Petek kirişlerin kullanımı, çok yönlü mimari özellikleri nedeniyle son dönemde büyük ilgi görmektedir. Bu özellikler, farklı şekillerde boşluk içeren belirgin geometrik formları kapsamaktadır. Petek kirişler, artan eğilme mukavemeti sağlayarak hem ekonomik hem de çevresel açıdan faydalıdır; ayrıca, ağırlık artışı olmaksızın üretim teknikleri sayesinde kesit direncini artırmaktadır. Bu kirişler hastaneler, depolar, otoparklar, okullar ve alışveriş merkezleri gibi çeşitli yapılarda kullanılmaktadır. Bu çalışmada, altıgen boşluklu petek kirişlerin performansı S235, S255 ve S355 olmak üzere üç farklı malzeme kullanılarak optimize edilmiştir. Optimum kesit boyutları, düşey yer değiştirmeyi temsil eden bir amaç fonksiyonu yardımıyla belirlenmiştir. Optimizasyon için çiçek tozlaşması algoritması (FPA), ateş böceği algoritması (FA) ve yarasa algoritması (BA) olmak üzere üç farklı meta-sezgisel algoritma kullanılmıştır. Üç algoritmanın karşılaştırma sonuçları, ateş böceği ve çiçek tozlaşması algoritmalarının benzer sonuçlar verdiğini ve çiçek tozlaşması algoritmasının uygulama açısından en uygun algoritma olduğunu göstermiştir.
1 January 2025 in International Journal of Engineering Technologies IJET
Castellated beams have garnered increasing attention in various fields due to their aesthetically appealing design, diverse geometric shapes, environmental friendliness, and economic advantages in terms of time, cost, and performance. These beams particularly excel in resisting bending without increasing their weight. The novelty of this paper, is to optimize the performance of castellated beams by maximum vertical deflection, represented as the objective function. This is achieved by determining the optimal dimensions of the cross-section using three optimization algorithms: Gray Wolf Optimization (GWO), Particle Swarm Optimization (PSO), and Differential Evolution (DE). This study focuses on three different types of material for castellated beams: S235, S255, and S355. The results revealed that the PSO and DE algorithms produce very similar outcomes, while the GWO algorithm shows slightly different results. Overall, all three algorithms demonstrate good capability in engineering applications, with a slight preference for the PSO and DE algorithms.
Purpose: The purpose of this study is to introduce a novel hybrid algorithm by integrating features of the firefly (FA) algorithm and the flower pollination (FPA) algorithm to optimize the design of cellular beams. The hybrid algorithm was tested on beams of 300, 500, and 700 cm lengths under simply supported conditions, considering structural failure modes. Its performance was compared with three methods, showing clear superiority in obtaining optimal solutions across multiple independent runs. Design/methodology/approach: Individual metaheuristic algorithms often exhibit performance limitations when applied to diverse optimization problems. To overcome these limitations, a hybrid approach was developed, combining the strong global search capabilities of the FPA algorithm with the effective exploratory capabilities of the FA algorithm. The stability and efficiency of its performance were also assessed using multiple independent runs (50 runs) through sensitivity analyses, processing time, standard deviation and coefficient of variation (CV) and interquartile range (IQR). Its structural relevance was validated through an evaluation of its performance in determining the four basic cross-section dimensions. Findings: The results consistently showed superior solutions with improved stability and reduced cost, demonstrating its effectiveness in improving structural design with statistically significant improvements in solution stability. Originality/value: A new hybrid algorithm was developed and its efficiency was evaluated through comprehensive analyses and comparative benchmarking against both established metaheuristic algorithms. The hybrid algorithm demonstrated superiority supported by non-parametric statistical analysis over its parent algorithms, in addition to its superiority over the improved ray optimization (IRO) algorithm. This research presents a practical hybrid algorithm framework for solving complex structural design optimization problems while improving the quality of solutions, enhancing efficiency and reducing computational cost.
2 January 2026 in Mechanics Based Design of Structures and Machines
1. The effective depth increasing and enhancing flexural stiffness are among the key advantages of castellated beams, which have witnessed a remarkable expansion in engineering applications during ...
8 October 2026 in Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics
This study presents an analytical–numerical framework for the failure-guided assessment and design exploration of castellated beams with circular and hexagonal openings across six beam spans (300–800 cm). The framework uses five metaheuristic optimisation algorithms, applied individually and comparatively to these types of castellated beams within a unified design framework, with the objective of minimising construction cost while satisfying strength and serviceability constraints. The proposed framework simultaneously optimises the main cross-sectional parameters (bf, tf, tw, and dg) and investigates the relationship of these parameters to potential failure modes, complementing previous optimisation studies by explicitly linking cross-sectional decisions to the governing failure mechanisms for both opening types. The performance of the algorithms was evaluated using sensitivity analyses, processing time, standard deviation, and the coefficient of variation. Particular emphasis is placed on identifying the governing failure mechanisms associated with different optimised configurations. As an additional numerical check, finite element analysis was performed for selected critical and representative circular opening cases, including the weakest and strongest optimised configurations. This integration provides a practical framework that can be extended to other structural design problems.