The main limitation of magnetic gears is their relatively low torque density. Therefore, a novel structured high torque density magnetic-geared permanent magnet (MGPM) machine, which combines the advantages of a conventional MGPM machine and magnetic gear to enhance the torque considerably and achieve low-speed high-torque operation, is proposed in this study. However, there are different structures for increasing torque of a machine. Therefore, in order to demonstrate the advantages of the proposed structure, it is compared with other structures, using the finite element method. Moreover, the proposed MGPM machine can transmit an additional 42.3% of torque density when compared with the conventional MGPM machine of the same size.
This paper proposes a solution to enhance the torque production capability of Permanent Magnet Synchronous Machine (PMSM), utilizing not only the unused space resulting from the stator end windings on the rotor side, but also the otherwise unused space around the winding on the yoke side. By implementing an additional axial rotor equipped with Permanent Magnets (PMs) in both rotor and yoke sides, the proposed design technique increases the PMSM torque output, taking advantage of the useless space on the yoke side. In the proposed configuration, one magnetic flux path circulates between the PMs on the rotor (rotor side) and the stator, while an additional flux path circulates between the PMs positioned on both sides of the stator end windings. These two flux paths contribute to generating a stronger and more effective magnetic field within the machine than conventional structure, resulting in increased torque density. A magnetic equivalent circuit (MEC) model of the proposed design is developed, and its accuracy is validated through Finite Element (FE) analysis. For a fair evaluation, the proposed structure is compared with a conventional configuration using the same volume of PM material. Furthermore, optimization of the proposed design is carried out to maximize Torque/PM.
In order to increase the torque of the permanent magnet synchronous machine (PMSM), this paper proposes a novel strategy focusing on the new concept of an additional rotor—referred to as the axial rotor—to effectively utilize the space in PMSMs with distributed windings while preserving the conventional stator slot geometry and winding configuration. Unlike the main radial rotor, which employs radially magnetized permanent magnets (PMs), the proposed axial rotor-based technique uses axially magnetized PMs to highly enhance the magnetic field within the air gap, leading to increased torque output as well as well-suited for transportation applications for transportation sector applications. Moreover, this paper develops a magnetic equivalent circuit (MEC) model so as to facilitate faster design iterations and reduce computational effort as well. The accuracy of the proposed model is validated through Finite Element (FE) analysis and also the proposed design strategy is compared with other configurations. Experimental results further validate the effectiveness of the proposed structure.
17 April 2026 in IEEE Open Journal of Industry Applications
This paper proposes a structural approach to leverage the unused space created by the stator's end winding, with the goal of enhancing the machine's torque. To accomplish this, Permanent Magnets (PMs) are extended beyond the active stack, forming an overhang structure that boosts stator flux linkage and enhances torque delivery. This enables the design of a smaller motor that delivers the same torque output, offering a higher torque/power density. The proposed structure is also optimized and compared with alternative designs under the constraint of equal magnet volume to highlight its effectiveness. Furthermore, a Magnetic Equivalent Circuit (MEC) model of the proposed structure is developed and validated using Finite Element (FE) analysis. Experimental validation is also conducted, and the results are compared with the conventional overhang configuration.
1 March 2024 in IAES International Journal of Robotics and Automation (IJRA)
Variable-speed constant-frequency generating systems are commonly employed in wind turbines to enhance efficiency and minimize losses. Additionally, the utilization of dual-rotor wind turbines enables the capture of a greater amount of wind energy, leading to a significant increase in efficiency. Traditionally, dual-rotor wind turbines are managed by a full-scale power converter, and the rotor current is transmitted through brushes, which substantially raises the system's cost. To address these challenges, this study introduces a novel configuration that enables power control with a smaller power converter. In contrast to conventional dual-rotor wind turbines that generate power using both rotors, the proposed structure designates one rotor as a system controller. Apart from these benefits, the proposed structure greatly enhances conversion performance by notably improving the power factor. A comparison with existing configurations described in literature is conducted to demonstrate the superiority of the proposed structure.