Diagnosing the density profile at the edge of high temperature fusion plasmas by an accelerated lithium beam is a known technique since decades. By knowledge of the relevant atomic physics rate coefficients, the plasma electron density profile can be calculated from the relatively calibrated light profile along the beam. Several additional possibilities have already been demonstrated: Charge Exchange Resonance Spectroscopy (CXRS) for ion temperature/flow and Zeeman polarimetry for edge plasma current; therefore the Li-beam diagnostic offers a wealth of information at the plasma edge. The weaknesses of the method are the relatively faint light signal, background light, and technical difficulties of the beam injector which usually seriously limit the applicability. In this talk, we present systematic developments in alkali-beam diagnostics (Li, Na) for the injector and the observation system and detectors which resulted in strongly increased capabilities. Advanced systems have been built, and microsecond scale density profile, turbulence, and zonal flow measurement have been demonstrated. A novel edge current measurement technique has also been designed, and components have been tested with potential microsecond-scale time resolution. Additional possibilities of these advanced systems for spectral measurements (CXRS and various Zeeman schemes) are also discussed.
21 June 2019 in Plasma Physics and Controlled Fusion
Recently the Lithium-Beam Emission Spectroscopy (Li-BES) system on COMPASS has reached its full diagnostic power in terms of routine automatic operation in any kind of plasma scenarios and it is normally used as a standard tool for reconstruction of ultra fast density profiles in the edge region of COMPASS plasmas. The purpose of this study is to investigate the advantages and limitations of the COMPASS Li-BES system in characterizing plasma electron density fluctuations. We show how the atomic physics of plasma-beam interactions can affect the interpretation of the measurement at different radial positions and for different electron density profiles. We also demonstrate the usability of generalized sequential probability ratio test for automatic event detection. Using non-perturbative diagnostic, we verify the validity of the stochastic Garcia-model for scrape-off layer filaments and accompanying holes (density deficits).
COMPASS addressed several physical processes that may explain the behaviour of important phenomena. This paper presents results related to the main fields of COMPASS research obtained in the recent two years, including studies of turbulence, L–H transition, plasma material interaction, runaway electron, and disruption physics: Tomographic reconstruction of the edge/SOL turbulence observed by a fast visible camera allowed to visualize turbulent structures without perturbing the plasma. Dependence of the power threshold on the X-point height was studied and related role of radial electric field in the edge/SOL plasma was identified. The effect of high-field-side error fields on the L–H transition was investigated in order to assess the influence of the central solenoid misalignment and the possibility to compensate these error fields by low-field-side coils. Results of fast measurements of electron temperature during ELMs show the ELM peak values at the divertor are around 80% of the initial temperature at the pedestal. Liquid metals were used for the first time as plasma facing material in ELMy H-mode in the tokamak divertor. Good power handling capability was observed for heat fluxes up to 12 MW m−2 and no direct droplet ejection was observed. Partial detachment regime was achieved by impurity seeding in the divertor. The evolution of the heat flux footprint at the outer target was studied. Runaway electrons were studied using new unique systems—impact calorimetry, carbon pellet injection technique, wide variety of magnetic perturbations. Radial feedback control was imposed on the beam. Forces during plasma disruptions were monitored by a number of new diagnostics for vacuum vessel (VV) motion in order to contribute to the scaling laws of sideways disruption forces for ITER. Current flows towards the divertor tiles, incl. possible short-circuiting through PFCs, were investigated during the VDE experiments. The results support ATEC model and improve understanding of disruption loads.
Our proposed method for exploring the causal discovery of stochastic dynamic systems is designed to overcome the limitations of existing methods in detecting hidden and common drivers. The method is based on a simple principle and is presented in a nonparametric structural vector autoregressive modeling framework.
1 November 2018 in Review of Scientific Instruments
The atomic beam probe diagnostic concept aims at measuring the edge magnetic field and through that edge current distribution in fusion plasmas by observing trajectories of an ion beam stemming from a diagnostic neutral beam. The diagnostic potentially has microsecond scale time resolution and can thus prove to be a powerful option to study fast changes in the edge plasma. A test detector has been installed on the COMPASS tokamak as an extension of the existing lithium beam diagnostic system. It employs a relatively simple concept of an array of conductive detection plates measuring the incident ion current, which is then amplified and converted to a voltage signal. The aim of the test detector is to experimentally examine the idea of the diagnostic and provide background data for design and installation of a final detector. Also, a numerical code based on the CUDA parallel computing platform has been developed for modeling lithium ion trajectories in the given COMPASS plasma discharges. We present the developments of the detector design and test measurements of the diagnostic performed both in a laboratory beam system and on the COMPASS tokamak.
We introduce the Anisotropic Self-Organizing Map (ASOM), a novel neural network-based approach for inferring hidden common drivers in nonlinear dynamical systems from observed time series. Grounded in topological theorems, our method integrates time-delay embedding, intrinsic dimension estimation, and a new anisotropic training scheme for Kohonen's self-organizing map, enabling the precise decomposition of attractor manifolds into autonomous and shared components of the dynamics. We validated ASOM through simulations involving chaotic maps, where two driven systems were influenced by a hidden nonlinear driver. The inferred time series showed a strong correlation with the actual hidden common driver, unlike the observed systems. We further compared our reconstruction performance against several established methods for identifying shared features in time series, including PCA, kernel PCA, ICA, dynamical component analysis, canonical correlation analysis, deep canonical correlation analysis, traditional self-organizing map, and recent recurrence-based approaches. Our results demonstrate ASOM's superior accuracy and robustness in recovering latent dynamics, providing a powerful tool for unsupervised learning of hidden causal structures in complex systems.