This paper proposes a modified maximum power point tracking (MPPT) algorithm for photovoltaic systems under rapidly changing partial shading conditions (PSCs). The proposed algorithm integrates a genetic algorithm (GA) and the firefly algorithm (FA) and further improves its calculation process via a differential evolution (DE) algorithm. The conventional GA is not advisable for MPPT because of its complicated calculations and low accuracy under PSCs. In this study, we simplified the GA calculations with the integration of the DE mutation process and FA attractive process. Results from both the simulation and evaluation verify that the proposed algorithm provides rapid response time and high accuracy due to the simplified processing. For instance, evaluation results demonstrate that when compared to the conventional GA, the execution time and tracking accuracy of the proposed algorithm can be, respectively, improved around 69.4% and 4.16%. In addition, in comparison to FA, the tracking speed and tracking accuracy of the proposed algorithm can be improved around 42.9% and 1.85%, respectively. Consequently, the major improvement of the proposed method when evaluated against the conventional GA and FA is tracking speed. Moreover, this research provides a framework to integrate multiple nature-inspired algorithms for MPPT. Furthermore, the proposed method is adaptable to different types of solar panels and different system formats with specifically designed equations, the advantages of which are rapid tracking speed with high accuracy under PSCs.
1 October 2021 in Energy Conversion and Management
A rapid response optimization technique for photovoltaic maximum power point tracking (MPPT) under partial shading conditions (PSCs) is proposed in this study. To improve the solar MPPT tracking speed for rapidly-changing environmental conditions and to prevent the conventional firefly algorithm (FA) from becoming trapped at the local peaks and oscillations during the search process, a novel fusion algorithm, named the modified firefly algorithm (MFA), is proposed. The MFA integrates and modifies the processes of two algorithms, namely the firefly algorithm with neighborhood attraction (NaFA) and simplified firefly algorithm (SFA). A modified attraction process for the NaFA is used in the first iteration to avoid trapping at local maximum power points (LMPPs). In addition, in order to improve the convergence speed, the attractiveness factor of the attraction process is designed to be related to the power and position difference of the fireflies. Furthermore, the number of fireflies is designed to decrease in proportion with the iterations in the modified SFA process. Results from both the simulations and evaluations verify that the proposed algorithm offers rapid response with high accuracy and efficiency when encountering PSCs. In addition, the MFA can avoid becoming trapped at LMPPs and ease the oscillations during the search process. Consequently, the proposed method could be considered to be one of the most promising substitutes for existing approaches. In addition, the proposed method is adaptable to different types of solar panels and different system formats with specifically designed parameters.
This paper presents a novel modified Complementary SuDoKu puzzle (MC-SDKP) topology for the static reconfiguration of photovoltaic (PV) arrays. It was developed with the aim of enhancing the power output of a PV array which is exposed to partially shaded conditions (PSCs). To disperse patterns of both center shading and corner shading, the MC-SDKP technique modified and combined the Optimal SDKP and the Complementary SDKP (C-SDKP) topologies. An 8 × 8 PV array configured with the MC-SDKP topology was exposed to nine different shading patterns, and its performance was compared with that of the other four topologies. The results of the performance evaluation confirmed that, when configured according to the MC-SDKP, the PV array produced the highest average power output among all five topologies, with a 15.07% higher output on average than the total-cross tied. The PV array with the MC-SDKP topology also exhibited the lowest average power loss (1.34%). This study clearly established the effectiveness of the MC-SDKP topology at mitigating the effects of both center and corner shading. The advantages of the MC-SDKP reconfiguration technique are: an increase in extracted power, a reduction in current mismatch losses, an improvement in shade dispersion under conditions of center shading, and good scalability.
A novel Lo Shu and Optimal SuDoKu Puzzle Fusion Topology (LS-OSDKP) is presented to disperse shading effects and enhance photovoltaic (PV) array output power under partial shading conditions (PSCs). Incorporating the ancient Chinese Lo Shu magic square puzzle and the Optimal SDKP topologies, the proposed LS-OSDKP is capable of alleviating current mismatch losses, decreasing wiring loss, simplifying the P-V curves of the array, and significantly improving shading dispersion. Under seven PSCs, the performance of the proposed topology was evaluated using a 9 × 9 PV array and compared to the total-cross-tied (TCT), Twisted Two-Step, SDKP, Optimal SDKP, and Lo Shu topologies. Simulation and evaluation results confirmed that the proposed method could extract the highest averaged power of the PV array among the six topologies, with a 9.13%/8.67% power improvement when compared to the TCT. Additionally, the LS-OSDKP is capable of effectively reducing the wiring length by 29.09% compared to the Lo Shu. Moreover, the proposed method has the highest potential for energy savings and revenue generation. Compared to the conventional TCT configuration, it could improve extracted energy by approximately 9.58% and shorten payback time by approximately 9.06%. Consequently, the advantages of the proposed LS-OSDKP topology include an increase in extracted power, a reduction in wiring loss, and a shorter energy payback period.