17 January 2017 in IEEE Transactions on Communications
DBDushyantha A. Basnayaka
Light fidelity (LiFi) uses light emitting diodes (LEDs) for high-speed wireless communications. Since an LED lamp covers a small area, a LiFi system with multiple access points (APs) can offer a significantly high spatial throughput. However, the spatial distribution of data rates achieved by LiFi fluctuates because users experience inter-cell interference from neighboring LiFi APs. In order to guarantee a quality of service (QoS) for all users in the network, an RF network is considered as an additional wireless networking layer. This hybrid LiFi/RF network enables users with low levels of optical signals to achieve the desired QoS by migrating to the RF network. With regard to moving users, the hybrid LiFi/RF system dynamically allocates either a LiFi AP or an RF AP to users based on their channel state information. In this paper, a dynamic load balancing scheme is proposed, which considers the handover overhead in order to improve the overall system throughput. Joint optimization algorithm (JOA) and separate optimization algorithm (SOA), which jointly and separately optimize the AP assignment and resource allocation, respectively, are proposed. Simulation results show that SOA can offer a better performance/complexity tradeoff than JOA for system load balancing.
13 March 2017 in IEEE Transactions on Wireless Communications
Light Fidelity (LiFi) is a recently proposed technology that uses 300 THz visible light spectrum for high speed wireless communications as well as providing illumination. Basically, a LiFi access point (AP) covers only a few square meters, enabling a dense deployment of LiFi APs to improve the network throughput. However, channel blockage and shadowing in conjunction with inter-cell interference compromise the connectivity and system throughput of LiFi networks. In this paper, a network structure that combines LiFi with the conventional radio frequency (RF) system is considered. Users experiencing strong blockages can be switched to the RF system to achieve a higher data rate. In this paper, blockages, random orientation of LiFi receivers, and the user data rate requirement are characterised to model a practical communication scenario. A novel load balancing (LB) scheme based on evolutionary game theory is proposed for hybrid LiFi/RF networks. The performance of the proposed scheme is comprehensively analyzed. Results show that compared to state-of-the-art LB algorithms, the proposed scheme greatly improves user satisfaction levels at reduced computational complexity. Also, an optimal orientation of LiFi receivers and blockage density in hybrid networks would maximize the users quality of service.
17 February 2020 in IEEE Transactions on Communications
The increasing number of mobile devices challenges the current radio frequency (RF) networks, e.g. wireless fidelity (WiFi) networks. Light Fidelity (LiFi) is considered as a promising complementary technology, which operates within the visible light spectrum and infrared spectrum. In an indoor scenario, a hybrid LiFi/WiFi network (HLWN) provides a potential solution to future wireless communications where LiFi augments WiFi in providing ultra-high speed and low latency wireless connectivity. In this paper, dynamic load balancing (LB) with handover in HLWNs is studied. The orientation-based random waypoint (ORWP) mobility model is considered to provide a more realistic framework to evaluate the performance of HLWNs. Based on the low-pass filtering effect of the LiFi channel, we firstly propose an orthogonal frequency division multiplexing access (OFDMA)-based resource allocation (RA) method in LiFi systems. Also, an enhanced evolutionary game theory (EGT)-based LB scheme with handover in HLWNs is proposed. In the EGT scheme, each user adapts their strategy to improve the payoff until LB is achieved across LiFi and WiFi. Then, the LiFi system uses the proposed OFDMA-based RA method while the WiFi system applies the carrier sense multiple access with collision detection (CSMA/CA). Simulation results show that in the LiFi system the OFDMA-based RA scheme outperforms the time division multiple access (TDMA) scheme in terms of both user data rate and fairness. Regarding LB in HLWNs, the proposed EGT scheme can achieve a remarkable enhancement in throughput compared to benchmark schemes, such as hard threshold (HT) scheme and random access point assignment (RAA) scheme.
16 November 2017 in IEEE Journal on Selected Areas in Communications
Light fidelity (LiFi), using light devices like light emitting diodes (LEDs) and visible light spectrum between 400 THz and 800 THz, provides a new layer of wireless connectivity within existing heterogeneous radio frequency (RF) wireless networks. Link data rates of 10 Gbps from a single transmitter have been demonstrated under ideal lab conditions. Synchronization is one of these issues usually assumed to be ideal. However, in a practical deployment, this is no longer a valid assumption. Therefore, we propose for the first time a low-complexity maximum likelihood (ML) based timing synchronization process that includes frame detection and sampling clock synchronization for direct current biased optical orthogonal frequency division multiplexing (DCO-OFDM) LiFi systems. The proposed timing synchronization structure can reduce the highcomplexity two-dimensional search to two low-complexity onedimensional searches for frame detection and sampling clock synchronization. By employing a single training block, frame detection can be realized, and then sampling clock offset (SCO) and channels can be estimated jointly. We propose a number of three frame detection approaches, robust against the combined effects of both SCO and the low-pass characteristic of LEDs. Furthermore, we derive the Cramér-Rao lower bounds (CRBs) of SCO and channel estimations, respectively. In order to minimize the CRBs and improve synchronization performance, a single training block is designed based on the optimization of training sequences, the selection of training length and the selection of DC bias. Therefore, the designed training block allows us to analyze the trade-offs between estimation accuracy, spectral efficiency, energy efficiency, and complexity. The proposed timing synchronization mechanism demonstrates low-complexity and robustness benefits, and provides performance significantly better than existing methods.
29 October 2025 in Physical Review D
We compare LHCb measurements of J / ψ and ψ ( 2 S ) transverse-momentum distributions within jets with QCD calculations, which may be crucial in understanding the quarkonium production mechanism. Our theoretical calculations are based on the fragmenting jet function formalism, while the nonperturbative formation of quarkonia is described by the nonrelativistic QCD factorization formalism. We include the newest refinements in the perturbative calculation including resummation of threshold and Dokshitzer-Gribov-Lipatov-Altarelli-Parisi logarithms. We find that the ψ ( 2 S ) data have the potential to discriminate between the different production mechanisms proposed in the literature.
20 June 2022 in Journal of High Energy Physics
We present O(αs) analytic predictions for event shape 1-jettiness τ1 distribution aiming measurements in deep inelastic scattering process at future Electron Ion Colliders. The result depends on conventional variables x and Q as well as on τ1 and is relatively compact and easy to implement for numerical calculation. Three different choices of axis, with respect to which τ1 is measured are considered in the Breit frame. The first is the one optimally adjusted to minimize τ1 and the second and third are taken from anti-kT and Centauro jet algorithms defined with a jet radius parameter R, respectively. We find that the first and second give the same result at this order and are independent of R, while the third depends on the radius. This fixed-order result provides a nonsingular contribution to be combined with a singular log-resummed contribution to give the full spectrum in τ1 space and also shows how fixed-order and resummation regions change as a function of x and Q.