We use high-temperature-stable silicon nitride membranes to investigate single layers of silicon nanocrystal ensembles by energy filtered transmission electron microscopy. The silicon nanocrystals are prepared from the precipitation of a silicon-rich oxynitride layer sandwiched between two SiO2 diffusion barriers and subjected to a high-temperature annealing. We find that such single layers are very sensitive to the annealing parameters and may lead to a significant loss of excess silicon. In addition, these ultrathin layers suffer from significant electron beam damage that needs to be minimized in order to image the pristine sample morphology. Finally we demonstrate how the silicon nanocrystal size distribution develops from a broad to a narrow log-normal distribution, when the initial precipitation layer thickness and stoichiometry are below a critical value.
The brittleness of acrylic photopolymers, frequently used in 3D Inkjet printing, limits their utilization in structural applications. In this study, a process was developed for the production and characterization of an alumina-enhanced nanocomposite with improved mechanical properties for Inkjet printing. Ceramic nanoparticles with an average primary particle size (APPS) of 16 nm and 31 nm, which was assessed via high-resolution scanning electron microscopy (HRSEM), were functionalized with 3.43 and 5.59 mg/m2 3-(trimethoxysilyl)propyl methacrylate (MPS), respectively, while being ground in a ball mill. The suspensions of the modified fillers in a newly formulated acrylic mixture showed viscosities of 14 and 7 mPa∙s at the printing temperature of 60 °C. Ink-jetting tests were conducted successfully without clogging the printing nozzles. Tensile tests of casted specimens showed an improvement of the tensile strength and elongation at break in composites filled with 31 nm by 10.7% and 74.9%, respectively, relative to the unfilled polymer.
We report on an in-situ oxidation effect during annealing of SiO2/SiO1.0N0.23 multilayers prepared by plasma enhanced chemical vapour deposition (PECVD). This in-situ oxidation leads to an undesired growth of the tunneling oxide and also affects the silicon nanocrystal (SiNC) size control, i.e., a NC shrinkage. The origin of this oxidation is identified to be a “quasi-wet” oxidation by O–H groups incorporated in the PECVD-SiO2 barrier layers. By varying the thickness of the PECVD-SiO2 layer underneath a single SiO1.0N0.23 layer, the extent of NC oxidation is tuned. The shrinkage of SiNCs is proven by a blueshift of the photoluminescence peak position as well as by transmission electron microscopy.
11 October 2018 in The Journal of Physical Chemistry C