Aiman Alshare

Dr. Aiman Alshare

German Jordanian University; Madaba Street; 11180-Amman-Jordan
orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2019 in Rapid Prototyping Journal
Verified
Journal Article
Closed access
AAAiman Alshare
Aiman Alshare
FCFedrico Calzone
Fedrico Calzone
MMMaurizio Muzzupappa
Maurizio Muzzupappa
Purpose: The purpose of this study is to investigate the feasibility of using additive manufacturing (AM) technique to produce an efficient valve manifold for hydraulic actuator by redesigning valve blocks produced by conventional methods. Design/methodology/approach: A priori, a computational fluid dynamics (CFD) analysis was carried out using the software ANSYS Fluent to determine the optimal flow path that results in least pressure drop, highest average velocity and least energy losses. Fluid–structure interaction (FSI) simulations, processed with imported pressure distribution from the CFD, were conducted to determine the resulting loading and deformations of the manifold assembly. Findings: The new design offers a 23 per cent reduction of oil volume in the circuit, while weighing 84 per cent less. When using the new design, a decrease of pressure drop by nearly 25 per cent and an increase in the average velocity by 2.5 per cent is achieved. A good agreement, within 16 per cent, is found in terms of the pressure drop between the experiment and computational model. Originality/value: It is possible to build an efficient hydraulic manifold design by iterative refinement for adequate production via selective laser melting (SLM) and minimize used material to circumventing building support structures in non-machinable features of the manifold.

19 April 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
AAAiman Alshare
Aiman Alshare
aissa abderrahmaneaissa abderrahmane
aissa abderrahmane
KGKamel Guedri
Kamel Guedri
OTObai Younis Taha
Obai Younis Taha
Md. Fayz-Al-AsadMd. Fayz-Al-Asad
Md. Fayz-Al-Asad
WAWael Al-Kouz
Wael Al-Kouz
This work investigates mixed convection in a lid-driven cavity. This cavity is filled with nanofluid and subjected to a magnetic field. The concentric ovoid cavity orientation (γ),  0–90°, and undulation number (N), 1–4, are considered. The Richardson number (Ri) varies between 1 and 100. The nanofluid volume fraction (φ) ranges between 0 and 0.08%. The effect of the parameters on flow, thermal transport, and entropy generation is illustrated by the stream function, isotherms, and isentropic contours. Heat transfer is augmented and the Nusselt number rises with higher Ri, γ, N, and φ. The simulations show that the heat transfer is responsible for entropy generation, while frictional and magnetic effects are marginal.

22 July 2015 in Micromachines
Verified
Journal Article
Open access
PDF file
AAAlaaldeen Al-Halhouli
Alaaldeen Al-Halhouli
AAAiman Alshare
Aiman Alshare
MMMukeet Mohsen
Mukeet Mohsen
MMMaher Matar
Maher Matar
Andreas DietzelAndreas Dietzel
Andreas Dietzel
SBStephanus Büttgenbach
Stephanus Büttgenbach
This study presents experiments and computational simulations of single-layer passive micromixer designs. The proposed designs consist of chains of interlocking semicircles and omega-shaped mixing modules. The performance of the new designs is compared with the concentric spiral channel configuration. The micromixers are intended to be integrated into a lab on chip (LOC) micro-system that operates under continuous flow conditions. The purpose behind the multi-curvature in these designs is the introduction of Dean vortices in addition to molecular diffusion in order to enhance the mixing performance. The micromixers were fabricated in PDMS (Polydimethylsiloxane) and bonded to a glass substrate. A three-dimensional computational model of micromixers was carried out using Fluent ANSYS. In experiments, the mixing of a 1 g/L fluorescein isothiocyanate diluted in distilled water was observed and photographed using a charge-coupled device (CCD) microscopic camera. The obtained images were processed to determine the mixing intensity at different Reynolds numbers. The standard deviation (σ) of the fluorescence indicates the mixing completeness, which was calculated along the width of the channel at various locations downstream from the channel inlet. The value of σ = 0.5 indicates unmixed streams and 0 is for complete mixing. It is found that the two new designs have a standard deviation of nearly 0.05. Additionally, complete mixing was observed at the channel outlet as demonstrated by the fluorescence images and the numerical results. However, the location of complete mixing at different positions depends on the Reynolds number, which varies between 0.01 and 50. Good agreement was found between the experiment and the numerical results. A correlation to predict the length scale where complete mixing can be achieved is given in terms of the radius of curvature, the mixing module, and the Reynolds number.

1 March 2019 in Energy
Verified
Journal Article
Closed access
THTareq Abu Hamed
Tareq Abu Hamed
AAAiman Alshare
Aiman Alshare
HEHossam El-Khalil
Hossam El-Khalil

3 March 2020 in Processes
Verified
Journal Article
Open access
PDF file
AAAiman Alshare
Aiman Alshare
WAWael Al-Kouz
Wael Al-Kouz
WKWaqar Khan
Waqar Khan
The present work is a computational investigation of nanofluid and hybrid nanofluid transport in a periodic structure. The governing equations for this work along with the appropriate boundary conditions are solved using the finite-volume method. The simulations are carried out using five wavy amplitudes of the channel shape for a range of Reynolds numbers from 102 to103. It is found that increasing the amplitude and increasing the nanoparticle volume fraction achieve enhancement of the heat transfer at the cost of increased pumping power. Correlations for the friction factor and the Nusselt number for both fluid types are provided.

26 April 2016 in SpringerPlus
Verified
Journal Article
Open access
PDF file
WAWael Al-Kouz
Wael Al-Kouz
AAAiman Alshare
Aiman Alshare
AAAmmar Alkhalidi
Ammar Alkhalidi
SKSuhil Kiwan
Suhil Kiwan
A numerical simulation of the steady two-dimensional laminar natural convection heat transfer for the gaseous low-pressure flows in the annulus region between two concentric horizontal cylinders is carried out. This type of flow occurs in “evacuated” solar collectors and in the receivers of the solar parabolic trough collectors. A finite volume code is used to solve the coupled set of governing equations. Boussinesq approximation is utilized to model the buoyancy effect. A correlation for the thermal conductivity ratio (k r = k eff/k) in terms of Knudsen number and the modified Rayleigh number is proposed for Prandtl number (Pr = 0.701). It is found that as Knudsen number increases then the thermal conductivity ratio decreases for a given Rayleigh number. Also, it is shown that the thermal conductivity ratio k r increases as Rayleigh number increases. It appears that there is no consistent trend for varying the dimensionless gap spacing between the inner and the outer cylinder ( $$\overline{{L_{g} }}$$ L g ¯ ) on the thermal conductivity ratio (k r) for the considered spacing range.