We propose a hybrid acoustic metamaterial as a super absorber for a relatively broadband low-frequency sound based on a simple construction with deep-subwavelength thickness (5 cm). The hybrid metamaterial absorber is carefully designed and constructed based on a microperforated panel (MPP) and coiled-up Fabry–Pérot channels. It is demonstrated analytically, numerically, and experimentally that over 99% of acoustic absorption could be achieved at a resonance frequency (<500 Hz) with the working wavelength about 30 times larger than its total thickness. It is revealed that the superior absorption is mainly caused by the friction losses of acoustic wave energy in the MPP. The frequency of the absorption peak could be tuned by adjusting the geometry parameters of the MPP and the channel folding numbers. The relative absorption bandwidth could also be tuned flexibly (up to 82%) with a fixed deep-subwavelength thickness (5 cm). The absorber has wide potential applications in noise control engineering due to its deep-subwavelength thickness, relatively broad bandwidth, and easy fabrication.
This paper presents a theoretical, numerical, and experimental investigation of a deep-subwavelength absorber based on the concept of coiled-up space. By adjusting a partition panel in the cavity to form an unequal-section channel, it is found that the resonance frequency of the absorber is easily tuned and near-total absorption is acquired under a fixed deep-subwavelength thickness. The absorption mechanism induced by nearly critical coupling is revealed by graphically analyzing the reflection coefficient in the complex plane. In contrast to conventional techniques, near-total absorption can be adjusted over a wider frequency range. To further enhance the absorption, we demonstrate a broadband absorber with a relative bandwidth up to 33.3%.
20 April 2021 in Journal of Physics D: Applied Physics
This paper discusses the design of structured materials for broadband waterborne sound absorption. The structured materials are composed of a rubber matrix embedded periodically with cavities. To find the optimal distribution of cavities, an inverse design method based on topology optimization is proposed. Structured materials with novel hybrid cavities are thus designed. Efficient absorption over a wide frequency range between 600 Hz and 8000 Hz is achieved. The underlying mechanism behind the broadband absorption performance is revealed. Both the bending motion of the structured material and the translational motion of its steel backing affect the absorption in the low-frequency regime. Coherent coupling of local resonant modes together with the multiple scattering effects among cavities contribute to sound absorption in the mid-to-high frequency range. Moreover, a comparison with a conventionally structured material demonstrates the advantages of our design. Finally, an inverse design process with a different rubber matrix is performed. The results show that these cavities still exhibit similar topological features when the shear wave velocity of the rubber matrix is varied.
Effective absorption of low-frequency waterborne sound with subwavelength absorbers has always been a challenging work. In this paper, we derive two theoretical requirements for broadband perfect absorption of low-frequency waterborne sound by ultrathin acoustic metasurface under a finite-thickness steel plate followed by semi-infinite air. Based on the theoretical requirements, an acoustic metasurface, a rubber layer embedded periodically with cavities, is inversely designed to achieve perfect absorption at 500 Hz. The metasurface is as thin as 1% of the working wavelength and maintains a substantially high absorptance over a relatively broad bandwidth. The perfect absorption peak is attributed to the overall resonance mode of the metasurface/steel plate system. Besides, high absorption can still be achieved even if the loss factor of the given rubber material cannot meet the ideal requirement. Finally, a strategy to utilize the inherent frequency-dependent characteristics of dynamic parameters of rubber material is suggested to achieve an ultra-broadband perfect absorption. When the frequency-dependent characteristics of the given rubber matrix cannot meet the theoretical requirements, a broadband super-absorption can still be realized by properly designing the frequency position of perfect absorption of the cavity-based metasurface.
A new hybrid-mechanism metastructure combined resonances of locally resonant scatterers and air cavities is proposed for broadband waterborne sound absorption. In the design, the locally resonant scatterers are embedded into the backing plate of a rubber layer with air cavities. The results demonstrate significant absorption improvement in the low-frequency range using the locally resonant scatterers. Cavities of mixed sizes and locally resonant scatterers of mixed types can be used to achieve efficient absorption over an ultrawide band. This broadband absorption is found to be attributed to the hybrid-mechanism of the resonances of the cavities and the locally resonant scatterers. Furthermore, the absorption mechanism is illustrated by the displacement patterns, the absorption contribution decomposition analysis, and the effective medium theory.