Sivanesan Murugesan

Prof. Sivanesan Murugesan


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 October 2016 in SAE International Journal of Passenger Cars - Mechanical Systems
Verified
Journal Article
Closed access
PDF file
SMSivanesan Murugesan
Sivanesan Murugesan
GJG Jayabalaji
G Jayabalaji
Analytical and numerical study is carried out to study the behavior of stick-slip and judder phenomenon during engaging and disengaging of the automotive clutch. For this purpose, a four degree of freedom torsional power train lumped mass model is developed. This torsional vibration system includes engine-flywheel, clutch, gear box and vehicle drive line, which are connected to each other by shafts. Equation of motion of the system is developed and initially a stability analysis is carried out for various gradients of coefficient of friction using eigen value analysis. Later, a numerical simulation is carried out to analyze the judder and stick-slip phenomenon using commercially available mathematical tool MATLAB. It is observed that the clutch stick-slip is increased with increase in external torque and clutch pressure fluctuations.

4 July 2018 in International Journal of Engineering & Technology
Verified
Journal Article
Closed access
PDF file
KBKompalli Bhavani
Kompalli Bhavani
SMSivanesan Murugesan
Sivanesan Murugesan
This paper aims to develop a process for conversion of Diesel Engine for Dual Fuel operation which is basically designed to reduce the economic costs and pollutant Emissions. The increasing cost of Diesel Fuel leads to the necessity of an Alternate fuel, i.e Compressed Natural gas (CNG). In this research a 16 cylinder, 50.25liter, Turbocharged After cooler V-shaped Engine is used for the conversion into Dual Fuel Engine. Dual fuel engine can be operated on both Diesel and CNG modes simultaneously. In this Engine the Air and CNG are mixed in required ratios in an Air- Gas mixer and the mixture is injected into the Combustion chamber. As Gaseous fuel CNG cannot self-ignite itself because of its high Auto ignition temperature a required amount of Diesel is injected into the Combustion Chamber at the end of compression stroke for ignition purpose which is known as Secondary fuel or a PILOTFUEL. This paper tries to show the process development of converting Diesel Engine for dual fuel operation on multiple platforms.

4 July 2018 in International Journal of Engineering & Technology
Verified
Journal Article
Closed access
MKM Vignesh Kumar
M Vignesh Kumar
SMSivanesan Murugesan
Sivanesan Murugesan
This research aims to the development of intake restrictor of a formula SAE car engine which is of 300cc parallel twin cylinder engine. In this paper we have considered different venturi designs which have different convergence and divergence angles. The main aim is to optimize the pressure and velocity of air which tends to offer better combustion reflects in performance. The parameters which are to be considered for design as well as analysis are mach number, intake velocity, mass flow rate, etc.., To perform this research we have chosen the Ansys fluent software tool and the analytical calculations were made for standard design. It is observed that the continuous variations in converging and diverging angles offers better results in both pressure and velocity characteristics of air entering for combustion.

14 January 2015 in SAE International Journal of Advances and Current Practices in Mobility
Verified
Conference Paper
Closed access
PDF file
SMSivanesan Murugesan
Sivanesan Murugesan
LCLakshmikanthan Chinnasamy
Lakshmikanthan Chinnasamy
APAbhijeet Patil
Abhijeet Patil
Appropriate test cycle is required for engine testing. To do so, a new methodology is developed for deriving Engine Test Cycle based on real world duty cycle. Transient speed and load is to be collected from the functional engine on the field. The duty cycle for cyclic operation will be developed from the actual transient speed and load conditions. An iterative process and the comparison of chi-square statistical data is used to categorize typical microtrips, segments of engine operation collected during performance of certain activities. Different microtrips of all activities were combined together to make up a cycle of operation and test cycle as well. These data's are compared to statistical data which is used to illustrate the raw data. On successful comparison, the transient test cycle is validated on the test bed. To facilitate further engine testing, the cycle is transformed into a schedule of torque and speed points at One second intervals. FTP (Federal Test Procedure) is used for normalizing the Data. From the conducted work a representative test cycle is developed for engine testing with respect to the application, also a general methodology is derived for engine test cycle development.

6 February 2025 in Engineering Research Express
Verified
Journal Article
Closed access
SDsenthil kumar D
senthil kumar D
SMSivanesan Murugesan
Sivanesan Murugesan
PTPraveenkumar Thangavelu
Praveenkumar Thangavelu
NANaresh A
Naresh A
This study investigates the performance and emission characteristics of a diesel engine fueled with Azolla microphylla biodiesel blends and the effects of aluminium oxide (Al2O3) and copper oxide (CuO) nanoparticles as fuel additives. Azolla microphylla, an aquatic fern, was used to produce biodiesel through a transesterification process. Diesel fuel was blended with Azolla biodiesel in ratios of 10:90 (B10), 20:80 (B20), and 30:70 (B30). Engine performance parameters, including brake thermal efficiency (BTE), brake-specific fuel consumption (BSFC), and emissions of carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOx), and smoke, were evaluated. The results showed that the B30 blend exhibited the highest BTE under maximum load conditions. To address the high viscosity and poor combustion performance of higher biodiesel blends, Al2O3 and CuO nanoparticles were added to the B30 blend at concentrations of 50 ppm and 100 ppm. The B30 blend with 100 ppm Al2O3 nanoparticles demonstrated the highest BTE and the lowest emissions of HC, CO, CO2, and smoke compared to the other test blends. The improved combustion and reduced emissions were attributed to the enhanced heat transfer and catalytic properties of the Al2O3 nanoparticles. These findings suggest that Azolla biodiesel, especially when combined with Al2O3 nanoparticles, can be a viable and sustainable alternative to conventional diesel fuel.

9 June 2026 in International Journal of Ambient Energy
Verified
Journal Article
Closed access
SMSivanesan Murugesan
Sivanesan Murugesan
SSSrihari S
Srihari S
SDSenthilkumar Duraisamy
Senthilkumar Duraisamy
PTPraveenkumar Thangavelu
Praveenkumar Thangavelu
ANNArtificial neural networkATDCAfter top dead centreBTEBrake thermal efficiencyBSFCBrake specific fuel consumptionCACrank angleCH4MethaneCICompression ignitionCLDChemiluminescence detectorCOCarbon...