high computational cost and time. This study addresses these challenges by offering an end-to-end broad learning model (BLM) for effective and efficient cuffless BP estimation. The BLM increases network width rather than depth compared to DLMs, reducing computational complexity and improving training efficiency for continuous BP estimation. We also explore an incremental learning mode that provides high memory efficiency and flexibility. Validation of the proposed method on the University of California Irvine (UCI) database, which spanned 403.67 hours, demonstrated that the standard BLM (SBLM) achieves a mean absolute error (MAE) of 11.72 mmHg for the estimation of the arterial BP (ABP) waveform, which was comparable to the performance to DLMs, such as long short-term memory (LSTM) and the one-dimensional convolutional neural network (1D-CNN), while significantly improving training efficiency by 25.20 times. Furthermore, incremental BLM (IBLM) provides a horizontal scalability approach, which involves expanding the model by adding nodes in a single layer rather than increasing the number of layers, for incremental learning, effectively updating the model while maintaining comparable predictive performance. This approach reduces storage demands by supporting incremental learning with streaming or partial datasets. In addition, the mean absolute error (MAE) (mean error (ME) ± standard deviation (SD)) values of the SBLM for predicting systolic BP (SBP) and diastolic BP (DBP) were 3.04 mmHg (2.85 ± 4.15 mmHg) and 2.57 mmHg (-2.47 ± 3.03 mmHg). This study highlights the potential of BLM for personalized, real-time, and continuous cuffless BP monitoring, offering a practical solution for healthcare applications.