A sub-cooled liquid nitrogen system is known to be a promising method to develop a high voltage superconducting magnet. Therefore, the investigation of dielectric characteristics of gaseous electrical insulation media is important for the design of a high voltage superconducting apparatus. In this paper, dielectric characteristics of various gases according to utilization factors are investigated for the establishment of insulation design criteria of a high voltage superconducting apparatus. Dielectric experiments on gaseous nitrogen and gaseous helium (GHe) are carried out by using several kinds of sphere-to-plane electrode systems made of stainless steel. As a result, it is found that the dielectric characteristics of gas are determined by as well as gap length of electrode systems. Also, empirical expressions for electrical breakdown performance of gaseous electrical insulation media are derived and formulated. It is considered that the results of the study would be applicable to designing a high voltage superconducting apparatus.
23 July 2007 in IEEE Transactions on Applied Superconductivity
Dielectric characteristics of gaseous helium (GHe) injected into the cooling system to make sub-cooled nitrogen condition with constant pressure is found to be extraordinarily weak in dielectric strength by H. Mitsuii (1998). In high voltage superconducting machines using the sub-cooled nitrogen cooling system, the current lead part in GHe environment could be electrical weak points rather than the superconducting magnet part in liquid nitrogen (LN2). In order to enhance dielectric characteristics of current lead part, three methods are suggested in this paper. The first one is enclosing the current leads with solid dielectric material and the second is exposing the current leads to high vacuum, and the last is topping up the magnet system with dielectric materials such as Glass Bubbles (GB) which is usually used as heat insulator. In addition, the extinction time of bubbles caused by the electrical breakdown is measured to determine the suitable pressure of sub-cooled nitrogen system. It is found that the characteristics of bubble extinction in LN2 are drastically enhanced over 1 bar.
10 February 2011 in IEEE Transactions on Applied Superconductivity
A sub-cooled liquid nitrogen (LN2) cooling system is known as an appropriate method for developing a high voltage superconducting fault current limiter (SFCL). The pressure of a sub-cooled LN2 cooling system should be controlled by injecting non-condensable gas such as gaseous helium (GHe) and gaseous neon (GNe) into the cryostat. Therefore, the electrical breakdown voltage of current leads is directly influenced by an injected gaseous medium. In this study, electrical insulation experiments on GHe and GNe are conducted and the results are compared with each other. Also, the dielectric characteristics of GHe and GNe are analyzed by using field utilization factors. It is found that the dielectric characteristics of GHe are superior to those of GNe under the same conditions. The experimental results are applicable for designing the current leads of a high voltage superconducting fault current limiter.
5 June 2009 in IEEE Transactions on Applied Superconductivity
YBCO coated conductors (CC) have actively been researched and manufactured these days. Recently, stabilizer-free (SF) CC with Hastelloy substrate has been developed for superconducting fault current limiter (SFCL). The SF CC has higher resistivity than other existing CCs with thick metallic stabilizer. Higher voltage per unit length applicable can be increased. In this research, the bifilar pancake coil using SF CC was manufactured and characteristic tests of the coil for SFCL were performed. Though the bifilar coil is supposed to have no inductance during normal operation, the transport current loss is be produced due to AC current flowing through the SF CC. AC loss was measured and short-circuit test was performed in liquid nitrogen. In order to develop large scale SFCL, it is indispensable to consider the dielectric characteristics of pancake module. Dielectric breakdown tests were carried out to find applicable maximum voltage in one pancake module. These results provided to suitable design parameters and showed technical feasibility of pancake type module as an SFCL.
9 January 2013 in IEEE Transactions on Applied Superconductivity
In the Republic of Korea, it is widely thought that the subcooled liquid nitrogen cooling system is the most promising method to develop a high-voltage superconducting apparatus. This method involves injecting a gaseous insulation medium, such as He, Ne, or N2, into the superconducting apparatus to control the system pressure [1]. Therefore, a study on the dielectric characteristics of gaseous and solid insulation materials must be conducted to design the current lead parts for a high-voltage superconducting apparatus, such as a superconducting fault current limiter, superconducting cable, and superconducting transformer with a subcooled liquid nitrogen cooling system. In this paper, a study on the electrical breakdown characteristics of gaseous insulation materials is conducted to estimate the thickness of the gaseous layer between the current lead and the metallic enclosure. An analysis on the dielectric characteristics of the GFRP (glass fiber reinforced plastic) is performed to determine the thickness of the GFRP sheath for a current lead. It is found that the electric field intensity of the gaseous insulation media at flashover can be represented as the function of field utilization factors at various pressures: 0.1, 0.2, 0.3, and 0.4 MPa. Also, it is revealed that the electric field intensity at sparkover with an electrical breakdown of the GFRP can be represented as a constant value regardless of system pressure, and a field utilization factor under the conditions of quasi-uniform electric fields. All dielectric experiments are conducted under liquid nitrogen at a temperature of 77 K. The conceptual insulation design of condenser-type current leads for a 22.9 kV and a 154 kV superconducting apparatus is undertaken.