Polyoxazoline thin coatings were deposited on glass substrates using atmospheric pressure plasma polymerization from 2-ethyl-2-oxazoline vapours. The plasma polymerization was performed in dielectric barrier discharge burning in nitrogen at atmospheric pressure. The thin films stable in aqueous environments were obtained at the deposition with increased substrate temperature, which was changed from 20 C to 150 C. The thin film deposited samples were highly active against both S. aureus and E. coli strains in general. The chemical composition of polyoxazoline films was studied by FTIR and XPS, the mechanical properties of films were studied by depth sensing indentation technique and by scratch tests. The film surface properties were studied by AFM and by surface energy measurement. After tuning the deposition parameters (i.e., monomer flow rate and substrate temperature), stable films, which resist bacterial biofilm formation and have cell-repellent properties, were achieved. Such antibiofouling polyoxazoline thin films can have many potential biomedical applications.
Polyoxazolines are a new promising class of polymers for biomedical applications. Antibiofouling polyoxazoline coatings can suppress bacterial colonization of medical devices, which can cause infections to patients. However, the creation of oxazoline-based films using conventional methods is difficult. This study presents a new way to produce plasma polymerized oxazoline-based films with antibiofouling properties and good biocompatibility. The films were created via plasma deposition from 2-methyl-2-oxazoline vapors in nitrogen atmospheric pressure dielectric barrier discharge. Diverse film properties were achieved by increasing the substrate temperature at the deposition. The physical and chemical properties of plasma polymerized polyoxazoline films were studied by SEM, EDX, FTIR, AFM, depth-sensing indentation technique, and surface energy measurement. After tuning of the deposition parameters, films with a capacity to resist bacterial biofilm formation were achieved. Deposited films also promote cell viability.
Poly(2-oxazoline) is a promising new class of polymeric materials due to their antibiofouling properties and good biocompatibility. Poly(2-oxazoline) coatings can be deposited on different substrates via plasma polymerization, which can be more advantageous than other coating methods. The aim of this study is to deposit poly(2-oxazoline) coatings using a surface dielectric barrier discharge burning in nitrogen at atmospheric pressure using 2-methyl-2-oxazoline and 2-ethyl-2-oxazoline vapours as monomers and compare the film properties. For the comparison, the antibacterial and cytocompatibility tests were peformed according to ISO norms. The antibacterial tests showed that all the deposited films were highly active against Staphylococcus aureus and Escherichia coli bacteria. The chemical composition of the films was studied using FTIR and XPS, and the film surface’s properties were studied using AFM and surface energy measurement. The cytocompatibility tests showed good cytocompatibility of all the deposited films. However, the films deposited from 2-methyl-2-oxazoline exhibit better cytocompatibility. This difference can be explained by the different chemical compositions and surface morphologies of the films deposited from different monomers.
Antibacterial coatings on biomedical instruments are of great interest because they can suppress bacterial colonization on these instruments. In this study, antibacterial polymeric thin coatings were deposited on teflon substrates using atmospheric pressure plasma polymerization from a propane–butane mixture. The plasma polymerization was performed by means of surface dielectric barrier discharge burning in nitrogen at atmospheric pressure. The chemical composition of plasma polymerized propane–butane films was studied by energy-dispersive X-ray spectroscopy (EDX) and FTIR. The film surface properties were studied by SEM and by surface energy measurement. The EDX analysis showed that the films consisted of carbon, nitrogen and oxygen from ambient air. The FTIR analysis confirmed, in particular, the presence of alkyl, nitrile, acetylene, imide and amine groups. The deposited films were hydrophilic with a water contact angle in the range of 13–23°. The thin film deposited samples were highly active against both S. aureus and E. coli strains in general. On the other hand, the films were cytocompatible, reaching more than 80% of the cell viability threshold compared to reference polystyrene tissue.
Práce přináší výsledky první geochemické analýzy provedené na pravěkých obsidiánových artefaktech z území Čech. Ke studiu bylo vybráno jedenáct vzorků s důvěryhodným datačním kontextem. Převážnou většinu analyzovaných vzorků je možné zařadit do období neolitu. Artefakty byly analyzovány dvěma nedestruktivními geochemickými metodami: hodnoty koncentrací zjištěné metodou pXRF byly kalibrovány pomocí výsledků LA-ICP-MS. Na základě výsledků je možné devět vzorků přiřadit s největší pravděpodobností slovenskému zdroji, surovina dvou vzorků pochází pravděpodobně z maďarských zdrojů. štípaná industrie-obsidián-Čechy-neolit-mladý paleolit-geochemie-provenience The origin of obsidian in prehistoric Bohemia. The paper presents the results of the first geochemical analysis conducted on prehistoric obsidian artefacts from Bohemia. Eleven samples from reliably dated contexts were chosen for the study. The vast majority of the analysed samples can be classified into the Neolithic period. The artefacts were analysed using two non-destructive geochemical methods: concentration values determined by portable X-ray fluorescence spectroscopy (pXRF) were calibrated using the results of laser ablation inductively coupled mass spectrometry (LA-ICP-MS). Based on the results, the origin of nine samples can, with the greatest degree of probability, be traced to Slovakia, the other two to Hungary.
Mass spectrometric analysis of inorganic materials is widely used. However, no major advances were made in this area compared to the significant progress in the analysis of biological materials. This work introduces a novel open-source R workflow that efficiently processes and models isotopic distributions in LDI-TOF MS analysis. Furthermore, it facilitates the comparison of model isotopic envelopes with experimental data and the selection of appropriate models that reveal the composition of complex experimental mass spectra. It overcomes the limitations of commercial software and opens new possibilities for the analysis of novel industrial materials.