The fuel savings of plug-in hybrid electric vehicles strongly rely on the energy management strategy deployed onboard. For the current mass-produced plug-in hybrid electric vehicles, notably the Toyota Prius, the energy management strategy is a rule-based type, which is configured to optimize instantly the fuel consumption without taking into consideration the upcoming driving patterns of the given route schedule. Hence, it operates the vehicle first in the electric mode over a predefined all-electric range and then in the charge-sustaining mode. The energy consumption results are seen to be far from optimal when compared with global optimization strategies with prior knowledge of the scheduled route, such as dynamic programming. Hence, this study presents the methodology to optimize the rule-based energy management strategy for real-time implementation in the Prius plug-in hybrid electric vehicle, using dynamic programming as the global optimization routine. The optimization process takes into account the desired trip profile selected by the driver on the vehicle’s onboard Global Positioning System and linked to a traffic management system. A basic rule-based energy management strategy, which emulates the vehicle performance and the energy consumption, has been set first using on-road measurement data logging. As a second step, the dynamic programming optimization routine was applied to the model, assuming a repeated New European Driving Cycle as the scheduled route. The results obtained for the behaviours of the powertrain components under optimal control are evaluated and used to update the operating energy management rules of the basic controller. Finally, an optimized rule-based controller is proposed by coupling between the dynamic programming and the basic rule-based controller, followed by an evaluation of the energy consumption and the powertrain efficiency of the three investigated control strategies.
12 May 2021 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
There have been many studies conducted to replace the conventional internal combustion engine (ICE) with a more efficient engine, due to increasing regulations over vehicles’ emissions. Throughout the years, several external combustion engines were considered as alternatives to these traditional ICEs for their intrinsic benefits, among which are Stirling machines. These were formerly utilized in conventional powertrains; however, they were not implemented in hybrid vehicles. The purpose of this study is to investigate the possibility of implementing a Stirling engine in a series hybrid electric vehicle (SHEV) to substitute the ICE. Exergy analysis was conducted on a mathematical model, which was developed based on a real simple Stirling, to pinpoint the room for improvements. Then, based on this analysis, other configurations were retrieved to reduce exergy losses. Consequently, a Stirling-SHEV was modeled, to be integrated as auxiliary power unit (APU). Hereafter, through an exergo-technological detailed selection, the best configuration was found to be the Regenerative Reheat two stages serial Stirling (RRe-n2-S), offering the best efficiency and power combination. Then, this configuration was compared with the Regenerative Stirling (R-S) and the ICE in terms of fuel consumption, in the developed SHEV on the WLTC. This was performed using an Energy Management Strategy (EMS) consisting of a bi-level optimization technique, combining the Non-dominated Sorting Genetic Algorithm (NSGA) with the Dynamic Programming (DP). This arrangement is used to diminish the fuel consumption, while considering the reduction of the APU’s ON/OFF switching times, avoiding technical issues. Results prioritized the RRe-n2-S presenting 12.1% fuel savings compared to the ICE and 14.1% savings compared to the R-S.
Given the continuous tightening of emissions regulations on vehicles, battery-electric buses (BEB) play an essential role in the transition toward cleaner transport technologies, as they represent the most promising solution to replace diesel buses and reduce their environmental impact in the short term. However, heating the bus cabin leads to a considerable increase in energy consumption under cold weather conditions, which significantly reduces the driving range, given the limited battery capacity. Heat pumps (HP) are the primary heating technology used in BEB for their improved consumption performance compared to other technologies. Therefore, this study aims at optimizing the coefficient of performance (COP) of an HP system in a BEB for maximizing the bus electric driving range under cold weather conditions while maintaining satisfactory thermal comfort levels for passengers. Accordingly, an HP model is developed and integrated into an electric bus model using Dymola. A genetic algorithm (GA) based controller is proposed to find the optimal combination of the HP operating parameters, namely the compressor speed, the air mass flow rate at the inlet of the condenser, and the recirculation rate in order to maximize the system’s COP, and extend the BEB driving at different external temperatures, and as a function of the passengers’ occupancy levels. Results are carried under transient and steady-state operating conditions and show that the proposed GA-based controller saves up to 39% of the HP energy consumption as compared to the conventional HP control strategy, and therefore, enhances the BEB driving range up to 17%.