Characteristics of thin layer microwave drying of apple were evaluated in a laboratory scale microwave dryer at 2450MHz. The drying experiments were carried out at 200, 400 and 600W. The experimental data were fitted to nine drying models. The models were compared using the coefficient of determination (R2), root mean square error (RMSE) and reduced chi-square (χ2). The Midilli et al. model best described the drying curve of apple slices. The effective moisture diffusivity was determined by using Fick’s second law and was observed to lie between 3.93×10−7 and 2.27×10−6m2/s for the apple samples. The microwave power dependence of the effective diffusivity coefficient followed an Arrhenius-type relationship. The activation energy for the moisture diffusion was determined to be 12.15W/g. The highest energy efficiency was recorded for the samples dried at 600W as 54.34% and lowest at 200W as 17.42%
In the present research work, a machine learning tool based on the gradient boosted regression trees (GBRT) was used to predict the HHV of biomass. Data of 511 biomass samples were used to develop GBRT for prediction of HHV by utilizing proximate analysis. The values of mean absolute percentage error, root-mean-square error, and the determination coefficient for the developed model were 3.783%, 0.946, and 0.93, respectively, which represents high precision of HHV predictive capability. By comparing the models used to predict HHV, it was proved that the proposed model is better than the models found in literature so far.
Drying is an energy-intensive process. In general, heating and evaporation require large quantities of energy. This study has been conducted to evaluate analysis for dying apple slices in two drying systems including hot-air convection and infrared drying. The apple samples were dried at temperatures of 90, 120 and 150°C and radiation intensity of 0.22, 0.31 and 0.49 W/cm2 in the hot-air and infrared dryer, respectively. The results showed that the minimum energy consumed for drying apple slices in infrared dryer was 1 kW h while minimum energy consumption in hot air dryer was 7.02 kW h. Also, the specific energy consumption in IR dying was about 82-86% shorter than that of hot-air drying. The value of SEC of apple under IR and hot air drying was ranged from 110.35 to 71.78 kWh/kgwater and 635.53 to 501.15 kWh/Kgwater, respectively. The calculated value of moisture diffusivity varied from 3.499×10-7-4.746×10-7 m2/sec and 3.671×10-7-5.101×10-7 m2/sec and the value of energy activation were found to be 140.1 and 94.62 kJ moL-1 for IR and hot air drying, respectively. Therefore, one way to improve drying operations is to use infrared energy.