Light-fidelity (LiFi) is a networked optical wireless communication (OWC) solution for high-speed indoor connectivity for fixed and mobile optical communications. Unlike conventional radio frequency wireless systems, the OWC channel is not isotropic, meaning that the device orientation affects the channel gain significantly, particularly for mobile users. However, due to the lack of a proper model for device orientation, many studies have assumed that the receiver is vertically upward and fixed. In this paper, a novel model for device orientation based on experimental measurements of forty participants has been proposed. It is shown that the probability density function (PDF) of the polar angle can be modeled either based on a Laplace (for static users) or a Gaussian (for mobile users) distribution. In addition, a closed-form expression is obtained for the PDF of the cosine of the incidence angle based on which the line-of-sight (LOS) channel gain is described in OWC channels. An approximation of this PDF based on the truncated Laplace is proposed and the accuracy of this approximation is confirmed by the Kolmogorov-Smirnov distance (KSD). Moreover, the statistics of the LOS channel gain are calculated and the random orientation of a user equipment (UE) is modeled as a random process. The influence of the random orientation on signal-to-noise-ratio (SNR) performance of OWC systems has been evaluated. Finally, an orientation-based random waypoint (ORWP) mobility model is proposed by considering the random orientation of the UE during the user’s movement. The performance of ORWP is assessed on the handover rate and it is shown that it is important to take the random orientation into account.

The increasing number of mobile devices challenges the current radio frequency (RF) networks, e.g. wireless fidelity (WiFi) networks. Light Fidelity (LiFi) is considered as a promising complementary technology, which operates within the visible light spectrum and infrared spectrum. In an indoor scenario, a hybrid LiFi/WiFi network (HLWN) provides a potential solution to future wireless communications where LiFi augments WiFi in providing ultra-high speed and low latency wireless connectivity. In this paper, dynamic load balancing (LB) with handover in HLWNs is studied. The orientation-based random waypoint (ORWP) mobility model is considered to provide a more realistic framework to evaluate the performance of HLWNs. Based on the low-pass filtering effect of the LiFi channel, we firstly propose an orthogonal frequency division multiplexing access (OFDMA)-based resource allocation (RA) method in LiFi systems. Also, an enhanced evolutionary game theory (EGT)-based LB scheme with handover in HLWNs is proposed. In the EGT scheme, each user adapts their strategy to improve the payoff until LB is achieved across LiFi and WiFi. Then, the LiFi system uses the proposed OFDMA-based RA method while the WiFi system applies the carrier sense multiple access with collision detection (CSMA/CA). Simulation results show that in the LiFi system the OFDMA-based RA scheme outperforms the time division multiple access (TDMA) scheme in terms of both user data rate and fairness. Regarding LB in HLWNs, the proposed EGT scheme can achieve a remarkable enhancement in throughput compared to benchmark schemes, such as hard threshold (HT) scheme and random access point assignment (RAA) scheme.

In this Letter, we propose and investigate a retroreflective optical integrated sensing and communication (RO-ISAC) system using orthogonal frequency division multiplexing (OFDM) and corner cube reflector (CCR). To accurately model the reflected sensing channel of the RO-ISAC system, both a point source model and an area source model are proposed according to the two main types of light sources that are widely used. Detailed theoretical and experimental results are presented to verify the accuracy of the proposed channel models and evaluate the communication and sensing performance of the considered RO-ISAC system.

The evolution of communication network architectures is steering towards more sustainable, flexible, and lightweight designs, particularly with the advent of sixth-generation (6G) mobile communications. Spectrum-rich optical integrated systems are anticipated to play a crucial role in this transformation, offering significant advantages such as high data rates, reduced interference, and improved energy efficiency. This paper introduces and experimentally demonstrates a novel optical integrated communication, sensing, and power transfer (O-ICSPT) system. The proposed system integrates optical wireless communication, sensing, and wireless power transfer into a multifunctional framework, addressing the limitations of existing systems in terms of flexibility and resource utilization. The experimental setup investigates the effects of bias current, peak-to-peak voltage, and light source wavelength on the performance of each functional module. Experimental results indicate that the O-ICSPT system achieves a maximum data rate of approximately 632.58 Mbps, a best ranging root mean square error approaching 0 m, and a peak energy harvesting capability of about 10.02 mW. These findings underscore the potential of the O-ICSPT system in future 6G integrated communication networks, marking the first experimental validation of such a system.

Visible light communications (VLC) and Millimetre wave (mmWave) systems are two emerging technologies for short-range mobile communications. One of the limiting factors of both VLC and mmWave systems is the random orientation of mobile devices that can significantly affect the channel gain in both systems. Since there is no proper model for device orientation, many studies have assumed that device orientation is fixed or modelled as a uniform distribution. To address this issue, an experimental study of mobile user behaviour is conducted and a statistical orientation model is proposed in this paper. The results show that the probability density function (PDF) of the elevation angle follows a Laplace distribution. Based on the statistical orientation model, Monte-Carlo simulations are carried out to analyse the system performance of VLC and mmWave systems. The statistics of signal-to-noise-ratio (SNR) are compared with the experiment-based simulation results in both VLC and mmWave systems.

Optical wireless communication (OWC) is considered to be a promising technology which will alleviate traffic burden caused by the increasing number of mobile devices. In this study, a novel vertical-cavity surface-emitting laser (VCSEL) array is proposed for indoor OWC systems. To activate the best beam for a mobile user, two beam activation methods are proposed for the system. The method based on a corner-cube retroreflector (CCR) provides very low latency and allows real-time activation for high-speed users. The other method uses the omnidirectional transmitter (ODTx). The ODTx can serve the purpose of uplink transmission and beam activation simultaneously. Moreover, systems with ODTx are very robust to the random orientation of a user equipment (UE). System level analyses are carried out for the proposed VCSEL array system. For a single user scenario, the probability density function (PDF) of the signal-to-noise ratio (SNR) for the central beam of the VCSEL array system can be approximated as a uniform distribution. In addition, the average data rate of the central beam and its upper bound are given analytically and verified by Monte-Carlo simulations. For a multi-user scenario, an analytical upper bound for the average data rate is given. The effects of the cell size and the full width at half maximum (FWHM) angle on the system performance are studied. The results show that the system with a FWHM angle of 4° outperforms the others.