A numerical simulation of the steady-state, laminar, axisymmetric, natural convection heat transfer in the annulus between two concentric vertical cylinders using porous inserts is studied. A finite volume code is used to numerically solve the sets of governing equations. The Darcy-Brinkman-Forchheimer model along with Boussinesq approximation is used to solve for the flow in the porous region. The Navier-Stokes equation is used to describe the flow in the clear flow region. The dependence of the average Nusselt Number on several flow, fluid and geometric parameters is investigated. These include Rayleigh number, Ra, Darcy number, Da, thermal conductivity ratio, Kr, ratio of porous-inserts spacing to porous-insert width (S/W), and ratio of porous-insert length to gap (H/D). It is found that the heat transfer characteristics can be strongly affected by the presence of porous inserts. It found that there is a critical thermal conductivity ratio where below this value the porous medium acts as a thermal insulation material and beyond this value it acts as a fin. The values of Kr for different flow cases are found and presented.
1 May 2020 in International Journal of Refrigeration
A numerical simulation of the steady two-dimensional laminar natural convection heat transfer for the gaseous low-pressure flows in the annulus region between two concentric horizontal cylinders is carried out. This type of flow occurs in “evacuated” solar collectors and in the receivers of the solar parabolic trough collectors. A finite volume code is used to solve the coupled set of governing equations. Boussinesq approximation is utilized to model the buoyancy effect. A correlation for the thermal conductivity ratio (k r = k eff/k) in terms of Knudsen number and the modified Rayleigh number is proposed for Prandtl number (Pr = 0.701). It is found that as Knudsen number increases then the thermal conductivity ratio decreases for a given Rayleigh number. Also, it is shown that the thermal conductivity ratio k r increases as Rayleigh number increases. It appears that there is no consistent trend for varying the dimensionless gap spacing between the inner and the outer cylinder ( $$\overline{{L_{g} }}$$ L g ¯ ) on the thermal conductivity ratio (k r) for the considered spacing range.