The objective of this study was to understand whether voids intensify the triggering of reinforcement corrosion in cellular concrete, for slabs with light specific masses. The methodology was based on four tests: visual inspection, corrosion potential, electrical resistivity, and mass loss. In relation to the L1 family, the L2 and L3 families (higher air content) were shown to be more susceptible to reinforcement corrosion and mass loss from the steel bars in 90% of cases. However, the behavior of some slabs indicates the possibility of the process being asymptomatic with regard to staining, considering that the influence of the cover on the corrosion of the steel bars was verified
Mineral expansive from FDG—flue-gas desulfurization—blended with calcium aluminate cement CAC was analyzed as mitigation shrinkage of alkali-activated residual mortars AAM. The AAM mortars were composed of red mud (RM) and bottom ash (BA), as precursors of a metakaolin MK-based system. MK replacement (0, 50, 70%) in alkaline solution (10M) and ratio 1:2 (binder/sand) was studied. Engineering properties were performed, and included mechanical strength, setting times, and dry shrinkage (HR 60%), as well as the microstructure formed at 7 d and 28 days. A total of 10% CAC-FGD dosage was the most efficient, reducing drying shrinkage by 23% and autogenous shrinkage by up to 30%. The findings showed that this addition also improved mechanical strength by approximately 16% at 28 days. Under the addition of CAC-FGD, the results suggest the presence of aluminosilicate gels of the (Na,C)-(A)-S-H type and the formation of ettringite, which are possibly responsible for ensuring good performance and a controlled expansion that, in turn, compensates for the shrinkage of the activated mortars.
In parallel with the alkaline activation of aluminosilicates, acid activation takes place. Often less studied, the so-called phosphate-based geopolymers are little publicized due to the concerns that arise during their manufacture. However, they are presented as materials with greater mechanical strength and greater chemical stability than alkaline activations. Thus, their applications are not as simple as forming structural parts, but in specific applications that do not require an integral core. The acidic and alkaline activation of metakaolin and fly ash was evaluated in the fresh and hardened state using calorimetry, mini-slump, rotational rheology and compressive strength. For unitary systems, acid activation presented greater compressive strength than alkaline activation. However, for hybrid systems there was a limitation in the incorporation of fly ash, which, over time, favored the mechanical behavior of alkaline systems over acids systems.