There have been many studies conducted to replace the conventional internal combustion engine (ICE) with a more efficient engine, due to increasing regulations over vehicles’ emissions. Throughout the years, several external combustion engines were considered as alternatives to these traditional ICEs for their intrinsic benefits, among which are Stirling machines. These were formerly utilized in conventional powertrains; however, they were not implemented in hybrid vehicles. The purpose of this study is to investigate the possibility of implementing a Stirling engine in a series hybrid electric vehicle (SHEV) to substitute the ICE. Exergy analysis was conducted on a mathematical model, which was developed based on a real simple Stirling, to pinpoint the room for improvements. Then, based on this analysis, other configurations were retrieved to reduce exergy losses. Consequently, a Stirling-SHEV was modeled, to be integrated as auxiliary power unit (APU). Hereafter, through an exergo-technological detailed selection, the best configuration was found to be the Regenerative Reheat two stages serial Stirling (RRe-n2-S), offering the best efficiency and power combination. Then, this configuration was compared with the Regenerative Stirling (R-S) and the ICE in terms of fuel consumption, in the developed SHEV on the WLTC. This was performed using an Energy Management Strategy (EMS) consisting of a bi-level optimization technique, combining the Non-dominated Sorting Genetic Algorithm (NSGA) with the Dynamic Programming (DP). This arrangement is used to diminish the fuel consumption, while considering the reduction of the APU’s ON/OFF switching times, avoiding technical issues. Results prioritized the RRe-n2-S presenting 12.1% fuel savings compared to the ICE and 14.1% savings compared to the R-S.
Considerable efforts have been invested in the automotive industry on electrified powertrains in order to reduce passenger cars’ dependence on fossil fuels. Powertrains electrification resulted in a wide range of mass-production hybrid vehicle models, ranging from micro-hybrid, to mild, full, and battery-extended hybrids such as plug-in and range-extender electric vehicles. Fuel savings of these powertrains strongly rely on the energy management strategy deployed on-board, as well as on the technology used to recover the waste heat energy. This paper investigates the fuel savings potential of a mild hybrid vehicle using an organic Rankine cycle for generating electricity from the engine-coolant circuit. The net mechanical power and electrical power generated from the organic Rankine cycle are determined based on experimental data recorded on a 1.2-L turbocharged engine. The coolant temperature is regulated at 85°C and 105°C depending on the engine load. The R-1234yf organic fluid is used and the Rankine operating pressure has been controlled to maximize the overall system efficiency under technological constraints. The dynamic programming control is used as a global optimal energy management strategy in order to define the best strategy for the engine operation and power-split between the electric and thermal paths of the powertrain. A sensitivity analysis is also performed to find the optimal size of the electric motor while taking into account the additional weight of the organic Rankine cycle system. Results show 2.4% of fuel economy improvement on The Worldwide Harmonized Light Vehicles Test Cycles.
6 October 2017 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Significant research efforts have been invested in the automotive industry on hybrid electrified powertrains in order to reduce the dependence of passenger cars on oil. Electrification of powertrains resulted in a wide range of hybrid vehicle architectures. The fuel consumption of these powertrains strongly relies on the energy converter performance, as well as on the energy management strategy deployed on board. This paper investigates the potential of fuel consumption savings of a series hybrid electric vehicle using a gas turbine as an energy converter instead of the conventional internal-combustion engine. An exergo-technological explicit analysis is conducted to identify the best configuration of the gas-turbine system. An intercooled regenerative reheat cycle is prioritized, offering higher efficiency and higher power density than those of other investigated gas-turbine systems. A series hybrid electric vehicle model is developed and powertrain components are sized by considering the vehicle performance criteria. Energy consumption simulations are performed over the Worldwide Harmonized Light Vehicles Test Procedure driving cycle using dynamic programming as the global optimal energy management strategy. A sensitivity analysis is also carried out in order to evaluate the impact of the battery size on the fuel consumption, for self-sustaining and plug-in series hybrid electric vehicle configurations. The results show an improvement in the fuel consumption of 22–25% with the gas turbine as the auxiliary power unit in comparison with that of the internal-combustion engine. Consequently, the studied auxiliary power unit for the gas turbine presents a potential for implementation on series hybrid electric vehicles.