In this study, the fractal dimensions of failure surfaces of vinyl ester based nanocomposites are estimated using two classical methods, Vertical Section Method (VSM) and Slit Island Method (SIM), based on the processing of 3D digital microscopic images. Self-affine fractal geometry has been observed in the experimentally obtained failure surfaces of graphite platelet reinforced nanocomposites subjected to quasi-static uniaxial tensile and low velocity punch-shear loading. Fracture energy and fracture toughness are estimated analytically from the surface fractal dimensionality. Sensitivity studies show an exponential dependency of fracture energy and fracture toughness on the fractal dimensionality. Contribution of fracture energy to the total energy absorption of these nanoparticle reinforced composites is demonstrated. For the graphite platelet reinforced nanocomposites investigated, surface fractal analysis has depicted the probable ductile or brittle fracture propagation mechanism, depending upon the rate of loading.
1 January 2014 in Advances in Materials Science and Engineering
In previous research, the fractal dimensions of fractured surfaces of vinyl ester based nanocomposites were estimated applying classical method on 3D digital microscopic images. The fracture energy and fracture toughness were obtained from fractal dimensions. A noteworthy observation, the strain rate dependent ductile-to-brittle transition of vinyl ester based nanocomposites, is reinvestigated in the current study. The candidate materials of xGnP (exfoliated graphite nanoplatelets) reinforced and with additional CTBN (Carboxyl Terminated Butadiene Nitrile) toughened vinyl ester based nanocomposites that are subjected to both quasi-static and high strain rate indirect tensile load using the traditional Brazilian test method. High-strain rate indirect tensile testing is performed with a modified Split-Hopkinson Pressure Bar (SHPB). Pristine vinyl ester shows ductile deformation under quasi-static loading and brittle failure when subjected to high-strain rate loading. This observation reconfirms the previous research findings on strain rate dependent ductile-to-brittle transition of this material system. Investigation of both quasi-static and dynamic indirect tensile test responses show the strain rate effect on the tensile strength and energy absorbing capacity of the candidate materials. Contribution of nanoreinforcement to the tensile properties is reported in this paper.
Self-healing materials are repairable and extend product lifetimes but are limited in application due to their mechanical properties such as low yield strength. Here, we examined the dynamic mechanical performance of an elastomeric polymer composite containing aramid nanofibers. These studies provided an economically feasible foundation to understand the reinforcement concentration and resultant mechanical properties that would result should aramid nanofibers be used to reinforce a self-healing polymer that requires complex synthesis methods and expensive reactants. The elastomeric polymer used was polycaprolactone containing various weight percent aramid nanofibers. Dynamic mechanical testing of these samples was performed using a split-Hopkinson pressure bar system that enabled quantification of polymer softening and aramid nanofiber reinforcement. Dynamic flow stress and strain rates were also calculated with these data. Crystallinity and thermal softening effects of solvent dissolution of polycaprolactone are explored to further characterize the performance of aramid nanofibers as a fiber in composite materials. Graphical abstract
Focus of our research is on developing stronger, safer and more cost-effective structures for the new generation naval ships; especially nanoparticle reinforced glass/carbon polymeric based composites and structural foams for blast/shock/impact mitigation. Punch-shear test at low velocity impact is significant for mechanical characterization. Gama et al. [1] performed QS-PST experimental methodology to define elastic energy and absorbed energies of composites as a function of penetration displacement. This paper describes the punch-shear response of nanoparticle reinforced vinyl ester plates, laminated face sheets and sandwich composites using Dynatup 8250 drop-weight impact test system according to ASTM D3763 Standard [2]. Low-velocity tests were performed on 4″ × 4″ square plate specimens with fixed circular boundary condition and impacted by a hemispherical-head plunger with added mass. The impact load, displacement, energy plots and visual inspection of the post damaged specimens depicted the failure characteristics and punch shear response of these composites.