Characteristics of thin layer microwave drying of apple were evaluated in a laboratory scale microwave dryer at 2450MHz. The drying experiments were carried out at 200, 400 and 600W. The experimental data were fitted to nine drying models. The models were compared using the coefficient of determination (R2), root mean square error (RMSE) and reduced chi-square (χ2). The Midilli et al. model best described the drying curve of apple slices. The effective moisture diffusivity was determined by using Fick’s second law and was observed to lie between 3.93×10−7 and 2.27×10−6m2/s for the apple samples. The microwave power dependence of the effective diffusivity coefficient followed an Arrhenius-type relationship. The activation energy for the moisture diffusion was determined to be 12.15W/g. The highest energy efficiency was recorded for the samples dried at 600W as 54.34% and lowest at 200W as 17.42%
7 May 2016 in Journal of Food Science and Technology
The energy and exergy analysis, drying characteristics and mathematical modeling of the thin-layer drying kinetics of white mulberry using microwave drying were investigated. Results indicated that values of exergy efficiency (33.63–57.08%) were higher than energy efficiency (31.85–55.56%). Specific energy consumption increased with increasing microwave power while improvement potential decreased. The specific energy consumption and improvement potential varied from 3.97 to 6.73 MJ/kg water and 0.71 to 2.97 MJ/kg water, respectively. Also, energy efficiency decreased with decrease in moisture content and microwave power level. The best exergy and energy aspect was obtained by drying at 100 W microwave power. Drying took place mainly in warming up, constant rate and falling rate periods. The Page model showed the best fit to experimental drying data. Effective diffusivity increased with decreasing moisture content and increasing microwave power. It varied from 1.06 × 10 −8 to 3.45 × 10 −8 m 2 /s, with an energy activation of 3.986 W/g.
The effect of the microwave-convective drying technique on the moisture ratio, drying rate, drying time, effective moisture diffusivity, microwave specific energy consumption, and energy efficiency of sunflower seedswere investigated.Drying took place in the falling rate period. Increasing the microwave power caused a significant decrease in the drying time. The drying data were fitted to four thin-layer drying models. The performance of these models was compared using the coefficient of determination, reduced chi-square and root mean square error between the observed and predicted moisture ratios. The results showed that the Page model was found to satisfactorily describe themicrowave-convective drying curves of sunflower seeds. The effective moisture diffusivity values were estimated from Fick diffusion model and varied from 1.73 10-7 to 4.76 10-7m2s-1. Increasing the microwave power resulted in a considerable increase in drying efficiency and a significant decrease in microwave specific energy consumption. The highest energy efficiency and the lowestmicrowave specific energy consumption were obtained at the microwave power of 300 W.
Parboiling is a type of heat pretreatment used in rice processing to reach higher head rice yield and improve the nutrition properties of raw rice. In this research, the goals were prediction and determination of optimum conditions for parboiled rice processing using the response surface method (RSM) as well as modeling the output values by linear regression (LR) and artificial neural networks (ANN). The parameters including steaming time (0, 5, 10, and 15 min), dryer type (solar and continuous dryers), and drying air temperature (35, 40, and 45°C) were employed as input values. In addition, the breakage resistance (BR) and head rice yield (HRY) were selected as output values. The ANN‐based nonlinear regression, the multi‐layer perceptron (MLP), and the radial basis function (RBF) have been developed to model the process parameters, as well as the central composite design (CCD) was conducted for optimization of BR and HRY values. The outputs of RBF network have been successfully applied to predict higher coefficient of determination of BR and HRY as 0.989 and 0.986, respectively, indicating the appropriateness of the model equation in predicting head rice yield and breakage resistance when the three processing variables (steaming time, dryer type, and drying air temperature) are mathematically combined. Also, the lower root mean square error (RMSE) was obtained for each one as 0.043 and 0.041. The optimum values of BR and HRY were obtained as 12.80 N and 67.3%, respectively, at 9.62 min and 36.9°C for a solar dryer with a desirability of 0.941. In addition, the same values were obtained as 14.50 N and 72.1%, respectively, at 8.77 min and 37.0°C for a continuous dryer with a desirability of 0.971.
Glyceraldehyde-3-phosphate dehydrogenase (GAPDH), which plays an important role in central carbon metabolism, was studied in Aeluropus lagopoides, which is an important perennial grass found in drought-stricken areas and deserts from Africa to South Asia. Aeluropus lagopoides is an ideal candidate plant system to identify novel or enhanced stress tolerance mechanisms. The GAPDH has stable expression under different conditions and it is a typical housekeeping gene in prokaryotes and eukaryotes. So far, there are no reports about identification of housekeeping genes for gene expression analysis in Aeluropus lagopoides. Thus in the present study, a GAPDH cDNA was cloned and sequenced from this plant. Our results revealed that the open reading frame (ORF) (1014 bp) encoded a polypeptide of 337 amino-acid residues. The deduced amino acid sequence indicated a protein with a molecular weight of 364.95 kDa and estimated isoelectric point value of 7.06. Multiple alignments of putative amino acid sequences indicated high similarity between Aeluropus lagopoides GAPDH and analogous protein derived from other plants, particularly monocots. Nucleotide blast and phylogenetic analysis revealed that this plant had maximum identity with Cleistogenes songorica. Results of this experiment can help us do transcriptional analysis by qRT-PCR to identify stress-tolerance mechanisms.