Madeleing Taborda-Barraza

Dr. Madeleing Taborda-Barraza

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2021 in Cement and Concrete Composites
Verified
Journal Article
Closed access
MTMadeleing Taborda-Barraza
Madeleing Taborda-Barraza
Fernando PelisserFernando Pelisser
Fernando Pelisser
PGPhilippe Gleize
Philippe Gleize

2 September 2022 in Materials
Verified
Journal Article
Open access
PDF file
MTMadeleing Taborda-Barraza
Madeleing Taborda-Barraza
FPFrancine Padilha
Francine Padilha
LSLaura Silvestro
Laura Silvestro
AAAfonso Azevedo
Afonso Azevedo
PGPhilippe Gleize
Philippe Gleize
Despite geopolymers having emerged as a more sustainable alternative to Portland cement, their rheological properties still need to be thoroughly investigated, aiming at the material’s applicability. Additionally, studies that evaluated the fresh state of geopolymer composites with nanomaterials are scarce. Thus, two metakaolin-based geopolymer systems were reinforced with nanomaterials with a similar geometry: carbon nanotubes (CNT) and silicon carbide whiskers (SCW). The nanomaterials incorporation was assessed by rotational rheometry (conducted up to 110 min), isothermal calorimetry, compressive strength after 7 and 28 days, and the microstructure was investigated using X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). CNT and SCW incorporation (0.20 wt.%) did not significantly affect the yield stress and viscosity of the R2-group (based on metakaolin type 2), while increasing the rheological parameters up to 56.0% for the R1-group (based on metakaolin type 1). Both additions modified the reaction kinetics. Increments of up to 40.7% were observed in the compressive strength of geopolymer pastes with the incorporation of a SCW content of 0.2 wt.%. XRD and FTIR results suggest similar structural modifications between precursors. Nevertheless, R2 showed substantial transformations while the R1 group exhibited anhydrous material that can react over time. Overall, incorporating CNT and SCW contributed to higher mechanical increments on systems with average mechanical strength (R1) compared to systems with higher potential mechanical performance (R2).

15 April 2026 in Minerals
Verified
Journal Article
Open access
PDF file
LRLarissa Rocha
Larissa Rocha
MTMadeleing Taborda-Barraza
Madeleing Taborda-Barraza
CVCarlos Maurício Fontes Vieira
Carlos Maurício Fontes Vieira
AAAfonso Azevedo
Afonso Azevedo
MARKSSUEL TEIXEIRA MARVILAMARKSSUEL TEIXEIRA MARVILA
MARKSSUEL TEIXEIRA MARVILA
Population growth and rapid urbanization have significantly increased construction activities and the demand for building materials. It is estimated that approximately 39% of global CO2 emissions are associated with the construction sector, with nearly 8% directly attributed to Portland cement production. In addition to greenhouse gas emissions, the cement industry is responsible for substantial environmental impacts, including natural resource depletion, soil degradation, and air and water pollution. In this context, the development of alternative and more sustainable binder systems has become a global research priority. Geopolymers have emerged as promising materials produced through either alkaline or acid activation routes, offering advantages such as a reduced carbon footprint, high durability, and rapid strength development. Among these systems, acid-activated materials, particularly phosphate-based geopolymers, differ fundamentally from conventional alkali-activated binders in terms of reaction chemistry and binding phases. The formation of aluminum phosphate (AlPO4) networks plays a key role in governing the mechanical performance and microstructural stability of these materials. This mini-review provides a critical overview of the fundamental principles of acid activation applied to alternative cementitious materials, with emphasis on dissolution mechanisms, polycondensation reactions, and the nature of binding phases in phosphate-based systems. Unlike previous reviews, this study integrates recent findings on reaction mechanisms with a comparative analysis between acid and alkaline activation routes, highlighting underexplored aspects of precursor reactivity and binder formation. The main types of acids used as activators, the influence of precursor chemical composition, and the conceptual differences between acid and alkaline activation are discussed. In addition, recent advances, current challenges, and future perspectives of acid activation are addressed, highlighting its potential as a viable low-carbon binder route for sustainable construction materials, with strong prospects for partially replacing Portland cement, particularly in high-performance applications requiring enhanced chemical resistance and thermal stability.

1 January 2020 in Revista UIS Ingenierías
Verified
Journal Article
Open access
MTMadeleing Taborda-Barraza
Madeleing Taborda-Barraza
NANagilla Huerb de Azevedo
Nagilla Huerb de Azevedo
PGPhilippe Gleize
Philippe Gleize
NPNatalia Prieto-Jimenez
Natalia Prieto-Jimenez

1 January 2025 in Ambiente Construído
Verified
Journal Article
Open access
PDF file
MTMadeleing Taborda-Barraza
Madeleing Taborda-Barraza
VAVanessa de Amorim Amorim
Vanessa de Amorim Amorim
TMThais Marques da Silva Moura
Thais Marques da Silva Moura
PGPhilippe Gleize
Philippe Gleize
In parallel with the alkaline activation of aluminosilicates, acid activation takes place. Often less studied, the so-called phosphate-based geopolymers are little publicized due to the concerns that arise during their manufacture. However, they are presented as materials with greater mechanical strength and greater chemical stability than alkaline activations. Thus, their applications are not as simple as forming structural parts, but in specific applications that do not require an integral core. The acidic and alkaline activation of metakaolin and fly ash was evaluated in the fresh and hardened state using calorimetry, mini-slump, rotational rheology and compressive strength. For unitary systems, acid activation presented greater compressive strength than alkaline activation. However, for hybrid systems there was a limitation in the incorporation of fly ash, which, over time, favored the mechanical behavior of alkaline systems over acids systems.

26 November 2023 in SIMPÓSIO BRASILEIRO DE TECNOLOGIA DAS ARGAMASSAS
Verified
Conference Paper
Open access
PDF file
LSLaura Silvestro
Laura Silvestro
MTMadeleing Taborda-Barraza
Madeleing Taborda-Barraza
GLGeannina Terezinha dos Santos Lima
Geannina Terezinha dos Santos Lima
ARArtur Spat Ruviaro
Artur Spat Ruviaro
PGPhilippe Gleize
Philippe Gleize
Os geopolímeros vem recebendo grande atenção e são considerados potenciais materiais alternativos ao cimento Portland. Entretanto, os estudos que avaliaram as propriedades reológicas de compósitos geopoliméricos com a incorporação de nanotubos de carbono (NTC) ainda são escassos. Diante disso, este estudo teve por objetivo avaliar o comportamento reológico através do ensaio de reometria rotacional de pastas de geopolímero produzidas com dos tipos de metacaulim (MK1 e MK2) e teor de NTC de 0,2% em relação a massa de precursor. Um estudo preliminar mostrou que o modelo de Casson foi o que apresentou o melhor ajuste aos dados reológicos para ambos os tipos de precursores avaliados. Além disso, verificou-se que a incorporação de NTC não afetou significativamente a tensão de escoamento dos compósitos. Em contrapartida, os NTC ocasionaram um aumento de 18,4% na viscosidade da matriz composta pelo MK1.