Perovskite solar cells (PSCs) are next-generation solar cells; they are replacing silicon-based solar cells due to their higher efficiency, greater cost-effectiveness, and enhanced potential for various applications. Exceeding the efficiency of crystalline silicon-based solar cells, the commercialization of PSCs has driven not only the development of perovskite photoactive materials but also charge transport layer advancements, interfacial engineering, and processing technologies. PSCs were developed later than dye-sensitized solar cells and organic solar cells; the adoption of techniques previously employed in these technologies is significant to enhancing their performance. Among them, polymers are widely employed in perovskite solar cells to facilitate efficient charge transport, provide interfacial passivation, enhance mechanical flexibility, enable solution-based processing, and improve environmental stability. In this review, we highlight the roles of polymer materials as charge transport layers, interfacial layers, and other functional layers for highly efficient and stable PSCs.
Organic solar cells (OSCs) and perovskite solar cells (PSCs) are emerging photovoltaic technologies owing to their high efficiency, low-cost processing, and diverse applications ranging from utility-scale power generation to small-scale electronics. A key advantage of OSCs and PSCs over traditional silicon-based solar cells is their solution-processability, which enables fabrication via cost-effective scalable printing technologies suitable for commercialization. In addition to organic and perovskite photoactive layers, other functional layers, including interfacial layers and electron and hole transport layers, can also be processed using solution-based printing techniques. However, the conventional architecture of these emerging photovoltaics relies on vacuum-based deposition processes for both oxide-based electrodes (e.g., indium tin oxide and fluorine tin oxide) and metallic top electrodes (e.g., Au, Ag, Cu, and Al), which contrasts with printing-based processing. The implementation of printing technologies for electrode fabrication is necessary to achieve low-cost production and flexible photovoltaic applications. Herein, we review printed electrodes—including metal electrodes, conductive polymers, and carbon-based materials—used to fabricate OSCs and PSCs.