Magnetic microparticles have many applications in various areas today. The aim of this study was to develop hydrophobic magnetic microparticles as an alternative to traditional methods for high capacity and low cost removal of Victoria Blue R (VBR), which is valuable for industry and commercial, from wastewater and to determine the VBR adsorption ability of this adsorbent. Fe(II)–Co(II) double salt incorporated magnetic poly(2-hydroxyethyl methacrylate-N-methacryloyl-l-tryptophan) [m-poly(HEMA-MATrp)] microparticles were synthesized and used as adsorbent. These microparticles were synthesized in aqueous dispersion medium via microemulsion polymerization using MATrp and HEMA monomers. Magnetic hydrophobic microparticles were characterized via Fourier transform infrared spectroscopy, scanning electron microscopy, and vibrating sample magnetometer. Adsorption experiments were conducted for different conditions (pH, interaction time, amount of microparticles, temperature, and ionic strength) in batch system. VBR adsorption capacity of magnetic hydrophobic microparticles was estimated as 89.46 μmol/g. Adsorption–desorption cycles were repeated 4 times, and there was no significant decrease for the adsorption capacity observed.
28 February 2021 in Journal of the Turkish Chemical Society Section A: Chemistry
In this study, the use of calcined eggshell (CE) as an adsorbent in removing Victoria Blue R (VBR) dyestuff from the solution medium was investigated. For this purpose, pH, interaction time, adsorbate concentration, amount of adsorbent, and salt effect parameters were studied to determine the appropriate adsorption conditions. The highest adsorption yield was obtained in pH 2, 2.0 g/L adsorbent and a stirring time of 5 minutes. 97% of the dye was removed under optimum adsorption conditions. The results obtained from the experimental studies showed that the adsorption mechanism is compatible with the pseudo-second-order kinetic model and the Langmuir isotherm model. SEM and IR analyses were performed for the characterization of calcined eggshells (CE).
2 August 2021 in Chemical Engineering Communications
Chitosan immobilized bone meal (CIBM) was prepared as a biosorbent and Victoria Blue R (VBR) textile dyestuff was removed from wastewater using CIBM via biosorption. For this purpose; the effect of pH, contact time, ionic strength, temperature, biosorbent amount, and initial sorbate concentration were studied in the batch system. The specific surface area, surface morphology and functional groups of CIBM were characterized using BET, SEM and FTIR techniques. In the preliminary biosorption studies with pure bone meal, the removal yield of VBR from solutions of 25 mg/L VBR prepared in pure water was found to be 40.32%, while after modification with chitosan, a removal yield of 98.69% was achieved. As a result, it was observed that the biosorption efficiency increased significantly via modification. The biosorption equilibrium was set at the original pH of the dye with a biosorbent amount of 3.00 g/L in 15 min., which are the optimum adsorption parameters of the batch biosorption process. The removal of VBR from real wastewater was investigated, and the efficiency was found to be 90.40%. Biosorption-desorption cycle was investigated for 11 cycles, and CIBM almost maintained its biosorption capacity until the ninth cycle. Kinetic, isotherm and thermodynamic models were used to analyze the data obtained from the experiments. As kinetic models, pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetic models were used along with the intraparticle diffusion model. For isotherm models, Langmuir, Freundlich, and Dubinin–Radushkevich (D-R) models were employed. It was determined that the experimental biosorption data obey the second-order kinetic model.
13 June 2019 in Environmental Science and Pollution Research
The biosorption method for controlling water pollution can be considered as an alterna-tive method for the pollution of synthetic paints. In this study, the removal of Bril-lant Blue R (BBR) dyestuff, which is a textile dyestuff, by biosorption is investigated. For this purpose, eggshell immobilized with chitosan (ESIC) is designed as a biosorbent. The biosorption mechanism was studied in batch and continuous mode. As far as the batch system is concerned, the following results have been obtained: The optimum pH 2, dye concentration 25 ppm, interaction time 60 minutes, biosorbent amount 2.0 g/L, removal real wastewater 53.28%. Regarding continuous systems, the following f low speed of 0.5 mL/min, biosorbent amount 2.0 g/L, removal real wastewater 91.01%. Also, recycle ex-periments showed that there was 24.11% loss in the biosorption capacity of ESIC for BBR dye after 7 times reuse. Obtained results were consistent with Langmuir and Freundlich isotherm models. All the results demonstrate that ESIC is a natural, recyclable and cost-effective biosorbent for BBR dye removal in wastewater. Keywords: Biosorption; BBR; Eggshell; Chitosan; Dye. DOI: 10.17350/HJSE19030000159 Full Text:
In response to the increasing demand for environmentally friendly and cost-effective adsorbents in wastewater treatment, this study reports the green synthesis, characterization, and application of a magnetic epichlorohydrin Rosa canina (m-ECH-RC) nanocomposite for removing Safranin O (SO), a commonly used cationic dye in textile effluents. The synthesized material was characterized using Brunauer–Emmett–Teller (BET), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and zeta potential analyses to reveal its surface morphology, pore structure, functional groups, crystallinity, and colloidal stability. Adsorption performance was systematically tested under various conditions, including pH, adsorbent dose, contact time, ionic strength, and initial dye concentration. Kinetic analyses revealed that the adsorption process of Safranin O dye mainly obeys pseudo-second-order kinetics, but intraparticle and film diffusion also contribute to the process. As a result of the Isotherm analysis, it was found that the adsorption process conformed to the Langmuir model. Testing on real textile wastewater samples demonstrated a removal efficiency of 75.09% under optimized conditions. Reusability experiments further revealed that the material maintained high adsorption–desorption performance for up to five cycles, emphasizing its potential for practical use. These findings suggest that m-ECH-RC is a viable and sustainable adsorbent for treating dye-laden industrial effluents.