The fabrication of organic photovoltaic modules via printing techniques has been the greatest challenge for their commercial manufacture. Current module architecture, which is based on a monolithic geometry consisting of serially interconnecting stripe-patterned subcells with finite widths, requires highly sophisticated patterning processes that significantly increase the complexity of printing production lines and cause serious reductions in module efficiency due to so-called aperture loss in series connection regions. Herein we demonstrate an innovative module structure that can simultaneously reduce both patterning processes and aperture loss. By using a charge recombination feature that occurs at contacts between electron- and hole-transport layers, we devise a series connection method that facilitates module fabrication without patterning the charge transport layers. With the successive deposition of component layers using slot-die and doctor-blade printing techniques, we achieve a high module efficiency reaching 7.5% with area of 4.15 cm2.
Realizing industrial-scale, large-area photovoltaic modules without any considerable performance losses compared with the performance of laboratory-scale, small-area perovskite solar cells (PSCs) has been a challenge for practical applications of PSCs. Highly sophisticated patterning processes for achieving series connections, typically fabricated using printing or laser-scribing techniques, cause unexpected efficiency drops and require complicated manufacturing processes. We successfully fabricated high-efficiency, large-area PSC modules using a new electrochemical patterning process. The intrinsic ion-conducting features of perovskites enabled us to create metal-filamentary nanoelectrodes to facilitate the monolithic serial interconnections of PSC modules. By fabricating planar-type PSC modules through low-temperature annealing and all-solution processing, we demonstrated a notably high module efficiency of 14.0% for a total area of 9.06 cm2 with a high geometric fill factor of 94.1%.
This review article discusses prominent patterning methods and module architectures for the scalable fabrication of organic and perovskite solar cell modules.
Recently, emerging third-generation photovoltaic technologies have shown rapid progress in device performance; the power conversion efficiencies (PCEs) of organic bulk heterojunction (BHJ) and perovskite solar cells (PSCs) are now surpassing 19% and 25%, respectively. Despite this dramatic enhancement, their efficiencies are theoretically limited based on the detailed balance model which accounts for inevitable loss mechanisms under operational conditions. Integrated solar cells, formed by monolithically integrating two photoactive layers of perovskite and BHJ with complementary absorption, provide a promising platform for further improvement in solar cell efficiency. In perovskite/BHJ integrated solar cells (POISCs), high bandgap perovskite offers high open-circuit voltage with minimal losses while low bandgap organic BHJ extends absorption bandwidth by covering the near-infrared region, resulting in additional photocurrent gain. Different from conventional tandem solar cells, integrated solar cells contain merged photoactive layers without the need for complicated recombination layers, which greatly simplifies fabrication processes. In this review, we summarize the recent progress in POISCs, including operational mechanism and structural development, and remaining challenges on the road toward efficient devices.
29 November 2024 in Journal of Materials Chemistry A
A plasma-modified ALD (PMALD) approach has been developed for depositing SnOx thin-films with a tunable composition as electron extraction layers in perovskite solar modules using poly(triarylamine) (PTAA) as the hole transport layer.
16 July 2024 in Journal of Materials Research and Technology