Control of high-rise structures under seismic excitations was investigated using a passive hybrid control system consisting of a base-isolation (BI) subsystem and a passive tuned liquid column damper (TLCD) system. Both of the systems were optimized considering using the other system in the same structure. An optimization method was developed, and a computer code was written based on dynamic analysis of the structure and metaheuristic optimization methods. Within the scope of the study, a general solution was found by using many earthquake records during the optimization process. Moreover, one of the most suitable and successful metaheuristic algorithms was used in this study. In addition, numerical simulations were performed on a benchmark high-rise building structure to investigate the effectiveness of the optimized hybrid control system in controlling the seismic response of the building. The performance of the base-isolated TLCD-controlled structure was examined when the TLCD was placed on the base floor by using a set of 44 recorded ground motions as base excitations. Based on the results obtained from this study, the use of a base-isolation subsystem decoupling the superstructure from the ground motions by lowering the structure’s fundamental natural frequency reduces the structural responses of the building in most cases. The responses of the base-isolation subsystem were not too large since the parameters of the BI subsystem were optimized specifically for the investigated structure. Nevertheless, displacements of BI might exceed the maximum limit to undesirable values in some cases. The TLCD system appears to be quite effective in protecting the base-isolation subsystem by reducing its displacements to the maximum allowable limit or below when attached to it. Moreover, the proposed passive hybrid control system can effectively reduce the structural responses under seismic excitations.
Castellated beams have garnered increasing attention in various fields due to their aesthetically appealing design, diverse geometric shapes, environmental friendliness, and economic advantages in terms of time, cost, and performance. These beams particularly excel in resisting bending without increasing their weight. The novelty of this paper, is to optimize the performance of castellated beams by maximum vertical deflection, represented as the objective function. This is achieved by determining the optimal dimensions of the cross-section using three optimization algorithms: Gray Wolf Optimization (GWO), Particle Swarm Optimization (PSO), and Differential Evolution (DE). This study focuses on three different types of material for castellated beams: S235, S255, and S355. The results revealed that the PSO and DE algorithms produce very similar outcomes, while the GWO algorithm shows slightly different results. Overall, all three algorithms demonstrate good capability in engineering applications, with a slight preference for the PSO and DE algorithms.
In the context of this study, it is focused on the design of cantilever soldier piles under the concept of Pareto optimality with multiobjective analyses of cost and CO2 emission considering the change in the excavation depth, the shear strength parameters of the foundation soil strata, and the unit costs and unit emission amounts of structural materials. Considering this aim, the harmony search algorithm was used as a tool to achieve the integrated effects of the solution variants. The lateral response of the soil mass was determined based on the active Rankine earth pressure theory and the design process was shaped according to the beams on the elastic foundation soil assumption. Moreover, the specification envisaged by the American Concrete Institute (ACI 318-11) was used to control the structural requirements of the design. Pareto front graphs and also design charts were created to achieve the eco- and cost optimization, simultaneously, for the design with arbitrarily selected cases to compare the results of the multiobjective analysis to minimize both the cost and the CO2 emission.
This study presents a hybrid approach integrating metaheuristic optimization and machine learning methods to quickly and reliably estimate the optimum design parameters of dome-shaped axially symmetric cylindrical reinforced concrete (RC) walls. A comprehensive dataset was created using the Jaya algorithm to minimize total material cost for hinged and fixed support conditions. For each optimized design case, total wall height (H), dome height (Hd), dome thickness (hd), and fluid unit weight (γ) were considered as input parameters; optimum wall thickness (hw) and total cost were determined as output parameters. Using the obtained dataset, a total of thirteen different regression-based machine learning algorithms, including linear regression-based models, tree-based ensemble methods, and neural network models, were trained and tested. Hyperparameter adjustments for all models were performed using the Optuna framework, and model performances were evaluated using a ten-fold cross-validation method and holdout dataset results. The results showed that machine learning models can learn the optimum design space obtained from metaheuristic optimization outputs with high accuracy. In optimum wall thickness estimation, Gradient Boosting-based models provided the highest accuracy under both hinged and fixed support conditions. In total cost estimation, the Gradient Boosting model stood out under hinged support conditions, while the XGBoost model yielded the most successful results for fixed support conditions. The findings clearly show that no single machine learning model exhibits the best performance for all output parameters and support conditions. The proposed approach offers significantly higher computational efficiency compared to traditional iterative optimization processes and allows for rapid estimation of optimum design parameters without the need for any iterations. In this respect, this study provides an effective decision support tool that can be used especially in the preliminary design phases and contributes to sustainable, cost-effective reinforced concrete structure design.