This paper discusses the design of structured materials for broadband waterborne sound absorption. The structured materials are composed of a rubber matrix embedded periodically with cavities. To find the optimal distribution of cavities, an inverse design method based on topology optimization is proposed. Structured materials with novel hybrid cavities are thus designed. Efficient absorption over a wide frequency range between 600 Hz and 8000 Hz is achieved. The underlying mechanism behind the broadband absorption performance is revealed. Both the bending motion of the structured material and the translational motion of its steel backing affect the absorption in the low-frequency regime. Coherent coupling of local resonant modes together with the multiple scattering effects among cavities contribute to sound absorption in the mid-to-high frequency range. Moreover, a comparison with a conventionally structured material demonstrates the advantages of our design. Finally, an inverse design process with a different rubber matrix is performed. The results show that these cavities still exhibit similar topological features when the shear wave velocity of the rubber matrix is varied.
Elastic metamaterials have been widely applied in elastic wave manipulation. Nevertheless, their performance is inherently restricted by two intrinsic coupling mechanisms: the modulus and density follow a power-law scaling relationship under static conditions, and the wave velocity is positively correlated with the modulus under dynamic conditions. To overcome these limitations, this study proposes a type of elastic metamaterial based on 3D-printed polymers, namely mass-loaded metamaterial (MLM). The structure is constructed by embedding discrete mass blocks into a lattice frame. The proposed design realizes the dual decoupling of modulus from density and wave velocity. The elastic modulus of the structure can be maximally increased by 307% while keeping the wave velocity constant; additionally, a 35% reduction in wave velocity can be achieved without deteriorating the elastic modulus. This distinctive decoupling effect possesses great application value in the field of underwater sound absorption. The structure can simultaneously exhibit high modulus and low wave velocity characteristics, which improves sound absorption performance and guarantees mechanical stability under high hydrostatic pressure.
1 June 2026 in Journal of Physics: Conference Series
Conventional honeycomb metamaterials regulate sound velocity through equivalent modulus (Young’s modulus), where a higher modulus leads to a higher sound velocity. While this mechanism is effective under static or quasi-static conditions, it limits the ability to manipulate elastic waves in broadband or dynamic scenarios. To overcome this limitation, this paper proposes a locally mass-attached honeycomb metamaterial that enables independent regulation of sound velocity and equivalent modulus. By attaching masses at the corners and center of the unit cell, the relationships among modulus, density, and sound velocity are investigated. The results show that corner-attached masses alter the sound velocity–density relationship without affecting the modulus–density trend, whereas center-attached masses reduce sound velocity with increasing density while keeping the modulus nearly unchanged. This provides a new degree of freedom for elastic wave manipulation. Applying the center-mass configuration to underwater sound absorption, the optimized structure achieves an average absorption coefficient of 0.885 in the frequency range of 400 Hz to 5000 Hz, enabling low-frequency broadband absorption. Compression simulations further reveal a maximum compressive strength of 4.6 MPa, confirming good load-bearing capacity. This study offers an effective approach for regulating sound velocity and equivalent modulus in honeycomb metamaterials, opening new pathways for multifunctional acoustic structures.